[PATCH] ARM: mxs: apf28dev: Add I2C, SPI and spidev support

[maxime.ripard@free-electrons.com (Maxime Ripard)]

Le 06/11/2012 19:16, Gwenhael Goavec-Merou a ?crit :
> 
> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
> ---
>  arch/arm/boot/dts/imx28-apf28dev.dts |   19 +++++++++++++++++++
>  1 files changed, 19 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
> index 1643d25..da7013d 100644
> --- a/arch/arm/boot/dts/imx28-apf28dev.dts
> +++ b/arch/arm/boot/dts/imx28-apf28dev.dts
> @@ -27,6 +27,19 @@
>  				status = "okay";
>  			};
>  
> +			ssp2: ssp at 80014000 {
> +				compatible = "fsl,imx28-spi";
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&spi2_pins_a>;
> +				status = "okay";
> +
> +				spidev: spidev at 0 {
> +					compatible = "spidev";
> +					spi-max-frequency = <40000000>;
> +					reg = <0>;
> +				};
> +			};

This won't work, since the compatible string is not matching in the
spidev driver.

You need to add the compatible string of the spi device that you will
drive with spidev in the spidev driver, and then use this string in your
dts.

See
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-October/129134.html
and
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-October/129133.html


-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com