From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:33382 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758211Ab2LHVrw (ORCPT ); Sat, 8 Dec 2012 16:47:52 -0500 Message-ID: <50C3B567.3070300@iki.fi> Date: Sat, 08 Dec 2012 23:47:19 +0200 From: Antti Palosaari MIME-Version: 1.0 To: Matthew Gyurgyik CC: =?ISO-8859-1?Q?Frank_Sch=E4fer?= , Devin Heitmueller , Linux Media Mailing List Subject: Re: em28xx: msi Digivox ATSC board id [0db0:8810] References: <50B5779A.9090807@pyther.net> <50B6967C.9070801@iki.fi> <50B6C2DF.4020509@pyther.net> <50B6C530.4010701@iki.fi> <50B7B768.5070008@googlemail.com> <50B80FBB.5030208@pyther.net> <50BB3F2C.5080107@googlemail.com> <50BB6451.7080601@iki.fi> <50BB8D72.8050803@googlemail.com> <50BCEC60.4040206@googlemail.com> <50BD5CC3.1030100@pyther.net> <50BD6310.8000808@pyther.net> <50BE65F0.8020303@googlemail.com> <50BEC253.4080006@pyther.net> <50BF3F9A.3020803@iki.fi> <50BFBE39.90901@pyther.net> <50BFC445.6020305@iki.fi> <50BFCBBB.5090407@pyther.net> <50BFECEA.9060808@iki.fi> <50BFFFF6.1000204@pyther.net> <50C11301.10205@googlemail.com> <50C12302.80603@pyther.net> <50C34628.5030407@googlemail.com> <50C34A50.6000207@pyther.net> <50C35AD1.3040000@googlemail.com> <50C3701D.9000700@pyther .net> <50C37DA8.4080608@googlemai l.com> <50C3B3EB.40606@pyther.net> In-Reply-To: <50C3B3EB.40606@pyther.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: On 12/08/2012 11:40 PM, Matthew Gyurgyik wrote: > On 12/08/2012 12:49 PM, Frank Schäfer wrote: >> Am 08.12.2012 17:51, schrieb Matthew Gyurgyik: >> >> That shouldn't be necessary. I just noticed that there is a module >> parameter 'ir_debug'. ;) >> With ir_debug enabled, you should see messages >> >> em28xx_ir_handle_key: toggle: XX, count: XX, key XXYYZZ >> >> everytime you press a button. Once we know the key codes, we can set up >> a key map (if it doesn't exist yet). >> > > Maybe I'm doing something wrong but didn't have any luck :( > >> [root@tux ~]# sudo rmmod em28xx_rc >> [root@tux ~]# sudo rmmod em28xx_dvb >> [root@tux ~]# sudo rmmod em28xx >> [root@tux ~]# modprobe em28xx_rc ir_debug=1 > > I don't see any additional messages in dmesg. > > I verified the remote still works in windows (a stupidity check on my part) Maybe Kernel debugs are not enabled? em28xx driver is a little bit legacy in logging too as it uses own logging whilst nowadays dynamic logging is recommended. replace KERN_DEBUG as KERN_INFO inside em28xx-input.c and test. It will change driver to use Kernel normal log writings instead of current debug ones. regards Antti -- http://palosaari.fi/