All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
To: meta-ti mailing list <meta-ti@yoctoproject.org>
Subject: BBB + uboot 2014.07 - not booting
Date: Tue, 19 Aug 2014 11:29:58 +0200	[thread overview]
Message-ID: <5087658.bcI9hl3Jbj@localhost.localdomain> (raw)

Hi all,

There seems to be a problem booting BBB from SD card with uboot 2014.07 from 
meta-ti, 2013.07 from yocto seems to work.
The card is partitioned as follows:

Device         Boot     Start       End Blocks  Id System
/dev/mmcblk0p1 *         2048     22527  10240   c W95 FAT32 (LBA)
/dev/mmcblk0p2          22528    227327 102400  83 Linux

I've already tried different cards.

This is all I get on the serial console:

U-Boot SPL 2014.07 (Aug 19 2014 - 10:45:01)
MMC: block number 0x100 exceeds max(0x0)
MMC: block number 0x200 exceeds max(0x0)
*** Error - No Valid Environment Area found
Using default environment

MMC: block number 0x1 exceeds max(0x0)
** Can't read partition table on 0:0 **
** Partition 1 not valid on device 0 **
spl_register_fat_device: fat register err - -1
### ERROR ### Please RESET the board ###

-- 

Maciej Borzęcki 
Senior Software Engineer Open-RnD Sp. z o.o. 
www.open-rnd.pl, Facebook, Twitter 
mobile: +48 telefon, fax: +48 42 657 9079 

Niniejsza wiadomość wraz z załącznikami może zawierać chronione prawem lub 
poufne informacje i została wysłana wyłącznie do wiadomości i użytku osób, do 
których została zaadresowana. Jeśli wiadomość została otrzymana przypadkowo 
zabrania się jej kopiowania lub rozsyłania do osób trzecich. W takim przypadku 
uprasza się o natychmiastowe zniszczenie wiadomości oraz poinformowanie 
nadawcy o zaistniałej sytuacji za pomocą wiadomości zwrotnej. Dziękujemy. 

This message, including any attachments hereto, may contain privileged or 
confidential information and is sent solely for the attention and use of the 
intended addressee(s). If you are not an intended addressee, you may neither 
use this message nor copy or deliver it to anyone. In such case, you should 
immediately destroy this message and kindly notify the sender by reply email. 
Thank you.


             reply	other threads:[~2014-08-19  9:30 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-19  9:29 Maciej Borzecki [this message]
2014-08-19 14:39 ` BBB + uboot 2014.07 - not booting Diego Sueiro
2014-08-19 20:00   ` Diego Sueiro
2014-08-19 20:40     ` Cooper Jr., Franklin
2014-09-01 21:10 ` Peter A. Bigot
2014-09-01 21:53   ` Diego Sueiro
2014-09-01 23:28     ` Peter A. Bigot
2014-09-01 23:54       ` Robert Nelson
2014-09-02  7:56       ` Maciej Borzecki
2014-09-02 11:42         ` Peter A. Bigot
2014-09-03  7:43           ` Maciej Borzecki
2014-09-02  3:08 ` Peter A. Bigot
2014-09-02  3:11   ` [ti-uboot][PATCH] mmc: restore capacity when switching to partition 0 Peter A. Bigot
2014-09-02 16:44     ` Tom Rini
2014-09-02 17:00       ` Peter A. Bigot
2014-09-02 22:01         ` Tom Rini
2014-09-02 22:41           ` Peter A. Bigot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5087658.bcI9hl3Jbj@localhost.localdomain \
    --to=maciej.borzecki@open-rnd.pl \
    --cc=meta-ti@yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.