From mboxrd@z Thu Jan 1 00:00:00 1970 From: oeai Subject: Re: EMU-1212m "no Audiodock - no firmware" patch Date: Mon, 26 Nov 2012 00:09:30 +0400 Message-ID: <50B27AFA.8000208@ya.ru> References: <50AD5347.5040003@ya.ru> <50AE8681.3080409@ya.ru> Reply-To: oeai@ya.ru Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from forward9.mail.yandex.net (forward9.mail.yandex.net [77.88.61.48]) by alsa0.perex.cz (Postfix) with ESMTP id BE6D8260317 for ; Sun, 25 Nov 2012 21:09:56 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: James Courtier-Dutton Cc: Takashi Iwai , alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Oh, it's nice really!! Did i understand you correctly - that the ca_cardbus - is the pcmcia bus support? So i need just to turn it off and that will solve the problem of waking up from suspend? nor should i put it in the end of the init process (so that sequence would be loaded before it)? just didn't understand what do you mean @new card@ because it is actually stopped being supported and now they do the pcie and usb cards only. =) On 25.11.2012 23:05, James Courtier-Dutton wrote: > Can I help at all? > I don't have much time spare, but I do have datasheets for some EMU cards. > The PCMCIA/Cardbus versions need a special startup sequence before you > can write or read any other registers. > Failing to follow the startup sequence causes a PCI fault on the bus > when you write to other registers on the card. > I have not read the code recently, but I think that is what > "ca_cardbus_chip = 1". > For any new cards, you can try removing it, and if you get a PCI fault > or hang on start up, put it back in. > -- RA OE AI