From mboxrd@z Thu Jan 1 00:00:00 1970 From: Harald Judt Date: Mon, 22 Oct 2012 15:03:45 +0000 Subject: [lm-sensors] w83627ehf: Wrong values reported after resuming from suspend/hibernation Message-Id: <50856051.5070803@gmx.at> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi, After resuming from suspend or hibernation, the Vbat value is reported=20 to be 0.0. Before that, it reported the correct value. Min/max values=20 are wrong too. Linux-3.6.2, ASRock Z77 Extreme4 BIOS v1.80. Before suspend: nct6776-isa-0290 Adapter: ISA adapter Vcore: +0.97 V (min =3D +0.00 V, max =3D +1.74 V) in1: +1.84 V (min =3D +0.00 V, max =3D +0.00 V) ALARM AVCC: +3.34 V (min =3D +2.98 V, max =3D +3.63 V) +3.3V: +3.34 V (min =3D +2.98 V, max =3D +3.63 V) in4: +1.04 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in5: +1.68 V (min =3D +0.00 V, max =3D +0.00 V) ALARM 3VSB: +3.47 V (min =3D +2.98 V, max =3D +3.63 V) Vbat: +3.31 V (min =3D +2.70 V, max =3D +3.63 V) fan1: 0 RPM (min =3D 0 RPM) ALARM fan2: 1289 RPM (min =3D 0 RPM) ALARM fan3: 724 RPM (min =3D 0 RPM) ALARM fan4: 661 RPM (min =3D 0 RPM) ALARM fan5: 1076 RPM (min =3D 0 RPM) ALARM SYSTIN: +37.0=B0C (high =3D +0.0=B0C, hyst =3D +0.0=B0C) ALARM = sensor=20 =3D thermistor CPUTIN: +28.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D=20 thermistor AUXTIN: +33.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D=20 thermistor PECI Agent 0: +32.0=B0C cpu0_vid: +0.000 V intrusion0: ALARM intrusion1: ALARM After resuming: nct6776-isa-0290 Adapter: ISA adapter Vcore: +0.97 V (min =3D +0.00 V, max =3D +1.74 V) in1: +1.84 V (min =3D +0.00 V, max =3D +0.00 V) ALARM AVCC: +3.34 V (min =3D +0.00 V, max =3D +0.00 V) ALARM +3.3V: +3.34 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in4: +1.03 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in5: +1.68 V (min =3D +0.00 V, max =3D +0.00 V) ALARM 3VSB: +3.47 V (min =3D +0.00 V, max =3D +0.00 V) ALARM Vbat: +0.00 V (min =3D +0.00 V, max =3D +0.00 V) fan1: 0 RPM (min =3D 0 RPM) ALARM fan2: 1271 RPM (min =3D 0 RPM) ALARM fan3: 734 RPM (min =3D 0 RPM) ALARM fan4: 673 RPM (min =3D 0 RPM) ALARM fan5: 1093 RPM (min =3D 0 RPM) ALARM SYSTIN: +36.0=B0C (high =3D +0.0=B0C, hyst =3D +0.0=B0C) ALARM = sensor=20 =3D thermistor CPUTIN: +26.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D=20 thermistor AUXTIN: +33.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D=20 thermistor PECI Agent 0: +30.0=B0C cpu0_vid: +0.000 V intrusion0: ALARM intrusion1: ALARM Reloading the module helps. Of course, a fresh boot too ;-) Harald --=20 `Experience is the best teacher.' _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors