From: Phil Turmel <philip@turmel.org>
To: Mark Knecht <markknecht@gmail.com>
Cc: Linux-RAID <linux-raid@vger.kernel.org>
Subject: Re: md: kicking non-fresh sdf3 from array!
Date: Thu, 27 Dec 2012 14:57:13 -0500 [thread overview]
Message-ID: <50DCA819.80809@turmel.org> (raw)
In-Reply-To: <CAK2H+effDWFWP32wO4vXPSQ16tgZKdBwvQRRiq+Qpy03VCE6xA@mail.gmail.com>
Hi Mark,
On 12/27/2012 01:48 PM, Mark Knecht wrote:
[trim /]
> I'd like to check that the following commands would be the recommended
> way to get the RAID6 back into a good state.
>
> /sbin/mdadm /dev/md3 --fail /dev/sdf3 --remove /dev/sdf3
Shouldn't need the above, /dev/sdf3 isn't in the array.
> /sbin/mdadm /dev/md3 --add /dev/sdf3
mdadm may whine about the superblock, but should let you proceed. But
yes, this is correct.
If you had a bitmap on the array, you would have been able to --re-add
without a full rebuild. (On newer versions of mdadm, --add implies
--re-add if all the conditions are met.)
Phil
next prev parent reply other threads:[~2012-12-27 19:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 18:48 md: kicking non-fresh sdf3 from array! Mark Knecht
2012-12-27 19:57 ` Phil Turmel [this message]
[not found] ` <CAK2H+ecBALbrpshYQ5TZhuOJh_kgXqi_C90Zp-FtCgaE4dEgSw@mail.gmail.com>
[not found] ` <50DCAE69.1080003@turmel.org>
2012-12-27 20:25 ` Phil Turmel
2012-12-27 20:52 ` Mark Knecht
2012-12-27 21:38 ` Mark Knecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50DCA819.80809@turmel.org \
--to=philip@turmel.org \
--cc=linux-raid@vger.kernel.org \
--cc=markknecht@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.