All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data
Date: Fri, 21 Dec 2012 18:19:34 +0900	[thread overview]
Message-ID: <50D429A6.1080105@samsung.com> (raw)
In-Reply-To: <CAPnjgZ3CMmgSSZduxfKBjsLODr_soEe7YDWx+bMMBO964AhvUA@mail.gmail.com>

On 12/20/2012 10:55 AM, Simon Glass wrote:
> Hi Amar,
> 
> On Mon, Dec 17, 2012 at 3:19 AM, Amar <amarendra.xt@samsung.com> wrote:
>> Add DWMMC device node data for exynos5
>>
>> Signed-off-by: Amar <amarendra.xt@samsung.com>
>> ---
>>  arch/arm/dts/exynos5250.dtsi              |   32 +++++++++++++++++++++++++++++
>>  board/samsung/dts/exynos5250-smdk5250.dts |   24 +++++++++++++++++++++
> 
> Do you also have a binding file for this please?
> 
>>  2 files changed, 56 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
>> index 1008797..b701ae5 100644
>> --- a/arch/arm/dts/exynos5250.dtsi
>> +++ b/arch/arm/dts/exynos5250.dtsi
>> @@ -138,4 +138,36 @@
>>                 reg = <0x131b0000 0x30>;
>>                 interrupts = <0 130 0>;
>>         };
>> +
>> +       dwmmc at 12200000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               compatible = "samsung,exynos5250-dwmmc";
>> +               reg = <0x12200000 0x1000>;
>> +               interrupts = <0 75 0>;
>> +       };
>> +
>> +       dwmmc at 12210000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               compatible = "samsung,exynos5250-dwmmc";
>> +               reg = <0x12210000 0x1000>;
>> +               interrupts = <0 76 0>;
>> +       };
>> +
>> +       dwmmc at 12220000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               compatible = "samsung,exynos5250-dwmmc";
>> +               reg = <0x12220000 0x1000>;
>> +               interrupts = <0 77 0>;
>> +       };
>> +
>> +       dwmmc at 12230000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               compatible = "samsung,exynos5250-dwmmc";
>> +               reg = <0x12230000 0x1000>;
>> +               interrupts = <0 78 0>;
>> +       };
>>  };
>> diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
>> index a8e62da..b1b8d71 100644
>> --- a/board/samsung/dts/exynos5250-smdk5250.dts
>> +++ b/board/samsung/dts/exynos5250-smdk5250.dts
>> @@ -30,6 +30,10 @@
>>                 spi2 = "/spi at 12d40000";
>>                 spi3 = "/spi at 131a0000";
>>                 spi4 = "/spi at 131b0000";
>> +               dwmmc0 = "/dwmmc at 12200000";
>> +               dwmmc1 = "/dwmmc at 12210000";
>> +               dwmmc2 = "/dwmmc at 12220000";
>> +               dwmmc3 = "/dwmmc at 12230000";
>>         };
>>
>>         sromc at 12250000 {
>> @@ -59,4 +63,24 @@
>>                         compatible = "wolfson,wm8994-codec";
>>                 };
>>         };
>> +
>> +       dwmmc at 12200000 {
>> +               index = <0>;
> 
> Do you really need the index? You have the numbering from the aliaes I think.
> 
>> +               bus-width = <8>;
>> +               timing = <1 3 3>;
> 
> Might need a "samsung," prefix on these?
I think better that use the "exynos" instead of "samsung".
how about?
> 
>> +       };
>> +
>> +       dwmmc at 12210000 {
>> +               status = "disabled";
>> +       };
>> +
>> +       dwmmc at 12220000 {
>> +               index = <2>;
>> +               bus-width = <4>;
>> +               timing = <1 2 3>;
>> +       };
>> +
>> +       dwmmc at 12230000 {
>> +               status = "disabled";
>> +       };
>>  };
>> --
>> 1.7.0.4
>>
> 
> Regards,
> Simon
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 

  reply	other threads:[~2012-12-21  9:19 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-17 11:19 [U-Boot] [PATCH 0/9] EXYNOS5: Enable dwmmc Amar
2012-12-17 11:19 ` [U-Boot] [PATCH 1/9] FDT: Add compatible string for DWMMC Amar
2012-12-20  1:53   ` Simon Glass
2012-12-17 11:19 ` [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data Amar
2012-12-20  1:55   ` Simon Glass
2012-12-21  9:19     ` Jaehoon Chung [this message]
2012-12-21 21:24       ` Simon Glass
2012-12-24  6:54         ` Amarendra Reddy
2012-12-17 11:19 ` [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC Amar
2012-12-20  2:23   ` Simon Glass
2012-12-21  5:16     ` Amarendra Reddy
2012-12-21  9:18       ` Jaehoon Chung
2012-12-24  7:20         ` Amarendra Reddy
2012-12-17 11:19 ` [U-Boot] [PATCH 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor Amar
2012-12-20  2:24   ` Simon Glass
2012-12-21  5:18     ` Amarendra Reddy
2012-12-17 11:19 ` [U-Boot] [PATCH 6/9] SMDK5250: Enable DWMMC Amar
2012-12-20  2:29   ` Simon Glass
2012-12-21  5:27     ` Amarendra Reddy
2012-12-17 11:19 ` [U-Boot] [PATCH 7/9] MMC: APIs to support creation of boot partition Amar
2012-12-20  2:31   ` Simon Glass
2012-12-20 13:57     ` Amarendra Reddy
2012-12-17 11:19 ` [U-Boot] [PATCH 8/9] SMDK5250: Enable eMMC booting Amar
2012-12-20  2:35   ` Simon Glass
2012-12-20 13:53     ` Amarendra Reddy
2012-12-26 19:59       ` Simon Glass
2012-12-27  3:55         ` Amarendra Reddy
2012-12-17 11:19 ` [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support " Amar
2012-12-20  2:40   ` Simon Glass
2012-12-20 13:45     ` Amarendra Reddy
  -- strict thread matches above, loose matches on Subject: below --
2012-12-28 15:52 [U-Boot] [PATCH V2 0/9] EXYNOS5: Enable dwmmc Amar
2012-12-28 15:52 ` [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data Amar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50D429A6.1080105@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.