From: Stefan Koch <stefan.koch10@gmail.com>
To: linux-fbdev@vger.kernel.org
Subject: Re: i.MX 257 ARM-CPU: framebuffer error "division by zero"
Date: Wed, 07 Nov 2012 20:33:53 +0000 [thread overview]
Message-ID: <509AC5B1.5040301@gmail.com> (raw)
In-Reply-To: <509A6964.5090305@gmail.com>
The error snipped in first post is not from the beginning it's from the end.
This is from the beginning.
And there is named "imxfb", too.
For this error "video=imxfb:SVGA-16@60" is set in kernel command line:
The full messages are here: http://paste.debian.net/hidden/3d16ba27/
[<80246f78>] (register_framebuffer+0x17c/0x230) from [<80586ab8>]
(imxfb_probe+0x3c8/0x5a8)
[<80586ab8>] (imxfb_probe+0x3c8/0x5a8) from [<80286ba8>]
(platform_drv_probe+0x14/0x18)
[<80286ba8>] (platform_drv_probe+0x14/0x18) from [<802858b0>]
(driver_probe_device+0x80/0x20c)
[<802858b0>] (driver_probe_device+0x80/0x20c) from [<80285ac8>]
(__driver_attach+0x8c/0x90)
[<80285ac8>] (__driver_attach+0x8c/0x90) from [<80284230>]
(bus_for_each_dev+0x64/0x8c)
[<80284230>] (bus_for_each_dev+0x64/0x8c) from [<802849b0>]
(bus_add_driver+0xa4/0x230)
[<802849b0>] (bus_add_driver+0xa4/0x230) from [<80286098>]
(driver_register+0x78/0x140)
[<80286098>] (driver_register+0x78/0x140) from [<80286ef4>]
(platform_driver_probe+0x18/0x9c)
[<80286ef4>] (platform_driver_probe+0x18/0x9c) from [<805866d8>]
(imxfb_init+0x88/0xa0)
[<805866d8>] (imxfb_init+0x88/0xa0) from [<800087e4>]
(do_one_initcall+0x30/0x178)
[<800087e4>] (do_one_initcall+0x30/0x178) from [<80576310>]
(kernel_init+0xe4/0x1b0)
[<80576310>] (kernel_init+0xe4/0x1b0) from [<80015268>]
(kernel_thread_exit+0x0/0x8)
Division by zero in kernel.
[<80019ba4>] (unwind_backtrace+0x0/0xf4) from [<8022accc>] (Ldiv0+0x8/0x10)
[<8022accc>] (Ldiv0+0x8/0x10) from [<8022ac9c>] (__aeabi_uidivmod+0x8/0x18)
[<8022ac9c>] (__aeabi_uidivmod+0x8/0x18) from [<80254198>]
(cfb_imageblit+0x1fc/0x4b0)
[<80254198>] (cfb_imageblit+0x1fc/0x4b0) from [<80251964>]
(bit_putcs+0x2e4/0x420)
[<80251964>] (bit_putcs+0x2e4/0x420) from [<8024bde0>]
(fbcon_putcs+0xec/0x128)
[<8024bde0>] (fbcon_putcs+0xec/0x128) from [<802741f8>]
(do_update_region+0x108/0x18c)
[<802741f8>] (do_update_region+0x108/0x18c) from [<80275970>]
(update_region+0x70/0x88)
[<80275970>] (update_region+0x70/0x88) from [<8024dd08>]
(fbcon_switch+0x468/0x4bc)
[<8024dd08>] (fbcon_switch+0x468/0x4bc) from [<80276c84>]
(redraw_screen+0x15c/0x278)
[<80276c84>] (redraw_screen+0x15c/0x278) from [<80279e90>]
(take_over_console+0x2cc/0x37c)
[<80279e90>] (take_over_console+0x2cc/0x37c) from [<8024cacc>]
(fbcon_takeover+0x70/0xd4)
[<8024cacc>] (fbcon_takeover+0x70/0xd4) from [<8042541c>]
(notifier_call_chain+0x44/0x84)
[<8042541c>] (notifier_call_chain+0x44/0x84) from [<8004a2a0>]
(__blocking_notifier_call_chain+0x4c/0x64)
[<8004a2a0>] (__blocking_notifier_call_chain+0x4c/0x64) from
[<8004a2d0>] (blocking_notifier_call_chain+0x18/0x20)
[<8004a2d0>] (blocking_notifier_call_chain+0x18/0x20) from [<80246f78>]
(register_framebuffer+0x17c/0x230)
[<80246f78>] (register_framebuffer+0x17c/0x230) from [<80586ab8>]
(imxfb_probe+0x3c8/0x5a8)
[<80586ab8>] (imxfb_probe+0x3c8/0x5a8) from [<80286ba8>]
(platform_drv_probe+0x14/0x18)
[<80286ba8>] (platform_drv_probe+0x14/0x18) from [<802858b0>]
(driver_probe_device+0x80/0x20c)
[<802858b0>] (driver_probe_device+0x80/0x20c) from [<80285ac8>]
(__driver_attach+0x8c/0x90)
[<80285ac8>] (__driver_attach+0x8c/0x90) from [<80284230>]
(bus_for_each_dev+0x64/0x8c)
[<80284230>] (bus_for_each_dev+0x64/0x8c) from [<802849b0>]
(bus_add_driver+0xa4/0x230)
[<802849b0>] (bus_add_driver+0xa4/0x230) from [<80286098>]
(driver_register+0x78/0x140)
[<80286098>] (driver_register+0x78/0x140) from [<80286ef4>]
(platform_driver_probe+0x18/0x9c)
[<80286ef4>] (platform_driver_probe+0x18/0x9c) from [<805866d8>]
(imxfb_init+0x88/0xa0)
[<805866d8>] (imxfb_init+0x88/0xa0) from [<800087e4>]
(do_one_initcall+0x30/0x178)
[<800087e4>] (do_one_initcall+0x30/0x178) from [<80576310>]
(kernel_init+0xe4/0x1b0)
[<80576310>] (kernel_init+0xe4/0x1b0) from [<80015268>]
(kernel_thread_exit+0x0/0x8)
Without this setting the CPU does stop working (for JTAG debugger it has
the same effect as board is in power off state):
177772 bytes written at address 0x811ffc00
downloaded 177772 bytes in 19.548666s (8.881 KiB/s)
WARNING: unknown debug reason: 0xf
ThumbEE -- incomplete support
target state: halted
target halted in ThumbEE state due to debug-request, current mode: System
cpsr: 0xffffffff pc: 0xfffffff9
MMU: enabled, D-Cache: enabled, I-Cache: enabled
prev parent reply other threads:[~2012-11-07 20:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-07 14:00 i.MX 257 ARM-CPU: framebuffer error "division by zero" Stefan Koch
2012-11-07 14:23 ` Stefan Koch
2012-11-07 20:33 ` Stefan Koch [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=509AC5B1.5040301@gmail.com \
--to=stefan.koch10@gmail.com \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.