All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] mx6qsabrelite: commands not recognized
Date: Thu, 25 Oct 2012 07:07:38 -0700	[thread overview]
Message-ID: <508947AA.8020100@boundarydevices.com> (raw)
In-Reply-To: <CAOMZO5AqLjD-8_+_UFRw8AOsYauo+ewpN=HnGCd5meY=XFzCVw@mail.gmail.com>

Hi Fabio,

On 10/25/2012 06:28 AM, Fabio Estevam wrote:
> Hi,
>
> Using the latest u-boot-imx tree, I am getting the following on a mx6qsabrelite:
>
> U-Boot 2012.10-09478-gab857f2 (Oct 25 2012 - 11:24:04)
>
> CPU:   Freescale i.MX6Q rev1.0 at 792 MHz
> Reset cause: POR
> Board: MX6Q-Sabre Lite
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> auto-detected panel HDMI
> enable_hdmi: setup HDMI monitor
> Display: HDMI (1024x768)
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC [PRIME]
> Warning: failed to set MAC address
>
> Hit any key to stop autoboot:  0
> MX6QSABRELITE U-Boot>  save
> Unknown command 'save' - try 'help'
> MX6QSABRELITE U-Boot>
>
> Basically no commands are recognized.
>
> Haven't started bisecting this yet, but just wanted to check if others
> see the same issue.
>

You might want to check how you're programming this.

I saw this issue when U-Boot first went above 256k (the SPI-NOR
upgrade script only erased 0x40000 bytes).

I'll test later today.

Regards,

Eric

  reply	other threads:[~2012-10-25 14:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-25 13:28 [U-Boot] mx6qsabrelite: commands not recognized Fabio Estevam
2012-10-25 14:07 ` Eric Nelson [this message]
2012-10-25 15:44   ` Eric Nelson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=508947AA.8020100@boundarydevices.com \
    --to=eric.nelson@boundarydevices.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.