[ath9k-devel] Fwd: FW: Channel busy cycles

[Ali Abedi <a2abedi@uwaterloo.ca>]

Thank you. The plot I posted before shows dependency between 
transmission rate and difference between busy and rx+tx counters. Can 
you please explain more how this diagram address this observation.

Best,
Ali

On 11/9/2012 4:34 PM, Adrian Chadd wrote:
>
> Hi,
>
> For those interested in the TX/RX counter discrepancy that's been 
> pointed out here, here's a diagram which someone did up to explain the 
> distinction to me. He's ok with me publishing this; the timing values 
> are for demonstration purposes and shouldn't be taken as gospel.
>
> Thanks,
>
>
> Adrian
>
> Rx_clear count is almost accurate.  Rx_frame count is not the air time 
> but the time that the PHY takes to process a receive frame.  Tx_frame 
> count is the time to transfer TX data from the MAC to the PHY.
>
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20121111/98588474/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 12475 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20121111/98588474/attachment.png