From: Saravana <saravanad@posedge.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Subject: RFC[4/4] mac80211: add statistic to debugfs
Date: Mon, 26 Nov 2012 10:50:03 +0530 [thread overview]
Message-ID: <50B2FC03.4050101@posedge.com> (raw)
Provide additional statistic support to the debugfs.
Last Rx Rate:
Currently there is no stats available in the debugfs for rx rate. This
statistics adds the rate of the last received packet from the station.
Signed-off-by: Saravana <saravanad@posedge.com>
---
The diff file is generated from wireless-testing git tree.
net/mac80211/cfg.c | 21 +++++++++++++--------
net/mac80211/debugfs_sta.c | 15 +++++++++++++++
net/mac80211/sta_info.h | 2 ++
3 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 6733b374..e45511a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -396,6 +396,18 @@ void sta_set_rate_info_tx(struct sta_info *sta,
rate_idx_to_bitrate(rinfo, sta, rate->idx);
}
+void sta_set_rate_info_rx(struct sta_info *sta,struct rate_info *rinfo)
+{
+ rinfo->flags = 0;
+ if (sta->last_rx_rate_flag & RX_FLAG_HT)
+ rinfo->flags |= RATE_INFO_FLAGS_MCS;
+ if (sta->last_rx_rate_flag & RX_FLAG_40MHZ)
+ rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+ if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI)
+ rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
+ rate_idx_to_bitrate(rinfo, sta, sta->last_rx_rate_idx);
+
+}
static void sta_set_sinfo(struct sta_info *sta, struct station_info
*sinfo)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
@@ -443,14 +455,7 @@ static void sta_set_sinfo(struct sta_info *sta,
struct station_info *sinfo)
sta_set_rate_info_tx(sta, &sta->last_tx_rate, &sinfo->txrate);
- sinfo->rxrate.flags = 0;
- if (sta->last_rx_rate_flag & RX_FLAG_HT)
- sinfo->rxrate.flags |= RATE_INFO_FLAGS_MCS;
- if (sta->last_rx_rate_flag & RX_FLAG_40MHZ)
- sinfo->rxrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
- if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI)
- sinfo->rxrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
- rate_idx_to_bitrate(&sinfo->rxrate, sta, sta->last_rx_rate_idx);
+ sta_set_rate_info_rx(sta,&sinfo->rxrate);
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
old mode 100644
new mode 100755
index 89281d2..16e738e
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -321,6 +321,20 @@ static ssize_t sta_ht_capa_read(struct file *file,
char __user *userbuf,
}
STA_OPS(ht_capa);
+static ssize_t sta_last_rx_rate_read(struct file *file, char __user
*userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct sta_info *sta = file->private_data;
+ struct rate_info rinfo;
+ u16 rate;
+
+ sta_set_rate_info_rx(sta,&rinfo);
+
+ rate = cfg80211_calculate_bitrate(&rinfo);
+
+ return mac80211_format_buffer(userbuf, count, ppos, "%d.%d
MBit/s\n",rate/10,rate%10);
+}
+STA_OPS(last_rx_rate);
#define DEBUGFS_ADD(name) \
debugfs_create_file(#name, 0400, \
sta->debugfs.dir, sta, &sta_ ##name## _ops);
@@ -369,6 +383,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
DEBUGFS_ADD(dev);
DEBUGFS_ADD(last_signal);
DEBUGFS_ADD(ht_capa);
+ DEBUGFS_ADD(last_rx_rate);
DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 776f3d0..122d853 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -550,6 +550,8 @@ int sta_info_flush(struct ieee80211_local *local,
void sta_set_rate_info_tx(struct sta_info *sta,
const struct ieee80211_tx_rate *rate,
struct rate_info *rinfo);
+void sta_set_rate_info_rx(struct sta_info *sta,
+ struct rate_info *rinfo);
void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
unsigned long exp_time);
next reply other threads:[~2012-11-26 5:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-26 5:20 Saravana [this message]
2012-11-26 9:10 ` RFC[4/4] mac80211: add statistic to debugfs Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B2FC03.4050101@posedge.com \
--to=saravanad@posedge.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.