From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Exynos: clock: support get_mmc_clk for exynos
Date: Thu, 22 Nov 2012 13:22:38 +0900 [thread overview]
Message-ID: <50ADA88E.9020508@samsung.com> (raw)
To get exactly clock value for mmc, support the get_mmc_clk() like
set_mmc_clk().
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/cpu/armv7/exynos/clock.c | 107 ++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-exynos/clk.h | 1 +
2 files changed, 108 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index fe61f88..731bbff 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -373,6 +373,100 @@ static unsigned long exynos5_get_uart_clk(int dev_index)
return uclk;
}
+static unsigned long exynos4_get_mmc_clk(int dev_index)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+ unsigned long uclk, sclk;
+ unsigned int sel, ratio, pre_ratio;
+ int shift;
+
+ sel = readl(&clk->src_fsys);
+ sel = (sel >> (dev_index << 2)) & 0xf;
+
+ if (sel == 0x6)
+ sclk = get_pll_clk(MPLL);
+ else if (sel == 0x7)
+ sclk = get_pll_clk(EPLL);
+ else if (sel == 0x8)
+ sclk = get_pll_clk(VPLL);
+ else
+ return 0;
+
+ switch (dev_index) {
+ case 0:
+ case 1:
+ ratio = readl(&clk->div_fsys1);
+ pre_ratio = readl(&clk->div_fsys1);
+ break;
+ case 2:
+ case 3:
+ ratio = readl(&clk->div_fsys2);
+ pre_ratio = readl(&clk->div_fsys2);
+ break;
+ case 4:
+ ratio = readl(&clk->div_fsys3);
+ pre_ratio = readl(&clk->div_fsys3);
+ break;
+ default:
+ return 0;
+ }
+
+ if (dev_index == 1 || dev_index == 3)
+ shift = 16;
+
+ ratio = (ratio >> shift) & 0xf;
+ pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
+ uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
+
+ return uclk;
+}
+
+static unsigned long exynos5_get_mmc_clk(int dev_index)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned long uclk, sclk;
+ unsigned int sel, ratio, pre_ratio;
+ int shift;
+
+ sel = readl(&clk->src_fsys);
+ sel = (sel >> (dev_index << 2)) & 0xf;
+
+ if (sel == 0x6)
+ sclk = get_pll_clk(MPLL);
+ else if (sel == 0x7)
+ sclk = get_pll_clk(EPLL);
+ else if (sel == 0x8)
+ sclk = get_pll_clk(VPLL);
+ else
+ return 0;
+
+ switch (dev_index) {
+ case 0:
+ case 1:
+ ratio = readl(&clk->div_fsys1);
+ pre_ratio = readl(&clk->div_fsys1);
+ break;
+ case 2:
+ case 3:
+ ratio = readl(&clk->div_fsys2);
+ pre_ratio = readl(&clk->div_fsys2);
+ break;
+ default:
+ return 0;
+ }
+
+ if (dev_index == 1 || dev_index == 3)
+ shift = 16;
+
+ ratio = (ratio >> shift) & 0xf;
+ pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
+ uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
+
+ return uclk;
+}
+
/* exynos4: set the mmc clock */
static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
@@ -386,9 +480,14 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
* MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
* CLK_DIV_FSYS2
* MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
+ * CLK_DIV_FSYS3
+ * MMC4_PRE_RATIO [15:8]
*/
if (dev_index < 2) {
addr = (unsigned int)&clk->div_fsys1;
+ } else if (dev_index == 4) {
+ addr = (unsigned int)&clk->div_fsys3;
+ dev_index -= 4;
} else {
addr = (unsigned int)&clk->div_fsys2;
dev_index -= 2;
@@ -963,6 +1062,14 @@ unsigned long get_uart_clk(int dev_index)
return exynos4_get_uart_clk(dev_index);
}
+unsigned long get_mmc_clk(int dev_index)
+{
+ if (cpu_is_exynos5())
+ return exynos5_get_mmc_clk(dev_index);
+ else
+ return exynos4_get_mmc_clk(dev_index);
+}
+
void set_mmc_clk(int dev_index, unsigned int div)
{
if (cpu_is_exynos5())
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index cd12323..ff155d8 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -34,6 +34,7 @@ unsigned long get_arm_clk(void);
unsigned long get_i2c_clk(void);
unsigned long get_pwm_clk(void);
unsigned long get_uart_clk(int dev_index);
+unsigned long get_mmc_clk(int deV_index);
void set_mmc_clk(int dev_index, unsigned int div);
unsigned long get_lcd_clk(void);
void set_lcd_clk(void);
--
1.7.4.1
next reply other threads:[~2012-11-22 4:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 4:22 Jaehoon Chung [this message]
2012-12-07 5:34 ` [U-Boot] [PATCH] Exynos: clock: support get_mmc_clk for exynos Minkyu Kang
2012-12-14 9:22 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50ADA88E.9020508@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.