[U-Boot] [PATCH 05/14] S3C64XX: reference s5p cpu time system for s3c64xx timer

[Minkyu Kang <mk7.kang@samsung.com>]

On 15/08/12 22:48, Zhong Hongbo wrote:
> From: Zhong Hongbo <bocui107@gmail.com>
> 
> The old s3c64xx timer is not work normal, Adopt s5p time design,
> It work perfect.
> 
> Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
> ---
> Change for V4:
> 	- None.
> Change for V3:
> 	- None.
> Change for V2:
> 	- Delete const key word for the variable of struct s3c_timer
> ---
>  arch/arm/cpu/arm1176/s3c64xx/timer.c |  193 ++++++++++++++++------------------
>  1 files changed, 93 insertions(+), 100 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm1176/s3c64xx/timer.c b/arch/arm/cpu/arm1176/s3c64xx/timer.c
> index f16a37b..47d7731 100644
> --- a/arch/arm/cpu/arm1176/s3c64xx/timer.c
> +++ b/arch/arm/cpu/arm1176/s3c64xx/timer.c
> @@ -1,23 +1,8 @@
>  /*
> - * (C) Copyright 2003
> - * Texas Instruments <www.ti.com>
> + * Copyright (C) 2012
> + * Zhong Hongbo <bocui107@163.com>
>   *
> - * (C) Copyright 2002
> - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> - * Marius Groeger <mgroeger@sysgo.de>
> - *
> - * (C) Copyright 2002
> - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> - * Alex Zuepke <azu@sysgo.de>
> - *
> - * (C) Copyright 2002-2004
> - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
> - *
> - * (C) Copyright 2004
> - * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
> - *
> - * (C) Copyright 2008
> - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
> + * based on arch/arm/cpu/armv7/s5p-common/timer.c
>   *
>   * See file CREDITS for list of people who contributed to this
>   * project.
> @@ -39,64 +24,29 @@
>   */
>  
>  #include <common.h>
> -#include <asm/proc-armv/ptrace.h>
> +#include <asm/io.h>
>  #include <asm/arch/s3c6400.h>
> -#include <div64.h>
> -
> -static ulong timer_load_val;
> +#include <asm/arch/pwm.h>
> +#include <pwm.h>
>  
> -#define PRESCALER	167
> +DECLARE_GLOBAL_DATA_PTR;
>  
> -static s3c64xx_timers *s3c64xx_get_base_timers(void)
> -{
> -	return (s3c64xx_timers *)ELFIN_TIMER_BASE;
> -}
> +static unsigned long get_current_tick(void);
>  
>  /* macro to read the 16 bit timer */
> -static inline ulong read_timer(void)
> +static inline struct s3c_timer *s3c_get_base_timer(void)
>  {
> -	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
> -
> -	return timers->TCNTO4;
> +	return (struct s3c_timer *)s3c64xx_get_base_timer();
>  }
>  
> -/* Internal tick units */
> -/* Last decremneter snapshot */
> -static unsigned long lastdec;
> -/* Monotonic incrementing timer */
> -static unsigned long long timestamp;
> -
>  int timer_init(void)
>  {
> -	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
> -
> -	/* use PWM Timer 4 because it has no output */
> -	/*
> -	 * We use the following scheme for the timer:
> -	 * Prescaler is hard fixed at 167, divider at 1/4.
> -	 * This gives at PCLK frequency 66MHz approx. 10us ticks
> -	 * The timer is set to wrap after 100s, at 66MHz this obviously
> -	 * happens after 10,000,000 ticks. A long variable can thus
> -	 * keep values up to 40,000s, i.e., 11 hours. This should be
> -	 * enough for most uses:-) Possible optimizations: select a
> -	 * binary-friendly frequency, e.g., 1ms / 128. Also calculate
> -	 * the prescaler automatically for other PCLK frequencies.
> -	 */
> -	timers->TCFG0 = PRESCALER << 8;
> -	if (timer_load_val == 0) {
> -		timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */
> -		timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000;
> -	}
> -
> -	/* load value for 10 ms timeout */
> -	lastdec = timers->TCNTB4 = timer_load_val;
> -	/* auto load, manual update of Timer 4 */
> -	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO |
> -		TCON_4_UPDATE;
> +	/* PWM Timer 4 */
> +	pwm_init(4, MUX_DIV_2, 0);
> +	pwm_config(4, 0, 0);
> +	pwm_enable(4);
>  
> -	/* auto load, start Timer 4 */
> -	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON;
> -	timestamp = 0;
> +	reset_timer_masked();
>  
>  	return 0;
>  }
> @@ -104,57 +54,100 @@ int timer_init(void)
>  /*
>   * timer without interrupts
>   */
> -
> -/*
> - * This function is derived from PowerPC code (read timebase as long long).
> - * On ARM it just returns the timer value.
> - */
> -unsigned long long get_ticks(void)
> +unsigned long get_timer(unsigned long base)
>  {
> -	ulong now = read_timer();
> +	return get_timer_masked() - base;
> +}
>  
> -	if (lastdec >= now) {
> -		/* normal mode */
> -		timestamp += lastdec - now;
> +/* delay x useconds */
> +void __udelay(unsigned long usec)
> +{
> +	struct s3c_timer *timer = s3c_get_base_timer();
> +	unsigned long tmo, tmp, count_value;
> +
> +	count_value = readl(&timer->tcntb4);
> +
> +	if (usec >= 1000) {
> +		/*
> +		 * if "big" number, spread normalization
> +		 * to seconds
> +		 * 1. start to normalize for usec to ticks per sec
> +		 * 2. find number of "ticks" to wait to achieve target
> +		 * 3. finish normalize.
> +		 */
> +		tmo = usec / 1000;
> +		tmo *= (CONFIG_SYS_HZ * count_value);
> +		tmo /= 1000;
>  	} else {
> -		/* we have an overflow ... */
> -		timestamp += lastdec + timer_load_val - now;
> +		/* else small number, don't kill it prior to HZ multiply */
> +		tmo = usec * CONFIG_SYS_HZ * count_value;
> +		tmo /= (1000 * 1000);
>  	}
> -	lastdec = now;
>  
> -	return timestamp;
> +	/* get current timestamp */
> +	tmp = get_current_tick();
> +
> +	/* if setting this fordward will roll time stamp */
> +	/* reset "advancing" timestamp to 0, set lastinc value */
> +	/* else, set advancing stamp wake up time */
> +	if ((tmo + tmp + 1) < tmp)
> +		reset_timer_masked();
> +	else
> +		tmo += tmp;
> +
> +	/* loop till event */
> +	while (get_current_tick() < tmo)

please remove this blank line

> +
> +		;	/* nop */
>  }
>  

Thanks.
Minkyu Kang.