From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Michael Pellegrini <mikep86@gmail.com>
Cc: linux-can@vger.kernel.org
Subject: Re: pch_can: Data transmission stops after dropped packet
Date: Wed, 21 Nov 2012 16:32:33 +0100 [thread overview]
Message-ID: <50ACF411.1050201@pengutronix.de> (raw)
In-Reply-To: <loom.20121121T162041-774@post.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1862 bytes --]
On 11/21/2012 04:25 PM, Michael Pellegrini wrote:
> Michael Pellegrini <mikep86 <at> gmail.com> writes:
>
>> This driver is working very well so far. ifconfig shows that I am sending and
>> receiving CAN messages successfully. This is confirmed externally by the CAN
>> Monitor system.
>>
>> I will start a more intensive test now and report the results.
>
> I shouldn't have spoken so soon. Running my application on the PCH-System
> caused the original problem within minutes. Message transmission stopped
> and and my application started printing the error "No buffer space available".
> The only way to recover was to reset the interface.
Can you try this patch (ontop of Wolfgang's)?
Marc
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 5233b8f..2849224 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -543,8 +543,6 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
msg_obj_no = get_tx_next_msg_obj(priv);
- /* prepare message object for transmission */
- c_can_write_msg_object(dev, 0, frame, msg_obj_no);
can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
/*
@@ -556,6 +554,9 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
(priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) == 0)
netif_stop_queue(dev);
+ /* prepare message object for transmission */
+ c_can_write_msg_object(dev, 0, frame, msg_obj_no);
+
return NETDEV_TX_OK;
}
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 261 bytes --]
next prev parent reply other threads:[~2012-11-21 15:32 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-14 15:39 pch_can: Data transmission stops after dropped packet Michael Pellegrini
2012-11-14 21:40 ` Michael Pellegrini
2012-11-15 7:18 ` Oliver Hartkopp
2012-11-15 13:13 ` Wolfgang Grandegger
2012-11-15 16:23 ` Michael Pellegrini
2012-11-15 21:19 ` Wolfgang Grandegger
2012-11-15 21:34 ` Michael Pellegrini
2012-11-15 21:51 ` Wolfgang Grandegger
2012-11-18 22:22 ` Wolfgang Grandegger
2012-11-19 15:10 ` Michael Pellegrini
2012-11-19 15:26 ` Wolfgang Grandegger
2012-11-19 16:20 ` Michael Pellegrini
2012-11-19 16:31 ` Wolfgang Grandegger
2012-11-19 17:39 ` Michael Pellegrini
2012-11-19 19:22 ` Wolfgang Grandegger
2012-11-19 20:19 ` Michael Pellegrini
2012-11-19 21:46 ` Wolfgang Grandegger
2012-11-20 14:25 ` Michael Pellegrini
2012-11-20 16:12 ` Wolfgang Grandegger
2012-11-20 19:12 ` Michael Pellegrini
2012-11-20 21:05 ` Wolfgang Grandegger
2012-11-21 10:24 ` Wolfgang Grandegger
[not found] ` <loom.20121121T160744-278@post.gmane.or g>
2012-11-21 15:15 ` Michael Pellegrini
[not found] ` <loom.20121121T160744-278@post.gmane.or g>
2012-11-21 15:25 ` Michael Pellegrini
2012-11-21 15:32 ` Marc Kleine-Budde [this message]
2012-11-21 16:11 ` Michael Pellegrini
2012-11-21 15:41 ` Michael Pellegrini
2012-11-21 15:56 ` Wolfgang Grandegger
2012-11-21 16:09 ` Michael Pellegrini
2012-11-21 16:41 ` Wolfgang Grandegger
2012-11-21 16:58 ` Casper Mogensen
2012-11-21 19:48 ` Wolfgang Grandegger
2012-11-21 17:43 ` Michael Pellegrini
2012-11-21 19:55 ` Wolfgang Grandegger
2012-11-21 21:00 ` Michael Pellegrini
2012-11-23 14:27 ` Michael Pellegrini
2012-11-23 14:45 ` Wolfgang Grandegger
2012-11-23 14:47 ` Wolfgang Grandegger
2012-11-23 15:14 ` Michael Pellegrini
2012-11-23 15:04 ` Michael Pellegrini
2012-11-23 17:00 ` Wolfgang Grandegger
2012-11-23 17:18 ` Wolfgang Grandegger
2012-11-23 17:52 ` Michael Pellegrini
2012-11-25 16:17 ` Wolfgang Grandegger
2012-11-26 14:54 ` Michael Pellegrini
2012-11-26 15:30 ` Wolfgang Grandegger
2012-11-26 17:30 ` Michael Pellegrini
2012-11-26 18:13 ` Wolfgang Grandegger
2012-11-29 12:15 ` Wolfgang Grandegger
2012-11-29 14:15 ` Michael Pellegrini
2012-12-06 14:20 ` Michael Pellegrini
2012-12-06 14:23 ` Marc Kleine-Budde
2012-12-06 14:41 ` Wolfgang Grandegger
2012-12-06 14:42 ` Marc Kleine-Budde
2012-12-06 14:42 ` Michael Pellegrini
2012-12-06 14:49 ` Wolfgang Grandegger
2012-12-06 17:05 ` Alexander Stein
2012-12-06 22:02 ` Wolfgang Grandegger
2012-12-06 23:24 ` Marc Kleine-Budde
2012-12-10 8:21 ` Alexander Stein
2012-12-11 20:24 ` Wolfgang Grandegger
2012-12-13 14:04 ` Alexander Stein
2012-12-11 14:46 ` Michael Pellegrini
2012-12-11 20:21 ` Wolfgang Grandegger
2012-12-12 13:35 ` Alexander Stein
2012-12-06 22:11 ` Michael Pellegrini
2012-12-06 23:23 ` Michael Pellegrini
2012-11-24 7:16 ` Wolfgang Grandegger
2012-11-26 3:33 ` Bhupesh SHARMA
2012-11-21 14:52 ` Michael Pellegrini
2012-11-21 15:02 ` Wolfgang Grandegger
2012-11-15 16:32 ` Casper Mogensen
2012-11-15 21:16 ` Wolfgang Grandegger
2012-11-16 19:39 ` Wolfgang Grandegger
2012-11-15 16:12 ` Michael Pellegrini
2012-11-20 18:59 ` Wolfgang Grandegger
2012-11-15 12:35 ` Steffen Rose
2012-11-15 18:26 ` Michael Pellegrini
2012-11-16 8:24 ` Steffen Rose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50ACF411.1050201@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=mikep86@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.