From: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH 4/5] staging:iio:imu: adis16400 switch from sw_ring to kfifo
Date: Fri, 30 Nov 2012 14:58:04 +0000 [thread overview]
Message-ID: <50B8C97C.7020200@kernel.org> (raw)
In-Reply-To: <50B8C441.1040407@metafoo.de>
On 11/30/2012 02:35 PM, Lars-Peter Clausen wrote:
> On 11/30/2012 03:22 PM, Jonathan Cameron wrote:
>> sw ring is going away so switch over to kfifo based buffer implementation.
>> The only real change is that poll will return on some data there rather than
>> buffer 50% full.
>>
>> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
>
> Is is ok for you to drop this one and wait with the last patch in the series
> still a bit? I've patches to switch this driver over to the adislib and this
> patch would probably introduce a couple of conflicts.
>
> The rest of the series looks good.
*laughs* I guessed as much, but decided it was quicker to write the patch and
have you request I hold it than to send you an email to ask if you had such a
patch and then wait for the response.
Should have known you'd get back almost instantly.
These are very much for the next cycle, so I am happy to do as you
requested!
>
> Thanks,
> - Lars
>
>> ---
>> drivers/staging/iio/imu/Kconfig | 2 +-
>> drivers/staging/iio/imu/adis16400_ring.c | 12 ++++++------
>> 2 files changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/staging/iio/imu/Kconfig b/drivers/staging/iio/imu/Kconfig
>> index 2c2f47d..b9d9c14 100644
>> --- a/drivers/staging/iio/imu/Kconfig
>> +++ b/drivers/staging/iio/imu/Kconfig
>> @@ -6,7 +6,7 @@ menu "Inertial measurement units"
>> config ADIS16400
>> tristate "Analog Devices ADIS16400 and similar IMU SPI driver"
>> depends on SPI
>> - select IIO_SW_RING if IIO_BUFFER
>> + select IIO_KFIFO_BUF if IIO_BUFFER
>> select IIO_TRIGGER if IIO_BUFFER
>> help
>> Say yes here to build support for Analog Devices adis16300, adis16344,
>> diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
>> index d46c1e3..319c2c0 100644
>> --- a/drivers/staging/iio/imu/adis16400_ring.c
>> +++ b/drivers/staging/iio/imu/adis16400_ring.c
>> @@ -7,7 +7,7 @@
>> #include <linux/export.h>
>>
>> #include <linux/iio/iio.h>
>> -#include "../ring_sw.h"
>> +#include <linux/iio/kfifo_buf.h>
>> #include <linux/iio/trigger_consumer.h>
>> #include "adis16400.h"
>>
>> @@ -161,7 +161,7 @@ done:
>> void adis16400_unconfigure_ring(struct iio_dev *indio_dev)
>> {
>> iio_dealloc_pollfunc(indio_dev->pollfunc);
>> - iio_sw_rb_free(indio_dev->buffer);
>> + iio_kfifo_free(indio_dev->buffer);
>> }
>>
>> static const struct iio_buffer_setup_ops adis16400_ring_setup_ops = {
>> @@ -175,7 +175,7 @@ int adis16400_configure_ring(struct iio_dev *indio_dev)
>> int ret = 0;
>> struct iio_buffer *ring;
>>
>> - ring = iio_sw_rb_allocate(indio_dev);
>> + ring = iio_kfifo_allocate(indio_dev);
>> if (!ring) {
>> ret = -ENOMEM;
>> return ret;
>> @@ -193,12 +193,12 @@ int adis16400_configure_ring(struct iio_dev *indio_dev)
>> indio_dev->id);
>> if (indio_dev->pollfunc == NULL) {
>> ret = -ENOMEM;
>> - goto error_iio_sw_rb_free;
>> + goto error_iio_kfifo_free;
>> }
>>
>> indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
>> return 0;
>> -error_iio_sw_rb_free:
>> - iio_sw_rb_free(indio_dev->buffer);
>> +error_iio_kfifo_free:
>> + iio_kfifo_free(indio_dev->buffer);
>> return ret;
>> }
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2012-11-30 14:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-30 14:22 [PATCH 0/5] staging:iio: drop sw_ring buffer implementation Jonathan Cameron
2012-11-30 14:22 ` [PATCH 1/5] staging:iio:accel:lis3l02dq remove sw_ring support Jonathan Cameron
2012-11-30 14:22 ` [PATCH 2/5] staging:iio:impedance-analyzer switch from sw_ring to kfifo Jonathan Cameron
2012-11-30 14:22 ` [PATCH 3/5] staging:iio:meter:ade7758 " Jonathan Cameron
2012-11-30 14:22 ` [PATCH 4/5] staging:iio:imu: adis16400 " Jonathan Cameron
2012-11-30 14:35 ` Lars-Peter Clausen
2012-11-30 14:58 ` Jonathan Cameron [this message]
2012-11-30 14:22 ` [PATCH 5/5] staging:iio: drop sw_ring buffer implementation Jonathan Cameron
2013-01-19 13:49 ` [PATCH 0/5] " Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B8C97C.7020200@kernel.org \
--to=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.