All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Kiszka <jan.kiszka@siemens.com>
To: Lucas Meneghel Rodrigues <lmr@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	Alexander Graf <agraf@suse.de>,
	Marcelo Tosatti <mtosatti@redhat.com>,
	"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
	"kraxel@redhat.com" <kraxel@redhat.com>
Subject: Re: [Qemu-devel] [PATCH 2/2] hw: Add test device for unittests execution v6
Date: Thu, 13 Dec 2012 16:54:54 +0100	[thread overview]
Message-ID: <50C9FA4E.3050203@siemens.com> (raw)
In-Reply-To: <1355410133-3281-4-git-send-email-lmr@redhat.com>

On 2012-12-13 15:48, Lucas Meneghel Rodrigues wrote:
> Add a test device which supports the kvmctl ioports,
> so one can run the KVM unittest suite.
> 
> Intended Usage:
> 
> qemu-system-x86_64\
> -device pc-testdev -serial stdio \
> -device isa-debugexit,iobase=0xf4,access-size=4 \
> -kernel /path/to/kvm/unittests/msr.flat
> 
> Where msr.flat is one of the KVM unittests, present on a
> separate repo,
> 
> git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
> 
> Changes from v5:
> * Fixed rebase mistake
> 
> Changes from v4:
> * Pass iomem_buf as an opaque, as requested by Blue
> * Ported to new MMIO schema, as requested by Jan
> 
> Changes from v3:
> * Ported all register_ioport functions to memory API
> 
> Changes from v2:
> 
> * Rename struct testdev to PCTestdev
> * Embed ioport_data into PCTestdev struct
> * Porting most register_ioport functions to memory API
> 
> Changes from v1:
> 
> * Removed unused testdev member
> * Renamed device to a less generic name, pc-testdev
> 
> Initial changes from initial attempt:
> 
> * Removed port 0xf1, since now kvm-unit-tests use
>   serial
> * Removed exit code port 0xf4, since that can be
>   replaced by
> 
> -device isa-debugexit,iobase=0xf4,access-size=4
> 
> * Removed ram size port 0xd1, since guest memory
>   size can be retrieved from firmware, there's a
>   patch for kvm-unit-tests including an API to
>   retrieve that value.
> 
> CC: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Alexander Graf <agraf@suse.de>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
> Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
> ---
>  hw/i386/Makefile.objs |    1 +
>  hw/pc-testdev.c       |  156 +++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 157 insertions(+)
>  create mode 100644 hw/pc-testdev.c
> 
> diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs
> index 56aaa9d..1ac5fc5 100644
> --- a/hw/i386/Makefile.objs
> +++ b/hw/i386/Makefile.objs
> @@ -12,5 +12,6 @@ obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o
>  obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o xen_pt_msi.o
>  obj-y += kvm/
>  obj-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
> +obj-y += pc-testdev.o
>  
>  obj-y := $(addprefix ../,$(obj-y))
> diff --git a/hw/pc-testdev.c b/hw/pc-testdev.c
> new file mode 100644
> index 0000000..75889e7
> --- /dev/null
> +++ b/hw/pc-testdev.c
> @@ -0,0 +1,156 @@
> +/*
> + * QEMU x86 ISA testdev
> + *
> + * Copyright (c) 2012 Avi Kivity, Gerd Hoffmann, Marcelo Tosatti
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +/*
> + * This device is used to test KVM features specific to the x86 port, such
> + * as emulation, power management, interrupt routing, among others. It's meant
> + * to be used like:
> + *
> + * qemu-system-x86_64 -device pc-testdev -serial stdio \
> + * -device isa-debugexit,iobase=0xf4,access-size=2 \
> + * -kernel /home/lmr/Code/virt-test.git/kvm/unittests/msr.flat
> + *
> + * Where msr.flat is one of the KVM unittests, present on a separate repo,
> + * git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
> +*/
> +
> +#include <sys/mman.h>

This (and mprotect below) breaks win32 build. You should limit this
feature of the test device to UNIX platforms.

Jan

> +#include "hw.h"
> +#include "qdev.h"
> +#include "isa.h"
> +#include "exec-memory.h"
> +
> +#define IOMEM_LEN    0x10000
> +
> +typedef struct PCTestdev {
> +    ISADevice dev;
> +    MemoryRegion iomem;
> +    uint32_t ioport_data;
> +    char iomem_buf[IOMEM_LEN];
> +} PCTestdev;
> +
> +#define TYPE_TESTDEV "pc-testdev"
> +#define TESTDEV(obj) \
> +     OBJECT_CHECK(struct PCTestdev, (obj), TYPE_TESTDEV)
> +
> +static void test_device_irq_line(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    struct PCTestdev *dev = opaque;
> +    qemu_set_irq(isa_get_irq(&dev->dev, addr - 0x2000), !!data);
> +}
> +
> +static void test_device_ioport_write(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    struct PCTestdev *dev = opaque;
> +    dev->ioport_data = data;
> +}
> +
> +static uint32_t test_device_ioport_read(void *opaque, uint32_t addr)
> +{
> +    struct PCTestdev *dev = opaque;
> +    return dev->ioport_data;
> +}
> +
> +static void test_device_flush_page(void *opaque, uint32_t addr, uint32_t data)
> +{
> +    hwaddr len = 4096;
> +    void *a = cpu_physical_memory_map(data & ~0xffful, &len, 0);
> +
> +    /* We might not be able to get the full page, only mprotect what we actually
> +       have mapped */
> +    mprotect(a, len, PROT_NONE);
> +    mprotect(a, len, PROT_READ|PROT_WRITE);
> +    cpu_physical_memory_unmap(a, len, 0, 0);
> +}
> +
> +static uint64_t test_iomem_read(void *opaque, hwaddr addr, unsigned len)
> +{
> +    struct PCTestdev *dev = opaque;
> +    uint64_t ret = 0;
> +    memcpy(&ret, &dev->iomem_buf[addr], len);
> +    ret = le64_to_cpu(ret);
> +
> +    return ret;
> +}
> +
> +static void test_iomem_write(void *opaque, hwaddr addr, uint64_t val,
> +                             unsigned len)
> +{
> +    struct PCTestdev *dev = opaque;
> +    val = cpu_to_le64(val);
> +    memcpy(&dev->iomem_buf[addr], &val, len);
> +    dev->iomem_buf[addr] = val;
> +}
> +
> +static const MemoryRegionOps test_iomem_ops = {
> +    .read = test_iomem_read,
> +    .write = test_iomem_write,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> +static const MemoryRegionPortio test_dev_portio_list[] = {
> +    { 0xe0, 1, 1, .read = test_device_ioport_read, .write = test_device_ioport_write, },
> +    { 0xe0, 1, 2, .read = test_device_ioport_read, .write = test_device_ioport_write, },
> +    { 0xe0, 1, 4, .read = test_device_ioport_read, .write = test_device_ioport_write, },
> +    { 0xe4, 1, 4, .write = test_device_flush_page, },
> +    { 0x2000, 24, 1, .write = test_device_irq_line, },
> +    PORTIO_END_OF_LIST(),
> +};
> +
> +static int init_test_device(ISADevice *isa)
> +{
> +    struct PCTestdev *dev = DO_UPCAST(struct PCTestdev, dev, isa);
> +
> +    PortioList *test_dev_port_list = g_new(PortioList, 1);
> +    portio_list_init(test_dev_port_list, test_dev_portio_list,
> +                     NULL, "pc-testdev");
> +    portio_list_add(test_dev_port_list, get_system_io(), 0x0);
> +
> +    memory_region_init_io(&dev->iomem, &test_iomem_ops, dev,
> +                          "pc-testdev", IOMEM_LEN);
> +    memory_region_add_subregion(isa_address_space(&dev->dev), 0xff000000,
> +                                                  &dev->iomem);
> +    return 0;
> +}
> +
> +static void testdev_class_init(ObjectClass *klass, void *data)
> +{
> +    ISADeviceClass *k = ISA_DEVICE_CLASS(klass);
> +
> +    k->init = init_test_device;
> +}
> +
> +static TypeInfo testdev_info = {
> +    .name           = "pc-testdev",
> +    .parent         = TYPE_ISA_DEVICE,
> +    .instance_size  = sizeof(struct PCTestdev),
> +    .class_init     = testdev_class_init,
> +};
> +
> +static void testdev_register_types(void)
> +{
> +    type_register_static(&testdev_info);
> +}
> +
> +type_init(testdev_register_types)
> 

-- 
Siemens AG, Corporate Technology, CT RTC ITP SDP-DE
Corporate Competence Center Embedded Linux

      reply	other threads:[~2012-12-13 15:55 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-13 14:48 [Qemu-devel] [PATCH 0/2] Add pc-testdev to qemu v6 Lucas Meneghel Rodrigues
2012-12-13 14:48 ` [Qemu-devel] [PATCH 1/2] hw: add isa-debug-exit device Lucas Meneghel Rodrigues
2012-12-13 14:48 ` [Qemu-devel] [PATCH 1/2] hw: add isa-debug-exit device v3 Lucas Meneghel Rodrigues
2012-12-13 15:40   ` Andreas Färber
2012-12-13 22:13     ` Hervé Poussineau
2012-12-19  1:41   ` Lucas Meneghel
2012-12-19  8:49     ` Gerd Hoffmann
2012-12-13 14:48 ` [Qemu-devel] [PATCH 2/2] hw: Add test device for unittests execution v6 Lucas Meneghel Rodrigues
2012-12-13 15:54   ` Jan Kiszka [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50C9FA4E.3050203@siemens.com \
    --to=jan.kiszka@siemens.com \
    --cc=agraf@suse.de \
    --cc=kraxel@redhat.com \
    --cc=lmr@redhat.com \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.