[PATCH] mmc: sdhci: check the quirk HISPD_BIT for SD3.0 card

[Jaehoon Chung <jh80.chung@samsung.com>]

If SD-card is more than SD3.0 card, set to ctrl with UHS-I modes.
But in case of Samsung-SoC, didn't use the SDHCI_CTRL_HISPD.
So need to check the quirk for SDHCI_QUIRK_NO_HISPD_BIT.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/mmc/host/sdhci.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6f6534e..b42d551 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1418,11 +1418,12 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		unsigned int clock;
 
 		/* In case of UHS-I modes, set High Speed Enable */
-		if ((ios->timing == MMC_TIMING_MMC_HS200) ||
+		if (((ios->timing == MMC_TIMING_MMC_HS200) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR50) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR104) ||
 		    (ios->timing == MMC_TIMING_UHS_DDR50) ||
-		    (ios->timing == MMC_TIMING_UHS_SDR25))
+		    (ios->timing == MMC_TIMING_UHS_SDR25)) &&
+		    !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
 			ctrl |= SDHCI_CTRL_HISPD;
 
 		ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-- 
1.7.4.1