From: "Андрей Павлов" <7134956@gmail.com>
To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>
Subject: [PATCH] For new revision of the board AVerMedia Hybrid TV / Radio (A16D)
Date: Thu, 20 Dec 2012 06:48:14 +0300 [thread overview]
Message-ID: <50D28A7E.9080209@gmail.com> (raw)
Hello,
I'm trying to add support for card AVerMedia Hybrid TV / Radio (A16D)
two new revisions. subsystem: 1461:fb36, subsystem: 1461:fc36.
The card capable of DVB-T, analog TV and FM radio.
--- drivers/media/pci/saa7134/saa7134-cards.c.orig 2012-12-17
22:14:54.000000000 +0300
+++ drivers/media/pci/saa7134/saa7134-cards.c 2012-12-20
04:01:51.673631779 +0300
@@ -6858,6 +6858,18 @@
.subdevice = 0xf936,
.driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xfb36, /*A16D-ZL10353*/
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xfc36, /*A16D-ANALOG*/
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
+ }, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
The result is:
[ 22.893960] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 22.894167] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18,
latency: 64, mmio: 0xfebff800
[ 22.894322] saa7133[0]: subsystem: 1461:fb36, board: AVerMedia Hybrid
TV/Radio (A16D) [card=137,autodetected]
[ 22.894502] saa7133[0]: board init: gpio is 200000
[ 23.068033] saa7133[0]: i2c eeprom 00: 61 14 36 fb 00 00 00 00 00 00
00 00 00 00 00 00
[ 23.068960] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 23.069876] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 10 ff ff ff ff
[ 23.070795] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.071709] saa7133[0]: i2c eeprom 40: ff 6a 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 23.072643] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.073558] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.074470] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.075384] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.076314] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.077233] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.078144] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.079030] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.079915] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.080820] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.081708] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.660110] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 23.887953] xc2028 1-0061: creating new instance
[ 23.888099] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 23.889581] saa7133[0]: registered device video0 [v4l2]
[ 23.889961] saa7133[0]: registered device vbi0
[ 23.922834] saa7133[0]: registered device radio0
[ 23.928898] xc2028 1-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 23.975442] dvb_init() allocating 1 frontend
[ 24.023475] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3),
id 0000000000000000.
[ 24.551822] saa7134 ALSA driver for DMA sound loaded
[ 24.551987] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18
registered as card -1
[ 33.092040] (0), id 00000000000000ff:
[ 33.092112] xc2028 1-0061: Loading firmware for type=(0), id
0000000100000007.
[ 33.260020] xc2028 1-0061: Loading SCODE for type=MONO SCODE
HAS_IF_5320 (60008000), id 0000000f00000007.
[ 33.382173] ppdev: user-space parallel port driver
[ 33.460032] xc2028 1-0061: Loading firmware for type=BASE FM (401),
id 0000000000000000.
[ 41.824143] xc2028 1-0061: Loading firmware for type=FM (400), id
0000000000000000.
[ 42.144085] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3),
id 0000000000000000.
[ 50.728030] (0), id 00000000000000ff:
[ 50.728133] xc2028 1-0061: Loading firmware for type=(0), id
0000000100000007.
[ 50.896027] xc2028 1-0061: Loading SCODE for type=MONO SCODE
HAS_IF_5320 (60008000), id 0000000f00000007.
[ 51.088666] xc2028 1-0061: Error on line 1293: -5
[ 51.093507] xc2028 1-0061: Error on line 1293: -5
With this patch board starts and takes the analog signal. To receive a
DVB-T, add the support demodulator zl10353 вместо Zarlink MT352
Any ideas?
reply other threads:[~2012-12-20 0:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50D28A7E.9080209@gmail.com \
--to=7134956@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.