Re: [Qemu-devel] new pc-bios/bios.bin breaks freebsd booting

[Paolo Bonzini <pbonzini@redhat.com>]

[-- Attachment #1: Type: text/plain, Size: 2725 bytes --]

Il 12/12/2012 17:04, Luigi Rizzo ha scritto:
> I am not sure if it has been reported already but this commit
> 
> http://git.qemu.org/?p=qemu.git;a=commitdiff;h=d7a51dbbaa70677846453f8c961590913052dd86
> 
> (replacing pc-bios/bios.bin with a newer version)
> breaks booting of FreeBSD on recent qemu (starting roughly with
> qemu-1.3.0-rc2).
> 
> Using a FreeBSD host, and a FreeBSD guest,
> the qemu thread runs at 100% and the console is stuck
> after the 'pci0' probe:
> 
>                            
> ...
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>        
> Timecounter "HPET" frequency 100000000 Hz quality 950                  
>         
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900                
>        
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0  
>        
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0                
>         
> pci0: <ACPI PCI bus> on pcib0
> 
> Reverting the bios fixes things.
> I wonder if it isn't the case of reverting this change ?

Not reverting the change (which fixes other things), but yes---we should
get the fix into SeaBIOS.

I don't have a FreeBSD VM handy, can you try the attached BIOS so I can
have your Tested-by?  The patch I used is after my signature.

Paolo

diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl
index 8019b71..b58ef62 100644
--- a/src/acpi-dsdt.dsl
+++ b/src/acpi-dsdt.dsl
@@ -187,7 +187,7 @@ DefinitionBlock (
 
                 prt_slot0(0x0000),
                 /* Device 1 is power mgmt device, and can only use irq 9 */
-                Package() { 0x1ffff, 0,    0, 9 },
+                Package() { 0x1ffff, 0, LNKS, 0 },
                 Package() { 0x1ffff, 1, LNKB, 0 },
                 Package() { 0x1ffff, 2, LNKC, 0 },
                 Package() { 0x1ffff, 3, LNKD, 0 },
@@ -278,6 +278,22 @@ DefinitionBlock (
         define_link(LNKB, 1, PRQ1)
         define_link(LNKC, 2, PRQ2)
         define_link(LNKD, 3, PRQ3)
+
+        Device(LNKS) {
+            Name(_HID, EISAID("PNP0C0F"))
+            Name(_UID, 4)
+            Name(_PRS, ResourceTemplate() {
+                Interrupt(, Level, ActiveHigh, Shared) { 9 }
+            })
+
+            // The SCI cannot be disabled and is always attached to GSI 9,
+            // so these are no-ops.  We only need this link to override the
+            // polarity to active high and match the content of the MADT.
+            Method(_STA, 0, NotSerialized) { Return (0x0b) }
+            Method(_DIS, 0, NotSerialized) { }
+            Method(_CRS, 0, NotSerialized) { Return (_PRS) }
+            Method(_SRS, 1, NotSerialized) { }
+        }
     }
 
 #include "acpi-dsdt-cpu-hotplug.dsl"


[-- Attachment #2: bios.bin --]
[-- Type: application/octet-stream, Size: 131072 bytes --]