On 2012-11-21 05:38, Otavio Salvador wrote: > On Wed, Nov 21, 2012 at 10:34 AM, Gary Thomas wrote: >> On 2012-11-21 05:21, Otavio Salvador wrote: >>> >>> On Wed, Nov 21, 2012 at 10:01 AM, Gary Thomas >>> wrote: >>> ... >>>> >>>> That helped, but then it dies: >>>> [579761.853] (II) VIVANTE(0): FB Start = 0x2b0f9000 FB Base = 0x2b0f9000 >>>> FB Offset = (nil) >>>> [579761.865] (II) VIVANTE(0): test Initializing EXA >>>> [579761.865] >>>> Backtrace: >>>> [579761.865] Segmentation fault at address 0xc >>>> [579761.865] >>>> Fatal server error: >>>> [579761.865] Caught signal 11 (Segmentation fault). Server aborting >>>> [579761.865] >>> >>> >>> Good; now we need to fix this. >>> >>> I will take a look on this and I let you know if any news. >>> >> >> Here's a GDB backtrace: >> >> Program received signal SIGSEGV, Segmentation fault. >> 0x2b078fac in gcoOS_GetBaseAddress () from /usr/lib/libGAL.so >> (gdb) bt >> #0 0x2b078fac in gcoOS_GetBaseAddress () from /usr/lib/libGAL.so >> #1 0x2afeca78 in gcoHAL_MapUserMemory () from /usr/lib/libGAL.so >> #2 0x2ab341c0 in ?? () from /usr/lib/xorg/modules/drivers/vivante_drv.so >> #3 0x2ab341c0 in ?? () from /usr/lib/xorg/modules/drivers/vivante_drv.so >> Backtrace stopped: previous frame identical to this frame (corrupt stack?) >> >> Maybe I'm missing some piece, e.g. loading the video acceleration firmware? >> n.b. I don't know much about this platform, so I'm a bit in the dark. > > It seems to be all done; I am pondering if it might be a problem with > our U-Boot; you might try to use Freescale U-Boot and give it a try. I'm using the U-Boot that came with the board. Should I try the one just built? If so, how (is there a temporary way to try it)?