From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Mon, 12 Nov 2012 09:15:18 +0100 Subject: [Buildroot] buildroot-2012.08: Handling drm module In-Reply-To: <785D21F16C354A27B5E83E9F56FEA59B@ZviVeredPC> References: <50A029E0.4020802@mind.be> <785D21F16C354A27B5E83E9F56FEA59B@ZviVeredPC> Message-ID: <50A0B016.4030402@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 11/12/12 04:58, Zvi Vered wrote: > Hello, > > Build is OK. > The resulting image boots OK. > But the screen flickers with this image. > The image was not built with buildroot. So, why are you asking this on the buildroot mailing list then? > I built vanilla 3.4.7 downloaded from kernel.org > > With knoppix 7.0.4, when I boot with: "knoppix 2" there is no flickering. > When I boot with "knoppix 2 nodrm" the screen flickers. > > Is "nodrm" a boot parameter (like vga=normal) ? I have no idea - perhaps a question to ask on the knoppix mailing list? Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F