diff for duplicates of <50DDC743.2080606@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 8a83c6f..374f10f 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -14,7 +14,7 @@ On 12/20/2012 01:41 PM, Bryan Wu wrote: > - HDMI output > - UART and JTAG > -> Signed-off-by: Bryan Wu <pengw-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> +> Signed-off-by: Bryan Wu <pengw@nvidia.com> > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/tegra30-beaver.dts | 374 ++++++++++++++++++++++++++++++++++ @@ -139,32 +139,32 @@ Rob > + }; > + }; > + -> + serial@70006000 { +> + serial at 70006000 { > + status = "okay"; > + clock-frequency = <408000000>; > + }; > + -> + i2c@7000c000 { +> + i2c at 7000c000 { > + status = "okay"; > + clock-frequency = <100000>; > + }; > + -> + i2c@7000c400 { +> + i2c at 7000c400 { > + status = "okay"; > + clock-frequency = <100000>; > + }; > + -> + i2c@7000c500 { +> + i2c at 7000c500 { > + status = "okay"; > + clock-frequency = <100000>; > + }; > + -> + i2c@7000c700 { +> + i2c at 7000c700 { > + status = "okay"; > + clock-frequency = <100000>; > + }; > + -> + i2c@7000d000 { +> + i2c at 7000d000 { > + status = "okay"; > + clock-frequency = <100000>; > + @@ -181,7 +181,7 @@ Rob > + ti,vsel1-state-high; > + }; > + -> + pmic: tps65911@2d { +> + pmic: tps65911 at 2d { > + compatible = "ti,tps65911"; > + reg = <0x2d>; > + @@ -286,10 +286,10 @@ Rob > + }; > + }; > + -> + spi@7000da00 { +> + spi at 7000da00 { > + status = "okay"; > + spi-max-frequency = <25000000>; -> + spi-flash@1 { +> + spi-flash at 1 { > + compatible = "winbond,w25q32"; > + reg = <1>; > + spi-max-frequency = <20000000>; @@ -297,7 +297,7 @@ Rob > + }; > + > + ahub { -> + i2s@70080400 { +> + i2s at 70080400 { > + status = "okay"; > + }; > + }; @@ -307,7 +307,7 @@ Rob > + nvidia,invert-interrupt; > + }; > + -> + sdhci@78000000 { +> + sdhci at 78000000 { > + status = "okay"; > + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ > + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ @@ -315,7 +315,7 @@ Rob > + bus-width = <4>; > + }; > + -> + sdhci@78000600 { +> + sdhci at 78000600 { > + status = "okay"; > + bus-width = <8>; > + }; @@ -325,7 +325,7 @@ Rob > + #address-cells = <1>; > + #size-cells = <0>; > + -> + vdd_5v_in_reg: regulator@0 { +> + vdd_5v_in_reg: regulator at 0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "vdd_5v_in"; @@ -334,7 +334,7 @@ Rob > + regulator-always-on; > + }; > + -> + chargepump_5v_reg: regulator@1 { +> + chargepump_5v_reg: regulator at 1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "chargepump_5v"; @@ -346,7 +346,7 @@ Rob > + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ > + }; > + -> + ddr_reg: regulator@2 { +> + ddr_reg: regulator at 2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "vdd_ddr"; @@ -359,7 +359,7 @@ Rob > + vin-supply = <&vdd_5v_in_reg>; > + }; > + -> + vdd_5v_sata_reg: regulator@3 { +> + vdd_5v_sata_reg: regulator at 3 { > + compatible = "regulator-fixed"; > + reg = <3>; > + regulator-name = "vdd_5v_sata"; @@ -372,7 +372,7 @@ Rob > + vin-supply = <&vdd_5v_in_reg>; > + }; > + -> + usb1_vbus_reg: regulator@4 { +> + usb1_vbus_reg: regulator at 4 { > + compatible = "regulator-fixed"; > + reg = <4>; > + regulator-name = "usb1_vbus"; @@ -384,7 +384,7 @@ Rob > + vin-supply = <&vdd_5v_in_reg>; > + }; > + -> + usb3_vbus_reg: regulator@5 { +> + usb3_vbus_reg: regulator at 5 { > + compatible = "regulator-fixed"; > + reg = <5>; > + regulator-name = "usb3_vbus"; @@ -396,7 +396,7 @@ Rob > + vin-supply = <&vdd_5v_in_reg>; > + }; > + -> + sys_3v3_reg: regulator@6 { +> + sys_3v3_reg: regulator at 6 { > + compatible = "regulator-fixed"; > + reg = <6>; > + regulator-name = "sys_3v3,vdd_3v3_alw"; @@ -409,7 +409,7 @@ Rob > + vin-supply = <&vdd_5v_in_reg>; > + }; > + -> + sys_3v3_pexs_reg: regulator@7 { +> + sys_3v3_pexs_reg: regulator at 7 { > + compatible = "regulator-fixed"; > + reg = <7>; > + regulator-name = "sys_3v3_pexs"; diff --git a/a/content_digest b/N1/content_digest index cfd21e5..fda45ea 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,8 @@ "ref\01356032489-27619-1-git-send-email-pengw@nvidia.com\0" - "ref\01356032489-27619-1-git-send-email-pengw-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org\0" - "From\0Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Subject\0Re: [PATCH 1/2] ARM: DT: tegra: Add Tegra30 Beaver board support\0" + "From\0robherring2@gmail.com (Rob Herring)\0" + "Subject\0[PATCH 1/2] ARM: DT: tegra: Add Tegra30 Beaver board support\0" "Date\0Fri, 28 Dec 2012 10:22:27 -0600\0" - "To\0Bryan Wu <pengw-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\0" - "Cc\0swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org" - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org - " cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 12/20/2012 01:41 PM, Bryan Wu wrote:\n" @@ -27,7 +21,7 @@ "> - HDMI output\n" "> - UART and JTAG\n" "> \n" - "> Signed-off-by: Bryan Wu <pengw-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>\n" + "> Signed-off-by: Bryan Wu <pengw@nvidia.com>\n" "> ---\n" "> arch/arm/boot/dts/Makefile | 3 +-\n" "> arch/arm/boot/dts/tegra30-beaver.dts | 374 ++++++++++++++++++++++++++++++++++\n" @@ -152,32 +146,32 @@ "> +\t\t};\n" "> +\t};\n" "> +\n" - "> +\tserial@70006000 {\n" + "> +\tserial at 70006000 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tclock-frequency = <408000000>;\n" "> +\t};\n" "> +\n" - "> +\ti2c@7000c000 {\n" + "> +\ti2c at 7000c000 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tclock-frequency = <100000>;\n" "> +\t};\n" "> +\n" - "> +\ti2c@7000c400 {\n" + "> +\ti2c at 7000c400 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tclock-frequency = <100000>;\n" "> +\t};\n" "> +\n" - "> +\ti2c@7000c500 {\n" + "> +\ti2c at 7000c500 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tclock-frequency = <100000>;\n" "> +\t};\n" "> +\n" - "> +\ti2c@7000c700 {\n" + "> +\ti2c at 7000c700 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tclock-frequency = <100000>;\n" "> +\t};\n" "> +\n" - "> +\ti2c@7000d000 {\n" + "> +\ti2c at 7000d000 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tclock-frequency = <100000>;\n" "> +\n" @@ -194,7 +188,7 @@ "> +\t\t\tti,vsel1-state-high;\n" "> +\t\t};\n" "> +\n" - "> +\t\tpmic: tps65911@2d {\n" + "> +\t\tpmic: tps65911 at 2d {\n" "> +\t\t\tcompatible = \"ti,tps65911\";\n" "> +\t\t\treg = <0x2d>;\n" "> +\n" @@ -299,10 +293,10 @@ "> +\t\t};\n" "> +\t};\n" "> +\n" - "> +\tspi@7000da00 {\n" + "> +\tspi at 7000da00 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tspi-max-frequency = <25000000>;\n" - "> +\t\tspi-flash@1 {\n" + "> +\t\tspi-flash at 1 {\n" "> +\t\t\tcompatible = \"winbond,w25q32\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tspi-max-frequency = <20000000>;\n" @@ -310,7 +304,7 @@ "> +\t};\n" "> +\n" "> +\tahub {\n" - "> +\t\ti2s@70080400 {\n" + "> +\t\ti2s at 70080400 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\t};\n" @@ -320,7 +314,7 @@ "> +\t\tnvidia,invert-interrupt;\n" "> +\t};\n" "> +\n" - "> +\tsdhci@78000000 {\n" + "> +\tsdhci at 78000000 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tcd-gpios = <&gpio 69 0>; /* gpio PI5 */\n" "> +\t\twp-gpios = <&gpio 155 0>; /* gpio PT3 */\n" @@ -328,7 +322,7 @@ "> +\t\tbus-width = <4>;\n" "> +\t};\n" "> +\n" - "> +\tsdhci@78000600 {\n" + "> +\tsdhci at 78000600 {\n" "> +\t\tstatus = \"okay\";\n" "> +\t\tbus-width = <8>;\n" "> +\t};\n" @@ -338,7 +332,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\tvdd_5v_in_reg: regulator@0 {\n" + "> +\t\tvdd_5v_in_reg: regulator at 0 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tregulator-name = \"vdd_5v_in\";\n" @@ -347,7 +341,7 @@ "> +\t\t\tregulator-always-on;\n" "> +\t\t};\n" "> +\n" - "> +\t\tchargepump_5v_reg: regulator@1 {\n" + "> +\t\tchargepump_5v_reg: regulator at 1 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tregulator-name = \"chargepump_5v\";\n" @@ -359,7 +353,7 @@ "> +\t\t\tgpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */\n" "> +\t\t};\n" "> +\n" - "> +\t\tddr_reg: regulator@2 {\n" + "> +\t\tddr_reg: regulator at 2 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <2>;\n" "> +\t\t\tregulator-name = \"vdd_ddr\";\n" @@ -372,7 +366,7 @@ "> +\t\t\tvin-supply = <&vdd_5v_in_reg>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tvdd_5v_sata_reg: regulator@3 {\n" + "> +\t\tvdd_5v_sata_reg: regulator at 3 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <3>;\n" "> +\t\t\tregulator-name = \"vdd_5v_sata\";\n" @@ -385,7 +379,7 @@ "> +\t\t\tvin-supply = <&vdd_5v_in_reg>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb1_vbus_reg: regulator@4 {\n" + "> +\t\tusb1_vbus_reg: regulator at 4 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <4>;\n" "> +\t\t\tregulator-name = \"usb1_vbus\";\n" @@ -397,7 +391,7 @@ "> +\t\t\tvin-supply = <&vdd_5v_in_reg>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb3_vbus_reg: regulator@5 {\n" + "> +\t\tusb3_vbus_reg: regulator at 5 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <5>;\n" "> +\t\t\tregulator-name = \"usb3_vbus\";\n" @@ -409,7 +403,7 @@ "> +\t\t\tvin-supply = <&vdd_5v_in_reg>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tsys_3v3_reg: regulator@6 {\n" + "> +\t\tsys_3v3_reg: regulator at 6 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <6>;\n" "> +\t\t\tregulator-name = \"sys_3v3,vdd_3v3_alw\";\n" @@ -422,7 +416,7 @@ "> +\t\t\tvin-supply = <&vdd_5v_in_reg>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tsys_3v3_pexs_reg: regulator@7 {\n" + "> +\t\tsys_3v3_pexs_reg: regulator at 7 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <7>;\n" "> +\t\t\tregulator-name = \"sys_3v3_pexs\";\n" @@ -438,4 +432,4 @@ "> +};\n" > -9a9f931fe49d01678e2fb40ad4fbcd8a24e8a138f034f385eb97b7b5e4d75145 +d001e4df9c9e160a583b0e623fefb9085395b128e3affaf3c2f2956e810154a9
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.