From: Murali Karicheri <m-karicheri2@ti.com>
To: Murali Karicheri <m-karicheri2@ti.com>
Cc: alan@linux.intel.com, gregkh@linuxfoundation.org,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-keystone@list.ti.com
Subject: Re: [RESEND PATCH 2/2] Documentation: of-serial.txt - update for clocks phandle for clk
Date: Tue, 16 Oct 2012 11:33:40 -0400 [thread overview]
Message-ID: <507D7E54.3050101@ti.com> (raw)
In-Reply-To: <1350401051-8254-2-git-send-email-m-karicheri2@ti.com>
On 10/16/2012 11:24 AM, Murali Karicheri wrote:
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
>
> diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> index 0847fde..423b7ff 100644
> --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> @@ -14,7 +14,10 @@ Required properties:
> - "serial" if the port type is unknown.
> - reg : offset and length of the register set for the device.
> - interrupts : should contain uart interrupt.
> -- clock-frequency : the input clock frequency for the UART.
> +- clock-frequency : the input clock frequency for the UART
> + or
> + clocks phandle to refer to the clk used as per Documentation/devicetree
> + /bindings/clock/clock-bindings.txt
>
> Optional properties:
> - current-speed : the current active speed of the UART.
WARNING: multiple messages have this Message-ID (diff)
From: Murali Karicheri <m-karicheri2@ti.com>
To: Murali Karicheri <m-karicheri2@ti.com>
Cc: <alan@linux.intel.com>, <gregkh@linuxfoundation.org>,
<linux-serial@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-keystone@list.ti.com>
Subject: Re: [RESEND PATCH 2/2] Documentation: of-serial.txt - update for clocks phandle for clk
Date: Tue, 16 Oct 2012 11:33:40 -0400 [thread overview]
Message-ID: <507D7E54.3050101@ti.com> (raw)
In-Reply-To: <1350401051-8254-2-git-send-email-m-karicheri2@ti.com>
On 10/16/2012 11:24 AM, Murali Karicheri wrote:
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
>
> diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> index 0847fde..423b7ff 100644
> --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> @@ -14,7 +14,10 @@ Required properties:
> - "serial" if the port type is unknown.
> - reg : offset and length of the register set for the device.
> - interrupts : should contain uart interrupt.
> -- clock-frequency : the input clock frequency for the UART.
> +- clock-frequency : the input clock frequency for the UART
> + or
> + clocks phandle to refer to the clk used as per Documentation/devicetree
> + /bindings/clock/clock-bindings.txt
>
> Optional properties:
> - current-speed : the current active speed of the UART.
next prev parent reply other threads:[~2012-10-16 15:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1350401051-8254-1-git-send-email-m-karicheri2@ti.com>
2012-10-16 15:32 ` [RESEND PATCH 1/2] of serial port driver - add clk_get_rate() support Murali Karicheri
2012-10-16 15:32 ` Murali Karicheri
[not found] ` <1350401051-8254-2-git-send-email-m-karicheri2@ti.com>
2012-10-16 15:33 ` Murali Karicheri [this message]
2012-10-16 15:33 ` [RESEND PATCH 2/2] Documentation: of-serial.txt - update for clocks phandle for clk Murali Karicheri
2012-10-22 15:58 [RESEND PATCH 1/2] of serial port driver - add clk_get_rate() support Murali Karicheri
2012-10-22 15:58 ` [RESEND PATCH 2/2] Documentation: of-serial.txt - update for clocks phandle for clk Murali Karicheri
2012-10-22 15:58 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=507D7E54.3050101@ti.com \
--to=m-karicheri2@ti.com \
--cc=alan@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-keystone@list.ti.com \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.