From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Saatvik Arya <aryasaatvik@gmail.com>
Cc: gregkh@linuxfoundation.org, mchehab@osg.samsung.com,
linux-media@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drivers: staging: media: davinci_vpfe: dm365_resizer: fixed some spelling mistakes
Date: Tue, 22 Nov 2016 21:18:05 +0200 [thread overview]
Message-ID: <5085070.7aCI71b85W@avalon> (raw)
In-Reply-To: <20160203022642.GA6944@sinister>
Hi Saatvik,
Thank you for the patch, and sorry for the late reply.
On Wednesday 03 Feb 2016 07:56:42 Saatvik Arya wrote:
> fixed spelling mistakes which reffered to OUTPUT as OUPUT
>
> Signed-off-by: Saatvik Arya <aryasaatvik@gmail.com>
I've picked the patch up and applied it to my tree. I will send a pull request
to get it merged in the mainline kernel in v4.11.
> ---
> drivers/staging/media/davinci_vpfe/dm365_resizer.c | 22 +++++++++----------
> drivers/staging/media/davinci_vpfe/dm365_resizer.h | 2 +-
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/staging/media/davinci_vpfe/dm365_resizer.c
> b/drivers/staging/media/davinci_vpfe/dm365_resizer.c index acb293e..10f51f4
> 100644
> --- a/drivers/staging/media/davinci_vpfe/dm365_resizer.c
> +++ b/drivers/staging/media/davinci_vpfe/dm365_resizer.c
> @@ -495,7 +495,7 @@ resizer_configure_in_continious_mode(struct
> vpfe_resizer_device *resizer) int line_len;
> int ret;
>
> - if (resizer->resizer_a.output != RESIZER_OUPUT_MEMORY) {
> + if (resizer->resizer_a.output != RESIZER_OUTPUT_MEMORY) {
> dev_err(dev, "enable resizer - Resizer-A\n");
> return -EINVAL;
> }
> @@ -507,7 +507,7 @@ resizer_configure_in_continious_mode(struct
> vpfe_resizer_device *resizer) param->rsz_en[RSZ_B] = DISABLE;
> param->oper_mode = RESIZER_MODE_CONTINIOUS;
>
> - if (resizer->resizer_b.output == RESIZER_OUPUT_MEMORY) {
> + if (resizer->resizer_b.output == RESIZER_OUTPUT_MEMORY) {
> struct v4l2_mbus_framefmt *outformat2;
>
> param->rsz_en[RSZ_B] = ENABLE;
> @@ -1048,13 +1048,13 @@ static void resizer_ss_isr(struct
> vpfe_resizer_device *resizer) if (ipipeif_sink != IPIPEIF_INPUT_MEMORY)
> return;
>
> - if (resizer->resizer_a.output == RESIZER_OUPUT_MEMORY) {
> + if (resizer->resizer_a.output == RESIZER_OUTPUT_MEMORY) {
> val = vpss_dma_complete_interrupt();
> if (val != 0 && val != 2)
> return;
> }
>
> - if (resizer->resizer_a.output == RESIZER_OUPUT_MEMORY) {
> + if (resizer->resizer_a.output == RESIZER_OUTPUT_MEMORY) {
> spin_lock(&video_out->dma_queue_lock);
> vpfe_video_process_buffer_complete(video_out);
> video_out->state = VPFE_VIDEO_BUFFER_NOT_QUEUED;
> @@ -1064,7 +1064,7 @@ static void resizer_ss_isr(struct vpfe_resizer_device
> *resizer)
>
> /* If resizer B is enabled */
> if (pipe->output_num > 1 && resizer->resizer_b.output ==
> - RESIZER_OUPUT_MEMORY) {
> + RESIZER_OUTPUT_MEMORY) {
> spin_lock(&video_out->dma_queue_lock);
> vpfe_video_process_buffer_complete(video_out2);
> video_out2->state = VPFE_VIDEO_BUFFER_NOT_QUEUED;
> @@ -1074,7 +1074,7 @@ static void resizer_ss_isr(struct vpfe_resizer_device
> *resizer)
>
> /* start HW if buffers are queued */
> if (vpfe_video_is_pipe_ready(pipe) &&
> - resizer->resizer_a.output == RESIZER_OUPUT_MEMORY) {
> + resizer->resizer_a.output == RESIZER_OUTPUT_MEMORY) {
> resizer_enable(resizer, 1);
> vpfe_ipipe_enable(vpfe_dev, 1);
> vpfe_ipipeif_enable(vpfe_dev);
> @@ -1242,8 +1242,8 @@ static int resizer_do_hw_setup(struct
> vpfe_resizer_device *resizer) struct resizer_params *param =
> &resizer->config;
> int ret = 0;
>
> - if (resizer->resizer_a.output == RESIZER_OUPUT_MEMORY ||
> - resizer->resizer_b.output == RESIZER_OUPUT_MEMORY) {
> + if (resizer->resizer_a.output == RESIZER_OUTPUT_MEMORY ||
> + resizer->resizer_b.output == RESIZER_OUTPUT_MEMORY) {
> if (ipipeif_sink == IPIPEIF_INPUT_MEMORY &&
> ipipeif_source == IPIPEIF_OUTPUT_RESIZER)
> ret = resizer_configure_in_single_shot_mode(resizer);
> @@ -1268,7 +1268,7 @@ static int resizer_set_stream(struct v4l2_subdev *sd,
> int enable) if (&resizer->crop_resizer.subdev != sd)
> return 0;
>
> - if (resizer->resizer_a.output != RESIZER_OUPUT_MEMORY)
> + if (resizer->resizer_a.output != RESIZER_OUTPUT_MEMORY)
> return 0;
>
> switch (enable) {
> @@ -1722,7 +1722,7 @@ static int resizer_link_setup(struct media_entity
> *entity, }
> if (resizer->resizer_a.output != RESIZER_OUTPUT_NONE)
> return -EBUSY;
> - resizer->resizer_a.output = RESIZER_OUPUT_MEMORY;
> + resizer->resizer_a.output = RESIZER_OUTPUT_MEMORY;
> break;
>
> default:
> @@ -1747,7 +1747,7 @@ static int resizer_link_setup(struct media_entity
> *entity, }
> if (resizer->resizer_b.output != RESIZER_OUTPUT_NONE)
> return -EBUSY;
> - resizer->resizer_b.output = RESIZER_OUPUT_MEMORY;
> + resizer->resizer_b.output = RESIZER_OUTPUT_MEMORY;
> break;
>
> default:
> diff --git a/drivers/staging/media/davinci_vpfe/dm365_resizer.h
> b/drivers/staging/media/davinci_vpfe/dm365_resizer.h index 93b0f44..00e64b0
> 100644
> --- a/drivers/staging/media/davinci_vpfe/dm365_resizer.h
> +++ b/drivers/staging/media/davinci_vpfe/dm365_resizer.h
> @@ -210,7 +210,7 @@ enum resizer_input_entity {
>
> enum resizer_output_entity {
> RESIZER_OUTPUT_NONE = 0,
> - RESIZER_OUPUT_MEMORY = 1,
> + RESIZER_OUTPUT_MEMORY = 1,
> };
>
> struct dm365_resizer_device {
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2016-11-22 19:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 2:26 [PATCH] drivers: staging: media: davinci_vpfe: dm365_resizer: fixed some spelling mistakes Saatvik Arya
2016-11-22 19:18 ` Laurent Pinchart [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-01-13 11:37 Saatvik Arya
2016-01-01 16:08 Saatvik Arya
2016-01-01 18:09 ` Trevor Woerner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5085070.7aCI71b85W@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=aryasaatvik@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.