From: "Raphaël Assénat" <raph@8d.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Add support for eco5-pk ARM board
Date: Fri, 19 Oct 2012 13:16:12 -0400 [thread overview]
Message-ID: <50818ADC.8040300@8d.com> (raw)
In-Reply-To: <50818973.4030906@ti.com>
On 19/10/12 01:10 PM, Tom Rini wrote:
> On 10/19/12 09:56, Rapha?l Ass?nat wrote:
>> On 15/10/12 02:25 PM, Tom Rini wrote:
>>> On Mon, Jul 16, 2012 at 09:31:36AM -0000, Raphael Assenat wrote:
>>>
>>>> This patch adds support for the 8D Technologies ECO5-PK board
>>>> which is based on the TI AM3505 ARM SOC.
>>>>
>>>> Signed-off-by: Raphael Assenat <raph@8d.com>
>>>
>>> Sorry for the late reply, please add a MAINTAINERS entry.
>>>
>> Thanks, please see below for an updated patch.
>
>> Regards, Rapha?l Ass?nat
>
>> This patch adds support for the 8D Technologies ECO5-PK board which
>> is based on the TI AM3505 SOC.
>
>> Signed-off-by: Raphael Assenat <raph@8d.com>
>
>> diff --git a/MAINTAINERS b/MAINTAINERS index ff8e47c..7a5676f
>> 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -571,6 +571,10 @@
>> Albert ARIBAUD <albert.u.boot@aribaud.net>
>
>> edminiv2 ARM926EJS (Orion5x SoC)
>
>> +Raphael Assenat <raph@8d.com> + + am3517_evm ARM ARMV7 (AM35x
>> SoC)
>
> Right spot, wrong board :) Should be eco5pk
>
Ah yes indeed, sorry about that. Here is a new version:
This patch adds support for the 8D Technologies ECO5-PK board which is
based on the TI AM3505 SOC.
Signed-off-by: Raphael Assenat <raph@8d.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index ff8e47c..2f2d597 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -571,6 +571,10 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
edminiv2 ARM926EJS (Orion5x SoC)
+Raphael Assenat <raph@8d.com>
+
+ eco5pk ARM ARMV7 (AM35x SoC)
+
Stefano Babic <sbabic@denx.de>
ea20 davinci
diff --git a/board/8dtech/eco5pk/Makefile b/board/8dtech/eco5pk/Makefile
new file mode 100644
index 0000000..befe60a
--- /dev/null
+++ b/board/8dtech/eco5pk/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Adapted from ti/evm/Makefile
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := eco5pk.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c
new file mode 100644
index 0000000..ddc5274
--- /dev/null
+++ b/board/8dtech/eco5pk/eco5pk.c
@@ -0,0 +1,61 @@
+/*
+ * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board
+ *
+ * Based on am3517evm.c
+ *
+ * Copyright (C) 2011-2012 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <crc.h>
+#include <asm/mach-types.h>
+#include "eco5pk.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ gpio_request(30, "RESOUT");
+ gpio_direction_output(30,1);
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_ECO5_PK();
+}
diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h
new file mode 100644
index 0000000..0e60ef8
--- /dev/null
+++ b/board/8dtech/eco5pk/eco5pk.h
@@ -0,0 +1,402 @@
+/*
+ * eco5.h - Header file for the 8D Technologies ECO5 board.
+ *
+ * Based on am3517evm.h
+ * Based on ti/evm/evm.h
+ *
+ * Copyright (C) 2011 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ECO5PK_H__
+#define _ECO5PK_H__
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "ECO5 Board",
+ "NAND",
+};
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_ECO5_PK() \
+ /* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_CKE0), (M0)) \
+ MUX_VAL(CP(SDRC_CKE1), (M0)) \
+ MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) /*sdrc_strben_dly0*/\
+ MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) /*sdrc_strben_dly1*/\
+ /* GPMC */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) /* GPT10_PWM_OUT */ \
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
+ /* - ETH_nRESET*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \
+ /* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) /* LCD_D0 */ \
+ MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) /* LCD_D1 */ \
+ MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) /* LCD_D2 */ \
+ MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) /* LCD_D3 */ \
+ MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) /* LCD_D4 */ \
+ MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) /* LCD_D5 */ \
+ MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) /* LCD_D6 */ \
+ MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) /* LCD_D7 */ \
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) /* LCD_NWR */ \
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) /* LCD_NRD */ \
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) /* LCD_NCE */ \
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) /* LCD_CD */ \
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) /* LCD_NRST */ \
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) /* LCD_FS */ \
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) /* LCD_RV */ \
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) /* LCD_DIR */ \
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) /* LCD_NOE */ \
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) /* LCD_PWR_EN */ \
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
+ /* CAMERA */\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+ /* - CAM_RESET*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
+ /* MMC */\
+ MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /* WriteProtect */\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /* CardDetect*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
+ \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \
+ /* McBSP */\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \
+ \
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\
+ /* - LCD_INI*/\
+ MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+ /* - LCD_ENVDD */\
+ MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+ /* - LCD_QVGA/nVGA */\
+ MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\
+ /* - LCD_RESB */\
+ /* UART */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
+ /* I2C */\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
+ /* McSPI */\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\
+ /* - LAN_INTR*/\
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
+ MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) /* LCD_EN_BACKLIGHT */ \
+ /* CCDC */\
+ MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
+ /* RMII */\
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
+ MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
+ /* HECC */\
+ MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
+ /* HSUSB */\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
+ /* HDQ */\
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \
+ /* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) /*SYS_nRESWARM */\
+ /* - GPIO30 */\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
+ /* - PEN_IRQ */\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+ /* - VIO_1V8*/\
+ MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
+ /* JTAG */\
+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \
+ /* ETK (ES2 onwards) */\
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D0_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D1_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D2_ES2 ), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(ETK_D3_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D4_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D5_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D6_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D7_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D8_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D9_ES2 ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \
+ /* Die to Die */\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index df62251..1929f30 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -240,6 +240,7 @@ mx6qarm2 arm armv7 mx6qarm2 freesca
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+eco5pk arm armv7 eco5pk 8dtech omap3
cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h
new file mode 100644
index 0000000..5056d2e
--- /dev/null
+++ b/include/configs/eco5pk.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2012 8D Technologies inc.
+ * Based on mt_ventoux.h, original banner below:
+ *
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#undef CONFIG_USB_EHCI
+#undef CONFIG_USB_EHCI_OMAP
+#undef CONFIG_USB_OMAP3
+#undef CONFIG_CMD_USB
+
+/* Our console port is port3 */
+#undef CONFIG_CONS_INDEX
+#undef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SERIAL1
+
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3
+
+#define MACH_TYPE_ECO5_PK 4017
+#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK
+
+#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "ECO5-PK # "
+#define CONFIG_SYS_PROMPT V_PROMPT
+
+/*
+ * Set its own mtdparts, different from common
+ */
+#undef MTDIDS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand),1024k(uboot-nand),256k(params-nand),256k(logo),5120k(kernel),-(ubifs)"
+
+/*
+ * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten.
+ */
+#undef CONFIG_ENV_OFFSET_REDUND
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
+ "install_kernel=if dhcp $bootfile; then nand erase kernel; nand write $fileaddr kernel; fi\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "serverip=192.168.142.60\0"
+
+
+#endif /* __CONFIG_H */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3045 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121019/cb3e1625/attachment.bin>
next prev parent reply other threads:[~2012-10-19 17:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-16 19:31 [U-Boot] [PATCH] Add support for eco5-pk ARM board Raphael Assenat
2012-10-15 18:25 ` [U-Boot] " Tom Rini
2012-10-19 16:56 ` Raphaël Assénat
2012-10-19 17:10 ` Tom Rini
2012-10-19 17:16 ` Raphaël Assénat [this message]
2012-10-19 20:15 ` Albert ARIBAUD
2012-10-22 15:23 ` [U-Boot] [PATCH 0/2] eco5pk: Add support for the eco5pk " Raphael Assenat
2012-10-22 15:23 ` [U-Boot] [PATCH 1/2] eco5pk: Add new board and default config Raphael Assenat
2012-10-22 15:23 ` [U-Boot] [PATCH 2/2] eco5pk: Add board config and MAINTAINERS entry Raphael Assenat
2012-10-22 15:38 ` [U-Boot] [PATCH 0/2] eco5pk: Add support for the eco5pk ARM board Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50818ADC.8040300@8d.com \
--to=raph@8d.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.