From: Gary Thomas <samoht.yrag@gmail.com>
To: meta-freescale@yoctoproject.org
Subject: Re: [meta-fsl-arm][PATCH v3 0/8] iMX6 Yocto Support based on 12.09.01 BSP
Date: Mon, 26 Nov 2012 11:27:45 -0700 [thread overview]
Message-ID: <50B3B4A1.5030400@gmail.com> (raw)
In-Reply-To: <CA+jg_OVo1hFDRE06ewh3mzx9o_UtmK_sks7jsDnR48DNJ_qy7A@mail.gmail.com>
On 2012-11-26 11:04, Daiane Angolini wrote:
> I'm using LVDS and it is not working as well.
>
> I don't know tsc2004, where do you connect this display?
>
> You could try to use egalaxy driver, may you do that? (and let me know
> the results =P)
That driver is compiled in and it's trying to use it, but failing.
I get this error when I boot:
egalax_ts 2-0004: egalax_ts: failed to read firmware version
egalax_ts: probe of 2-0004 failed with error -5
I had this working with a previous kernel, using these modules:
egalax_ts
tsc2004
galcore
n.b. when you reply, please quote what you are replying to. If you
read these messages via email (as I do), all context is lost and it's
really hard to figure out what you are saying. Not everyone uses
Google Group's swank interface!
next prev parent reply other threads:[~2012-11-26 18:27 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 18:49 [meta-fsl-arm][PATCH v3 0/8] iMX6 Yocto Support based on 12.09.01 BSP Otavio Salvador
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 1/8] linux-imx (3.0.35): Move defconfig to mx6 directory Otavio Salvador
2012-11-23 11:13 ` Daiane Angolini
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 2/8] linux-imx (3.0.35): Configure GPU module to be builtin Otavio Salvador
2012-11-23 11:08 ` Daiane Angolini
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 3/8] gpu-viv-bin-mx6q: Add Vivant GPU libraries Otavio Salvador
2012-11-23 11:09 ` Daiane Angolini
2012-11-23 11:11 ` Daiane Angolini
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 4/8] xf86-dri-vivante: Add Vivant DRI driver for Xorg Otavio Salvador
2012-11-23 11:10 ` Daiane Angolini
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 5/8] xf86-video-imxfb-vivante: Add Vivant Xorg driver for iMX SoCs Otavio Salvador
2012-11-23 11:15 ` Daiane Angolini
2012-11-23 11:22 ` Otavio Salvador
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 6/8] mesa-dri: Change provided set of libraries when building for iMX6 Otavio Salvador
2012-11-23 11:16 ` Daiane Angolini
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 7/8] xserver-xf86-config: Use Vivant accelerated driver " Otavio Salvador
2012-11-22 18:54 ` Fabio Estevam
2012-11-23 11:20 ` Daiane Angolini
2012-11-22 18:49 ` [meta-fsl-arm][PATCH v3 8/8] imx-base: Use xf86-video-imxfb-vivant for iMX6 targets Otavio Salvador
2012-11-23 11:16 ` Daiane Angolini
2012-11-23 11:18 ` [meta-fsl-arm][PATCH v3 0/8] iMX6 Yocto Support based on 12.09.01 BSP Daiane Angolini
2012-11-23 11:35 ` Otavio Salvador
2012-11-27 17:24 ` Otavio Salvador
2012-11-26 16:23 ` Thomas Senyk
2012-11-26 16:45 ` Otavio Salvador
2012-11-26 17:00 ` Daiane Angolini
2012-11-26 16:53 ` Thomas Senyk
2012-11-26 17:12 ` Otavio Salvador
2012-11-26 17:48 ` Thomas Senyk
2012-11-26 18:16 ` Otavio Salvador
2012-11-26 17:08 ` Otavio Salvador
2012-11-26 17:56 ` [meta-fsl-arm][PATCH] Remove warning about vivante driver being stripped Alexandre Belloni
2012-11-26 18:21 ` Otavio Salvador
2012-11-26 18:33 ` Alexandre Belloni
2012-11-26 18:35 ` Otavio Salvador
2012-11-26 20:02 ` Alexandre Belloni
2012-11-26 18:34 ` Otavio Salvador
2012-11-26 21:33 ` Alexandre Belloni
2012-11-27 10:31 ` Otavio Salvador
2012-11-26 17:59 ` [meta-fsl-arm][PATCH v3 0/8] iMX6 Yocto Support based on 12.09.01 BSP Gary Thomas
2012-11-26 18:04 ` Daiane Angolini
2012-11-26 18:27 ` Gary Thomas [this message]
2012-11-26 18:40 ` Otavio Salvador
2012-11-26 18:54 ` Gary Thomas
2012-11-26 18:57 ` Otavio Salvador
2012-11-27 3:13 ` Fabio Estevam
2012-11-27 17:52 ` Fabio Estevam
2012-11-27 18:13 ` Gary Thomas
2012-11-27 18:17 ` Fabio Estevam
2012-11-27 18:33 ` Gary Thomas
2012-11-27 18:35 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B3B4A1.5030400@gmail.com \
--to=samoht.yrag@gmail.com \
--cc=meta-freescale@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.