From: "José Miguel Gonçalves" <jose.goncalves@inov.pt>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board
Date: Tue, 27 Nov 2012 14:56:03 +0000 [thread overview]
Message-ID: <50B4D483.7040000@inov.pt> (raw)
In-Reply-To: <1348253268-21812-1-git-send-email-jose.goncalves@inov.pt>
Hi,
Can you tell me if this patch series is going to be included on next u-boot release?
Do you need anything from my side in order to push this?
Best regards,
Jos? Gon?alves
On 21-09-2012 19:47, Jos? Miguel Gon?alves wrote:
> Support for the MINI2416 board based on a Samsung's S3C2416 SoC with
> 64MB DDR2 SDRAM, 256MB NAND Flash, a LAN9220 Ethernet Controller and a
> WM8731 Audio CODEC.
>
> Changes for v2:
> - Coding style cleanup
> - Removed new serial and rtc drivers
> - Use of in-tree serial and rtc drivers
>
> Changes for v3:
> - Rebased on new SPL framework:
> http://github.com/trini/u-boot WIP/spl-improvements
> - Removed patch "ARM: fix relocation on ARM926EJS"
> - Add patch to configure printf() inclusion on SPL
> - Changed new binary target name from u-boot-ubl.bin to u-boot-pad.bin
> - Removed magic numbers
> - Checkpatch clean except:
> - False positive:
> ERROR: spaces required around that ':' (ctx:VxV)
> #692: FILE: include/configs/mini2416.h:165:
> +#define CONFIG_ETHADDR FE:11:22:33:44:55
> - Following preexistent coding style:
> WARNING: please, no spaces at the start of a line
> #1716: FILE: include/common.h:631:
> + defined(CONFIG_S3C24XX) || \$
>
> Changes for v4:
> - NAND Flash driver cleanup and optimization
>
> Changes for v5:
> - Changed image filename for SPL + u-boot
> - Minor change in the NAND Flash driver
> - Coding style cleanup
> - Removal of #define CONFIG_SYS_BAUDRATE_TABLE as this in the defaults now
> - Checkpatch clean with the exceptions indicated in the v3 changes
>
> Jos? Miguel Gon?alves (11):
> Add configuration option to select printf() inclusion on SPL
> S3C24XX: Add core support for Samsung's S3C24XX SoCs
> serial: Add support to 4 ports in serial_s3c24x0
> serial: Use a more precise baud rate generation for serial_s3c24x0
> serial: Remove unnecessary delay in serial_s3c24x0
> rtc: Improve rtc_get() on s3c24x0_rtc
> rtc: Fix rtc_reset() on s3c24x0_rtc
> rtc: Don't allow setting unsuported years on s3c24x0_rtc
> S3C24XX: Add NAND Flash driver
> Add u-boot-with-spl.bin target to the Makefile
> S3C24XX: Add support to MINI2416 board
>
> MAINTAINERS | 4 +
> Makefile | 11 +-
> README | 3 +
> arch/arm/cpu/arm926ejs/s3c24xx/Makefile | 56 +++
> arch/arm/cpu/arm926ejs/s3c24xx/cpu.c | 57 +++
> arch/arm/cpu/arm926ejs/s3c24xx/cpu_info.c | 57 +++
> arch/arm/cpu/arm926ejs/s3c24xx/s3c2412_speed.c | 114 +++++
> arch/arm/cpu/arm926ejs/s3c24xx/s3c2416_speed.c | 116 +++++
> arch/arm/cpu/arm926ejs/s3c24xx/timer.c | 152 ++++++
> arch/arm/include/asm/arch-s3c24xx/s3c2412.h | 130 +++++
> arch/arm/include/asm/arch-s3c24xx/s3c2416.h | 183 +++++++
> arch/arm/include/asm/arch-s3c24xx/s3c24x0_cpu.h | 41 ++
> arch/arm/include/asm/arch-s3c24xx/s3c24xx.h | 615 +++++++++++++++++++++++
> arch/arm/include/asm/arch-s3c24xx/s3c24xx_cpu.h | 30 ++
> arch/arm/include/asm/arch-s3c24xx/spl.h | 29 ++
> board/boardcon/mini2416/Makefile | 47 ++
> board/boardcon/mini2416/config.mk | 4 +
> board/boardcon/mini2416/mini2416.c | 104 ++++
> board/boardcon/mini2416/mini2416_spl.c | 202 ++++++++
> board/boardcon/mini2416/u-boot-spl.lds | 63 +++
> boards.cfg | 1 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/s3c24xx_nand.c | 255 ++++++++++
> drivers/rtc/s3c24x0_rtc.c | 30 +-
> drivers/serial/serial_s3c24x0.c | 52 +-
> include/common.h | 12 +
> include/configs/VCMA9.h | 2 +-
> include/configs/mini2416.h | 202 ++++++++
> include/configs/smdk2410.h | 2 +-
> spl/Makefile | 4 +-
> 30 files changed, 2550 insertions(+), 29 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/cpu.c
> create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/cpu_info.c
> create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/s3c2412_speed.c
> create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/s3c2416_speed.c
> create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/timer.c
> create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c2412.h
> create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c2416.h
> create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c24x0_cpu.h
> create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c24xx.h
> create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c24xx_cpu.h
> create mode 100644 arch/arm/include/asm/arch-s3c24xx/spl.h
> create mode 100644 board/boardcon/mini2416/Makefile
> create mode 100644 board/boardcon/mini2416/config.mk
> create mode 100644 board/boardcon/mini2416/mini2416.c
> create mode 100644 board/boardcon/mini2416/mini2416_spl.c
> create mode 100644 board/boardcon/mini2416/u-boot-spl.lds
> create mode 100644 drivers/mtd/nand/s3c24xx_nand.c
> create mode 100644 include/configs/mini2416.h
>
next prev parent reply other threads:[~2012-11-27 14:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-21 18:47 [U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 01/11] Add configuration option to select printf() inclusion on SPL José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 03/11] serial: Add support to 4 ports in serial_s3c24x0 José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0 José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 05/11] serial: Remove unnecessary delay in serial_s3c24x0 José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 06/11] rtc: Improve rtc_get() on s3c24x0_rtc José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 07/11] rtc: Fix rtc_reset() " José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 08/11] rtc: Don't allow setting unsuported years " José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 09/11] S3C24XX: Add NAND Flash driver José Miguel Gonçalves
2013-11-14 1:56 ` [U-Boot] [U-Boot,v5,09/11] " Scott Wood
2013-11-14 8:31 ` José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 10/11] Add u-boot-with-spl.bin target to the Makefile José Miguel Gonçalves
2012-09-21 18:47 ` [U-Boot] [PATCH v5 11/11] S3C24XX: Add support to MINI2416 board José Miguel Gonçalves
2012-11-27 14:56 ` José Miguel Gonçalves [this message]
2012-11-27 19:05 ` [U-Boot] [PATCH v5 00/11] " Scott Wood
2012-11-27 22:58 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B4D483.7040000@inov.pt \
--to=jose.goncalves@inov.pt \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.