From: "Piotr Haber" <phaber@broadcom.com>
To: "Steven Rostedt" <rostedt@goodmis.org>
Cc: "Frederic Weisbecker" <fweisbec@gmail.com>,
"Ingo Molnar" <mingo@redhat.com>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: [BUG] ftrace: available_filter_functions empty after unloading module
Date: Fri, 7 Dec 2012 09:06:59 +0100 [thread overview]
Message-ID: <50C1A3A3.8030107@broadcom.com> (raw)
In-Reply-To: <1354817428.17101.10.camel@gandalf.local.home>
On 12/06/12 19:10, Steven Rostedt wrote:
> On Thu, 2012-12-06 at 15:56 +0100, Piotr Haber wrote:
>> Hi,
>> not sure if this is a bug or just my misuse of ftrace.
>> I get this warring after unloading a module that i traced before (used
>> function tracer and 'brcmsmac*' as filter in set_ftrace_filter).
>> After that reading available_filter_functions gives "No such device".
>>
>> Regards
>> Piotr
>>
>> ------------[ cut here ]------------
>
> We need to really remove that "cut here", because it causes people to
> leave out other important information :-( Or I could just add a print
> that says...
>
>
> *** Ignore the "cut here" below, and send the output after the end of
> the cut as well *****
>
>
>> WARNING: at kernel/trace/ftrace.c:1564
>> __ftrace_hash_rec_update.part.34+0x20d/0x250()
>> Hardware name: Latitude E6420
>> Modules linked in: brcmsmac(O) brcmutil(O) bcma(O) mac80211(O)
>> cfg80211(O) rfkill(O) arc4 cordic fuse ip6table_filter ip6_tables
>> ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state
>> nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter
>> ip_tables bridge stp llc snd_hda_codec_hdmi snd_hda_codec_idt coretemp
>> kvm_intel snd_hda_intel kvm snd_hda_codec nouveau ttm drm_kms_helper drm
>> ghash_clmulni_intel aesni_intel snd_hwdep snd_pcm_oss snd_mixer_oss
>> snd_pcm ablk_helper snd_seq_dummy snd_seq_oss i2c_algo_bit i2c_core
>> mxm_wmi cryptd lrw pl2303 usbserial snd_seq_midi aes_x86_64 snd_rawmidi
>> xts snd_seq_midi_event gf128mul snd_seq video snd_timer ppdev
>> dell_laptop dell_wmi serio_raw sparse_keymap dcdbas snd_seq_device snd
>> microcode lpc_ich mfd_core parport_pc wmi soundcore snd_page_alloc lp
>> parport ipv6 ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom
>> crc32c_intel ahci libahci sdhci_pci sdhci mmc_core e1000e [last
>> unloaded: rfkill]
>> Pid: 2498, comm: bash Tainted: G O 3.7.0-rc8 #3
>> Call Trace:
>> [<ffffffff810574ff>] warn_slowpath_common+0x7f/0xc0
>> [<ffffffff8105755a>] warn_slowpath_null+0x1a/0x20
>> [<ffffffff810fdd7d>] __ftrace_hash_rec_update.part.34+0x20d/0x250
>> [<ffffffff810fea15>] ftrace_hash_move+0x1c5/0x1e0
>> [<ffffffff81100388>] ftrace_regex_release+0x98/0x150
>> [<ffffffff8118f7ac>] __fput+0xcc/0x290
>> [<ffffffff8118f97e>] ____fput+0xe/0x10
>> [<ffffffff810798e7>] task_work_run+0xa7/0xe0
>> [<ffffffff81015a64>] do_notify_resume+0x74/0x80
>> [<ffffffff81289eee>] ? trace_hardirqs_on_thunk+0x3a/0x3f
>> [<ffffffff8157ed12>] int_signal+0x12/0x17
>> ---[ end trace 476f7270ba7905df ]---
>
> I know the issue but not the cause. The report should show more
> information after this blurb that tells me what went wrong. Do you still
> have access to the dump? Can you send me that, or if not, can you
> reproduce it and give me you full dmesg?
>
> Thanks!
>
> -- Steve
Hi,
sorry to disappoint you, but there is really nothing more around the
warning.
I know it is not helpful, maybe i can do some more tracing if you tell
me how
Here it is with broader context:
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: Calling CRDA to update world
regulatory domain
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: World regulatory domain updated:
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: (start_freq - end_freq @
bandwidth), (max_antenna_gain, max_eirp)
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: (2402000 KHz - 2472000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: (2457000 KHz - 2482000 KHz
@ 20000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: (2474000 KHz - 2494000 KHz
@ 20000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: (5170000 KHz - 5250000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:22:27 lb-bun-52 kernel: cfg80211: (5735000 KHz - 5835000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus0: Found chip with id 0xA8D8,
rev 0x01 and package 0x0A
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus0: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus0: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus0: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x0F, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus0: Bus registered
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus1: Found chip with id 0x4313,
rev 0x01 and package 0x08
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus1: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus1: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus1: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x11, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus1: Bus registered
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus2: Found chip with id 0x4313,
rev 0x01 and package 0x08
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus2: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus2: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus2: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x11, class 0x0)
Dec 6 15:22:27 lb-bun-52 kernel: bcma: bus2: Bus registered
Dec 6 15:22:27 lb-bun-52 kernel: brcmsmac bcma0:0: mfg 4bf core 812 rev
23 class 0 irq 16
Dec 6 15:22:27 lb-bun-52 kernel: ieee80211 phy0: Selected rate control
algorithm 'minstrel_ht'
Dec 6 15:22:27 lb-bun-52 kernel: Registered led device: brcmsmac-phy0:radio
Dec 6 15:22:27 lb-bun-52 kernel: brcmsmac bcma1:0: mfg 4bf core 812 rev
24 class 0 irq 17
Dec 6 15:22:27 lb-bun-52 kernel: ieee80211 phy1: Selected rate control
algorithm 'minstrel_ht'
Dec 6 15:22:27 lb-bun-52 kernel: Registered led device: brcmsmac-phy1:radio
Dec 6 15:22:27 lb-bun-52 kernel: brcmsmac bcma2:0: mfg 4bf core 812 rev
24 class 0 irq 16
Dec 6 15:22:27 lb-bun-52 kernel: ieee80211 phy2: Selected rate control
algorithm 'minstrel_ht'
Dec 6 15:22:27 lb-bun-52 kernel: Registered led device: brcmsmac-phy2:radio
Dec 6 15:22:34 lb-bun-52 kernel: ------------[ cut here ]------------
Dec 6 15:22:34 lb-bun-52 kernel: WARNING: at kernel/trace/ftrace.c:1564
__ftrace_hash_rec_update.part.34+0x20d/0x250()
Dec 6 15:22:34 lb-bun-52 kernel: Hardware name: Latitude E6420
Dec 6 15:22:34 lb-bun-52 kernel: Modules linked in: brcmsmac(O)
brcmutil(O) bcma(O) mac80211(O) cfg80211(O) rfkill(O) arc4 cordic fuse
ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_i
pv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM
iptable_mangle iptable_filter ip_tables bridge stp llc
snd_hda_codec_hdmi snd_hda_codec_idt coretemp kvm_intel snd_hda_intel
kvm snd_h
da_codec nouveau ttm drm_kms_helper drm ghash_clmulni_intel aesni_intel
snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm ablk_helper snd_seq_dummy
snd_seq_oss i2c_algo_bit i2c_core mxm_wmi cryptd lrw pl2
303 usbserial snd_seq_midi aes_x86_64 snd_rawmidi xts snd_seq_midi_event
gf128mul snd_seq video snd_timer ppdev dell_laptop dell_wmi serio_raw
sparse_keymap dcdbas snd_seq_device snd microcode lpc_i
ch mfd_core parport_pc wmi soundcore snd_page_alloc lp parport ipv6 ext4
mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom crc32c_intel ahci libahci
sdhci_pci sdhci mmc_core e1000e [last unloaded: rfkill]
Dec 6 15:22:34 lb-bun-52 kernel: Pid: 2498, comm: bash Tainted: G
O 3.7.0-rc8 #3
Dec 6 15:22:34 lb-bun-52 kernel: Call Trace:
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff810574ff>]
warn_slowpath_common+0x7f/0xc0
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff8105755a>]
warn_slowpath_null+0x1a/0x20
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff810fdd7d>]
__ftrace_hash_rec_update.part.34+0x20d/0x250
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff810fea15>]
ftrace_hash_move+0x1c5/0x1e0
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff81100388>]
ftrace_regex_release+0x98/0x150
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff8118f7ac>] __fput+0xcc/0x290
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff8118f97e>] ____fput+0xe/0x10
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff810798e7>]
task_work_run+0xa7/0xe0
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff81015a64>]
do_notify_resume+0x74/0x80
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff81289eee>] ?
trace_hardirqs_on_thunk+0x3a/0x3f
Dec 6 15:22:34 lb-bun-52 kernel: [<ffffffff8157ed12>] int_signal+0x12/0x17
Dec 6 15:22:34 lb-bun-52 kernel: ---[ end trace 476f7270ba7905df ]---
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: Calling CRDA to update world
regulatory domain
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: World regulatory domain updated:
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: (start_freq - end_freq @
bandwidth), (max_antenna_gain, max_eirp)
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: (2402000 KHz - 2472000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: (2457000 KHz - 2482000 KHz
@ 20000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: (2474000 KHz - 2494000 KHz
@ 20000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: (5170000 KHz - 5250000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:35:41 lb-bun-52 kernel: cfg80211: (5735000 KHz - 5835000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus0: Found chip with id 0xA8D8,
rev 0x01 and package 0x0A
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus0: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus0: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus0: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x0F, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus0: Bus registered
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus1: Found chip with id 0x4313,
rev 0x01 and package 0x08
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus1: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus1: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus1: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x11, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus1: Bus registered
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus2: Found chip with id 0x4313,
rev 0x01 and package 0x08
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus2: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus2: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus2: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x11, class 0x0)
Dec 6 15:35:41 lb-bun-52 kernel: bcma: bus2: Bus registered
Dec 6 15:35:41 lb-bun-52 kernel: brcmsmac bcma0:0: mfg 4bf core 812 rev
23 class 0 irq 16
Dec 6 15:35:41 lb-bun-52 kernel: ieee80211 phy0: Selected rate control
algorithm 'minstrel_ht'
Dec 6 15:35:41 lb-bun-52 kernel: brcmsmac bcma1:0: mfg 4bf core 812 rev
24 class 0 irq 17
Dec 6 15:35:41 lb-bun-52 kernel: ieee80211 phy1: Selected rate control
algorithm 'minstrel_ht'
Dec 6 15:35:41 lb-bun-52 kernel: brcmsmac bcma2:0: mfg 4bf core 812 rev
24 class 0 irq 16
Dec 6 15:35:41 lb-bun-52 kernel: ieee80211 phy2: Selected rate control
algorithm 'minstrel_ht'
Dec 6 15:57:55 lb-bun-52 kernel: Kernel logging (proc) stopped.
next prev parent reply other threads:[~2012-12-07 8:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-06 14:56 [BUG] ftrace: available_filter_functions empty after unloading module Piotr Haber
2012-12-06 18:10 ` Steven Rostedt
2012-12-07 8:06 ` Piotr Haber [this message]
2012-12-07 13:57 ` Steven Rostedt
2012-12-10 11:45 ` Piotr Haber
2012-12-13 13:34 ` Steven Rostedt
2012-12-13 17:08 ` Steven Rostedt
2012-12-13 19:39 ` Steven Rostedt
2012-12-14 0:05 ` Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50C1A3A3.8030107@broadcom.com \
--to=phaber@broadcom.com \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.