All of lore.kernel.org
 help / color / mirror / Atom feed
From: oeai <oeai@ya.ru>
To: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Subject: Re oe to ta about latest drivers and so on: EMU-1212m "no Audiodock - no firmware" patch
Date: Sat, 24 Nov 2012 00:13:09 +0400	[thread overview]
Message-ID: <50AFD8D5.50909@ya.ru> (raw)
In-Reply-To: <s5hy5hsk1gf.wl%tiwai@suse.de>

On 23.11.2012 15:23, Takashi Iwai wrote:
> At Fri, 23 Nov 2012 00:09:37 +0400,
> oeai wrote:
>>
> At best, check sound git tree for-next branch.
>
>    git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git

o k i ll try to diff it with my fix and original just in some later time 
- i'm writing music now, srry i want to create more sounds in few days, 
i've already spent 2 days on programming and debugging alot
and btw hows it works? what to do with git? i got own git in netbeans 
but still don't know how to use it more easy (maybe i'll it later)
ok
git clone - just right now, so i'll check it
do i need to get from latest snapshot?
>
> Does the firmware load happen all the time soon after loading the
> driver, or in certain situations?
- yep it was always when i was gettin out of suspend or reboot, with my 
fix it is not happening anymore but you need to ask some1 with audiodock 
to check if "!" is working
> Emu APS code is very much irrelevant with your card.  So, don't add
> it.
found it, ok i'll try to rem it and see what happens, but for me it is 
working right now when it is enabled and as i seen it it notebook i 
thought that it is similar to mine (there was a pcmcia version with 
audiodock-m so i think 1212 is a next gen of ecard)
>
>>> What are other essentially required changes?
>> well i've changed emufx and other file because they were loading some
>> libs and sliders that are not really needed by the emu_model
> OK, but this is a clean up instead of a fix.
> Let's postpone it.  Once after the device gets work stably, we can
> look back.
no it's not a clean up, i've really fixed the code check the .patch diff 
for other files i've set if (not emu_model){exec ac97 and spk71}
> The PCI SSID is set by the card itself, so this must be really a
> conflict with another existing card (emu1010b).  That's bad.
>
> The primary question is whether ca_cardbus_chip = 1 is mandatory.
> What happens if you don't set it?
well i'm not really sure, i don't like to reboot system everyweek, my 
last uptime was 23 days but because of the driver - it's changed and i 
had freezes few times when trying to wakeup the system and exec load 
firmware some other ways.

actually i need to know what is the ca_cardbus is ? and then see the 
code to check when it is loading and which registers needs to be checked.

>
> Did you subscribe to ML?  It's a moderated list, so you have to
> subscribe at first.
>
> Also, alsa-driver 1.0.25 is pretty old.
> Try the latest snapshot tarball instead
>    ftp://ftp.suse.com/pub/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>
>
> thanks,
>
> Takashi
yes, i'm subscribed and i was looking for latest drivers few times but 
the problem is that i'm banned as a tor-exit-node, so i've disabled tor, 
but still cannot access few sites - i cannot go to https://alsa.ftp  for 
example, so i've take some that i could, looks like i'll have to check 
all changes again?

================
goingto man diff then crazy


-- 
RA
OE
AI

  reply	other threads:[~2012-11-23 20:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-21 22:18 EMU-1212m "no Audiodock - no firmware" patch oeai
2012-11-22 17:17 ` Takashi Iwai
2012-11-22 20:09   ` oeai
2012-11-23 11:23     ` Takashi Iwai
2012-11-23 20:13       ` oeai [this message]
2012-11-25 19:05       ` James Courtier-Dutton
2012-11-25 20:09         ` oeai
2012-12-29  2:45   ` oeai
2012-12-29  2:52   ` oeai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50AFD8D5.50909@ya.ru \
    --to=oeai@ya.ru \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.