[PATCH 2/5] ARM: PXA: Zipit Z2: Add USB host and device support

[zonque@gmail.com (Daniel Mack)]

On 29.10.2012 11:52, Vasily Khoruzhick wrote:
> On Mon, Oct 29, 2012 at 1:44 PM, Daniel Mack <zonque@gmail.com> wrote:
> 
>> I haven't seen any patches for DT bindings of this yet.
>>
>>> I still don't understand how DT handles platform-specific
>>> callbacks like set_power(). And what about pm_power_off hook?
>>
>> They require consideration.
>>
>> In general, a driver should be aware of everything that affects the
>> peripheral, including all the voltages and clocks it needs and also all
>> extra pins like for example reset GPIOs etc. And all that properties are
>> to be exported via DT as well (things that you would have normally set
>> up using pdata).
>>
>> If drivers lack that kind of full awareness of their environment, they
>> need to be augmented, because - to stick with the example of reset GPIOs
>> - the driver of all parts is the only piece that knows when to driver
>> that pin and how.
>>
>> About the hack to put the z2 to deep-sleep when it should actually power
>> down, I don't know what to do. But I would say that it's the userspace
>> that should be fixed here, if possible.
> 
> Well, there's an issue - Z2 does not preserve memory contents in deep sleep
> (but it does in sleep), so userspace can't be fixed here unfortunatelly.
> There's no another possibility to turn Z2 off, and plain sleep is too
> power hungry.
> So the only way to keep Z2 in low-power mode is fake power off, which just puts
> Z2 in deep sleep.

Why can't the userspace trigger a deep sleep then instead of powering
off? Which details do I lack?