From: Jeff Kirsher <tarbal@gmail.com>
To: "pkill.2012" <pkill.2012@gmail.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
netdev <netdev@vger.kernel.org>, kvm <kvm@vger.kernel.org>,
e1000-devel@lists.sourceforge.net,
Greg Rose <gregory.v.rose@intel.com>
Subject: Re: SR-IOV problem with Intel 82599EB (not enough MMIO resources for SR-IOV)
Date: Thu, 08 Nov 2012 03:23:24 -0800 [thread overview]
Message-ID: <509B962C.6070002@gmail.com> (raw)
In-Reply-To: <201211081915083774239@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 21129 bytes --]
On 11/08/2012 03:15 AM, pkill.2012 wrote:
> Hello,
>
> I installed kvm and tried to use SR-IOV virtualizaton for 82599EB(Intel XT-520 T2) dual port card with latest ixgbe driver(version:3.11.33) ,
> kernel2.6.32-279.14.1(OS:Centos6.3) ,after configuration and reboot
> It seems that only first port of the card's VFs works,second port of the card's VFs didn't work
> I found some errors in /var/log messages:
>
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: not enough MMIO resources for SR-IOV
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: (unregistered net_device): Failed to enable PCI sriov: -12
>
> How to fix it,any help would be greatly appreciated.
>
> below is the related information:
> Server: R710
> OS: centos6.3
> NIC: X520-T2(dual port)
> kernel: 2.6.32-279.14.1.el6.x86_64
> BIOSVersion: 6.3.0(latest)
> BIOS:Inter VT/VT-d or SR-IOV(enabled)
> ixgbe:3.11.33(latest)
> ixgbevf:2.7.12(latest)
> grub config:intel_iommu=on appended
>
> /var/log/messages:
> Nov 8 14:56:54 12 kernel: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.11.33
> Nov 8 14:56:54 12 kernel: Copyright (c) 1999-2012 Intel Corporation.
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: PCI INT B -> GSI 50 (level, low) -> IRQ 50
> Nov 8 14:56:54 12 kernel: ixgbe: I/O Virtualization (IOV) set to 2
> Nov 8 14:56:54 12 kernel: ixgbe: 0000:07:00.0: ixgbe_check_options: FCoE Offload feature enabled
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: (unregistered net_device): SR-IOV enabled with 2 VFs
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: FCoE offload feature is not available. Disabling FCoE offload feature
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: (PCI Express:5.0GT/s:Width x8) 68:05:ca:0c:7a:e2
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: eth4: MAC: 2, PHY: 2, PBA No: G21371-003
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: eth4: Enabled Features: RxQ: 1 TxQ: 1 LRO
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: eth4: IOV: VF 0 is enabled mac 0E:15:B9:26:B3:7D
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: eth4: IOV: VF 1 is enabled mac 32:69:2D:16:B9:40
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.0: eth4: Intel(R) 10 Gigabit Network Connection
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
> Nov 8 14:56:54 12 kernel: ixgbe: I/O Virtualization (IOV) set to 2
> Nov 8 14:56:54 12 kernel: ixgbe: 0000:07:00.1: ixgbe_check_options: FCoE Offload feature enabled
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: not enough MMIO resources for SR-IOV
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: (unregistered net_device): Failed to enable PCI sriov: -12
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: FCoE offload feature is not available. Disabling FCoE offload feature
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: (PCI Express:5.0GT/s:Width x8) 68:05:ca:0c:7a:e3
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: eth5: MAC: 2, PHY: 2, PBA No: G21371-003
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: eth5: Enabled Features:
> RxQ: 16 TxQ: 16 FdirHash RSC
> Nov 8 14:56:54 12 kernel: ixgbe 0000:07:00.1: eth5: Intel(R) 10
> Gigabit Network Connection
>
> # dmesg |grep -E 'DMA|IOMMU'
> ACPI: DMAR 00000000bf3b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
> DMA 0x00000001 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> DMA zone: 56 pages used for memmap
> DMA zone: 102 pages reserved
> DMA zone: 3839 pages, LIFO batch:0
> DMA32 zone: 14280 pages used for memmap
> DMA32 zone: 764849 pages, LIFO batch:31
> Intel-IOMMU: enabled
> DMAR: Host address width 40
> DMAR: DRHD base: 0x000000fed90000 flags: 0x1
> IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f020fe
> DMAR: RMRR base: 0x000000bf4c8000 end: 0x000000bf4dffff
> DMAR: RMRR base: 0x000000bf4b1000 end: 0x000000bf4bffff
> DMAR: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff
> DMAR: RMRR base: 0x000000bf4a3000 end: 0x000000bf4a3fff
> DMAR: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff
> DMAR: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff
> DMAR: RMRR base: 0x000000bf4c0000 end: 0x000000bf4c0fff
> DMAR: RMRR base: 0x000000bf4c2000 end: 0x000000bf4c2fff
> DMAR: ATSR flags: 0x0
> DMAR: Device scope device [0000:00:1a.02] not found
> DMAR: Device scope device [0000:00:1a.02] not found
> DMAR: Device scope device [0000:00:1d.02] not found
> DMAR: Device scope device [0000:00:1d.02] not found
> IOMMU 0xfed90000: using Queued invalidation
> IOMMU: Setting RMRR:
> IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf4c2000 - 0xbf4c3000]
> IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf4c0000 - 0xbf4c1000]
> IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf4a7000 - 0xbf4a8000]
> IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf4a5000 - 0xbf4a6000]
> IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf4a3000 - 0xbf4a4000]
> IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf4a1000 - 0xbf4a2000]
> IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf4b1000 - 0xbf4c0000]
> IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf4b1000 - 0xbf4c0000]
> IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf4b1000 - 0xbf4c0000]
> IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf4b1000 - 0xbf4c0000]
> IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf4c8000 - 0xbf4e0000]
> IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf4c8000 - 0xbf4e0000]
> IOMMU: Prepare 0-16MiB unity mapping for LPC
> IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
> PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
> ata1: SATA max UDMA/133 cmd 0xdc10 ctl 0xdc08 bmdma 0xdc20 irq 23
> ata2: SATA max UDMA/133 cmd 0xdc18 ctl 0xdc0c bmdma 0xdc28 irq 23
> ata1.00: ATAPI: TSSTcorp DVD-ROM SN-108BB, D150, max UDMA/100
> ata1.00: configured for UDMA/100
>
> # lspci|grep Virtual
> 07:10.0 Ethernet controller: Intel Corporation 82599 Virtual Function (rev 01)
> 07:10.2 Ethernet controller: Intel Corporation 82599 Virtual Function (rev 01)
>
> #lspci|grep '82599EB'
> 07:00.0 Ethernet controller: Intel Corporation 82599EB 10 Gigabit TN
> Network Connection (rev 01)
> 07:00.1 Ethernet controller: Intel Corporation 82599EB 10 Gigabit TN
> Network Connection (rev 01)
>
> # lspci -n|grep 07:00
> 07:00.0 0200: 8086:151c (rev 01)
> 07:00.1 0200: 8086:151c (rev 01)
>
> # lspci -n -d 8086:151c -vvv|grep -i width
> LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>
> #lspci -vvv -s 07:00
> 07:00.0 Ethernet controller: Intel Corporation 82599EB 10 Gigabit TN Network Connection (rev 01)
> Subsystem: Intel Corporation Ethernet Server Adapter X520-T2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 50
> Region 0: Memory at de400000 (64-bit, non-prefetchable) [size=2M]
> Region 2: I/O ports at ecc0 [size=32]
> Region 4: Memory at de3f8000 (64-bit, non-prefetchable) [size=16K]
> Expansion ROM at de200000 [disabled] [size=1M]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [70] MSI-X: Enable+ Count=64 Masked-
> Vector table: BAR=4 offset=00000000
> PBA: BAR=4 offset=00002000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 256 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
> Capabilities: [e0] Vital Product Data
> Unknown small resource type 06, will not decode more.
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [140] Device Serial Number 68-05-ca-ff-ff-0c-7a-e2
> Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 1
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
> IOVSta: Migration-
> Initial VFs: 64, Total VFs: 64, Number of VFs: 2, Function Dependency Link: 00
> VF offset: 128, stride: 2, Device ID: 10ed
> Supported Page Size: 00000553, System Page Size: 00000001
> Region 0: Memory at 00000000d5900000 (64-bit, prefetchable)
> Region 3: Memory at 00000000d5a00000 (64-bit, prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Kernel driver in use: ixgbe
> Kernel modules: ixgbe
> 07:00.1 Ethernet controller: Intel Corporation 82599EB 10 Gigabit TN Network Connection (rev 01)
> Subsystem: Intel Corporation Ethernet Server Adapter X520-T2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 40
> Region 0: Memory at de600000 (64-bit, non-prefetchable) [size=2M]
> Region 2: I/O ports at ece0 [size=32]
> Region 4: Memory at de3fc000 (64-bit, non-prefetchable) [size=16K]
> Expansion ROM at d5800000 [disabled] [size=1M]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [70] MSI-X: Enable+ Count=64 Masked-
> Vector table: BAR=4 offset=00000000
> PBA: BAR=4 offset=00002000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 256 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
> Capabilities: [e0] Vital Product Data
> Unknown small resource type 06, will not decode more.
> Capabilities: [100] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [140] Device Serial Number 68-05-ca-ff-ff-0c-7a-e2
> Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 0
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
> IOVSta: Migration-
> Initial VFs: 64, Total VFs: 64, Number of VFs: 2, Function Dependency Link: 01
> VF offset: 128, stride: 2, Device ID: 10ed
> Supported Page Size: 00000553, System Page Size: 00000001
> Region 0: Memory at 00000000d5b00000 (64-bit, prefetchable)
> Region 3: Memory at 00000000d5b00000 (64-bit, prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Kernel driver in use: ixgbe
> Kernel modules: ixgbe
>
> #modinfo ixgbe
> filename: /lib/modules/2.6.32-279.14.1.el6.x86_64/kernel/drivers/net/ixgbe/ixgbe.ko
> version: 3.11.33
> license: GPL
> description: Intel(R) 10 Gigabit PCI Express Network Driver
> author: Intel Corporation, <linux.nics@intel.com>
> srcversion: ADDCBFA6FAFE8A0299074F8
> alias: pci:v00008086d0000154Asv*sd*bc*sc*i*
> alias: pci:v00008086d00001557sv*sd*bc*sc*i*
> alias: pci:v00008086d0000154Fsv*sd*bc*sc*i*
> alias: pci:v00008086d0000154Dsv*sd*bc*sc*i*
> alias: pci:v00008086d00001528sv*sd*bc*sc*i*
> alias: pci:v00008086d000010F8sv*sd*bc*sc*i*
> alias: pci:v00008086d0000151Csv*sd*bc*sc*i*
> alias: pci:v00008086d00001529sv*sd*bc*sc*i*
> alias: pci:v00008086d0000152Asv*sd*bc*sc*i*
> alias: pci:v00008086d000010F9sv*sd*bc*sc*i*
> alias: pci:v00008086d00001514sv*sd*bc*sc*i*
> alias: pci:v00008086d00001507sv*sd*bc*sc*i*
> alias: pci:v00008086d000010FBsv*sd*bc*sc*i*
> alias: pci:v00008086d00001517sv*sd*bc*sc*i*
> alias: pci:v00008086d000010FCsv*sd*bc*sc*i*
> alias: pci:v00008086d000010F7sv*sd*bc*sc*i*
> alias: pci:v00008086d00001508sv*sd*bc*sc*i*
> alias: pci:v00008086d000010DBsv*sd*bc*sc*i*
> alias: pci:v00008086d000010F4sv*sd*bc*sc*i*
> alias: pci:v00008086d000010E1sv*sd*bc*sc*i*
> alias: pci:v00008086d000010F1sv*sd*bc*sc*i*
> alias: pci:v00008086d000010ECsv*sd*bc*sc*i*
> alias: pci:v00008086d000010DDsv*sd*bc*sc*i*
> alias: pci:v00008086d0000150Bsv*sd*bc*sc*i*
> alias: pci:v00008086d000010C8sv*sd*bc*sc*i*
> alias: pci:v00008086d000010C7sv*sd*bc*sc*i*
> alias: pci:v00008086d000010C6sv*sd*bc*sc*i*
> alias: pci:v00008086d000010B6sv*sd*bc*sc*i*
> depends: dca
> vermagic: 2.6.32-279.14.1.el6.x86_64 SMP mod_unload modversions
> parm: InterruptType:Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default IntMode (deprecated) (array of int)
> parm: IntMode:Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2 (array of int)
> parm: MQ:Disable or enable Multiple Queues, default 1 (array of int)
> parm: DCA:Disable or enable Direct Cache Access, 0=disabled, 1=descriptor only, 2=descriptor and data (array of int)
> parm: RSS:Number of Receive-Side Scaling Descriptor Queues, default 0=number of cpus (array of int)
> parm: VMDQ:Number of Virtual Machine Device Queues: 0/1 = disable, 2-16 enable (default=8) (array of int)
> parm: max_vfs:Number of Virtual Functions: 0 = disable (default), 1-63 = enable this many VFs (array of int)
> parm: L2LBen:L2 Loopback Enable: 0 = disable, 1 = enable (default) (array of int)
> parm: InterruptThrottleRate:Maximum interrupts per second, per vector, (0,1,956-488281), default 1 (array of int)
> parm: LLIPort:Low Latency Interrupt TCP Port (0-65535) (array of int)
> parm: LLIPush:Low Latency Interrupt on TCP Push flag (0,1) (array of int)
> parm: LLISize:Low Latency Interrupt on Packet Size (0-1500) (array of int)
> parm: LLIEType:Low Latency Interrupt Ethernet Protocol Type (array of int)
> parm: LLIVLANP:Low Latency Interrupt on VLAN priority threshold (array of int)
> parm: FdirPballoc:Flow Director packet buffer allocation level:
> 1 = 8k hash filters or 2k perfect filters
> 2 = 16k hash filters or 4k perfect filters
> 3 = 32k hash filters or 8k perfect filters (array of int)
> parm: AtrSampleRate:Software ATR Tx packet sample rate (array of int)
> parm: FCoE:Disable or enable FCoE Offload, default 1 (array of int)
> parm: LRO:Large Receive Offload (0,1), default 1 = on (array of int)
> parm: allow_unsupported_sfp:Allow unsupported and untested SFP+ modules on 82599 based adapters, default 0 = Disable (array of int)
>
> # modinfo ixgbevf
> filename: /lib/modules/2.6.32-279.14.1.el6.x86_64/kernel/drivers/net/ixgbevf/ixgbevf.ko
> version: 2.7.12
> license: GPL
> description: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
> author: Intel Corporation, <linux.nics@intel.com>
> srcversion: 4D00B4A5B811D6D07D8BD15
> alias: pci:v00008086d00001515sv*sd*bc*sc*i*
> alias: pci:v00008086d000010EDsv*sd*bc*sc*i*
> depends:
> vermagic: 2.6.32-279.14.1.el6.x86_64 SMP mod_unload modversions
> parm: InterruptThrottleRate:Maximum interrupts per second, per vector, (956-488281), default 8000, use 1 for dynamic (array of int)
>
>
> # dmidecode -t bios
> # dmidecode 2.11
> SMBIOS 2.6 present.
> Handle 0x0000, DMI type 0, 24 bytes
> BIOS Information
> Vendor: Dell Inc.
> Version: 6.3.0
> Release Date: 07/24/2012
> Address: 0xF0000
> Runtime Size: 64 kB
> ROM Size: 4096 kB
> Characteristics:
> ISA is supported
> PCI is supported
> PNP is supported
> BIOS is upgradeable
> BIOS shadowing is allowed
> Boot from CD is supported
> Selectable boot is supported
> EDD is supported
> Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
> 5.25"/360 kB floppy services are supported (int 13h)
> 5.25"/1.2 MB floppy services are supported (int 13h)
> 3.5"/720 kB floppy services are supported (int 13h)
> 8042 keyboard services are supported (int 9h)
> Serial services are supported (int 14h)
> CGA/mono video services are supported (int 10h)
> ACPI is supported
> USB legacy is supported
> BIOS boot specification is supported
> Function key-initiated network boot is supported
> Targeted content distribution is supported
> BIOS Revision: 6.3
> Handle 0x0D00, DMI type 13, 22 bytes
> BIOS Language Information
> Language Description Format: Long
> Installable Languages: 1
> en|US|iso8859-1
> Currently Installed Language: en|US|iso8859-1
>
> Jason Gao
> --
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Adding e100-devel mailing list
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 897 bytes --]
next prev parent reply other threads:[~2012-11-08 11:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-08 11:15 SR-IOV problem with Intel 82599EB (not enough MMIO resources for SR-IOV) pkill.2012
2012-11-08 11:23 ` Jeff Kirsher [this message]
2012-11-08 16:53 ` Rose, Gregory V
2012-11-09 3:59 ` Jason Gao
2012-11-09 15:26 ` Bjorn Helgaas
2012-11-09 16:56 ` Yinghai Lu
2012-11-09 16:56 ` Yinghai Lu
2012-11-12 19:46 ` Don Dutile
2012-11-13 13:38 ` Jason Gao
2012-11-13 16:04 ` Li, Sibai
2012-11-13 16:40 ` Don Dutile
2012-11-13 18:16 ` Yinghai Lu
2012-11-13 18:25 ` Li, Sibai
2012-11-13 18:25 ` Li, Sibai
2012-11-13 18:29 ` Yinghai Lu
2012-11-09 17:15 ` Rose, Gregory V
2012-11-09 18:08 ` Li, Sibai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=509B962C.6070002@gmail.com \
--to=tarbal@gmail.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=gregory.v.rose@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pkill.2012@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.