From: Lin Feng <linfeng@cn.fujitsu.com>
To: bhelgaas@google.com
Cc: Lin Feng <linfeng@cn.fujitsu.com>,
linux-pci@vger.kernel.org, izumi.taku@jp.fujitsu.com,
Yinghai Lu <yinghai@kernel.org>, Jiang Liu <liuj97@gmail.com>,
rafael.j.wysocki@intel.com, achiang@hp.com,
gregkh@linuxfoundation.org
Subject: Re: [PATCH] pci-sysfs: replace mutex_lock with mutex_trylock to avoid potential deadlock situation
Date: Thu, 03 Jan 2013 09:47:17 +0800 [thread overview]
Message-ID: <50E4E325.6050203@cn.fujitsu.com> (raw)
In-Reply-To: <1356594177-29453-1-git-send-email-linfeng@cn.fujitsu.com>
Hi all,
Sorry for making noise here.
Is there anyone interested in this problem, any comments?
thanks,
linfeng
On 12/27/2012 03:42 PM, Lin Feng wrote:
> There is a potential deadlock situation when we manipulate the pci-sysfs user
> interfaces from different bus hierarchy simultaneously, described as following:
>
> path1: sysfs remove device: | path2: sysfs rescan device:
> sysfs_schedule_callback_work() | sysfs_write_file()
> remove_callback() | flush_write_buffer()
> *1* mutex_lock(&pci_remove_rescan_mutex)|*2* sysfs_get_active(attr_sd)
> ... | dev_attr_store()
> device_remove_file() | dev_rescan_store()
> ... |*4* mutex_lock(&pci_remove_rescan_mutex)
> *3* sysfs_deactivate(sd) | ...
> wait_for_completion() |*5* sysfs_put_active(attr_sd)
> *6* mutex_unlock(&pci_remove_rescan_mutex)
>
> If path1 firstly holds the pci_remove_rescan_mutex at *1*, then another path
> called path2 actived and runs to *2* before path1 runs to *3*, we now runs
> to a deadlock situation:
> Path1 holds the mutex waiting path2 to decrease sysfs_dirent's s_active
> counter at *5*, but path2 is blocked at *4* when trying to get the
> pci_remove_rescan_mutex. The mutex won't be put by path1 until it reach
> *6*, but it's now blocked at *3*.
>
> The circumvented approach is to avoid manipulating(remove/scan) the pci-tree at
> the same time. If we find someone else is manipulating the pci-tree we simply
> abort current operation without touching the pci-tree concurrently.
>
> *dmesg ifno*:
> (snip)
> 1000e 0000:1c:00.0: eth9: Intel(R) PRO/1000 Network Connection
> sd 13:2:0:0: [sdb] Attached SCSI disk
> e1000e 0000:1c:00.0: eth9: MAC: 0, PHY: 4, PBA No: D50228-005
> e1000e 0000:1c:00.1: Disabling ASPM L1
> e1000e 0000:1c:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> e1000e 0000:1c:00.1: irq 143 for MSI/MSI-X
> e1000e 0000:1c:00.1: eth10: (PCI Express:2.5GT/s:Width x4) 00:15:17:cd:96:bf
> e1000e 0000:1c:00.1: eth10: Intel(R) PRO/1000 Network Connection
> e1000e 0000:1c:00.1: eth10: MAC: 0, PHY: 4, PBA No: D50228-005
> INFO: task bash:62982 blocked for more than 120 seconds.
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> bash D 0000000000000000 0 62982 62978 0x00000080
> ffff88038b277db8 0000000000000082 ffff88038b277fd8 0000000000013940
> ffff88038b276010 0000000000013940 0000000000013940 0000000000013940
> ffff88038b277fd8 0000000000013940 ffff880377449e30 ffff8806e822c670
> Call Trace:
> [<ffffffff8151ba79>] schedule+0x29/0x70
> [<ffffffff8151bd6e>] schedule_preempt_disabled+0xe/0x10
> [<ffffffff8151a4e3>] __mutex_lock_slowpath+0xd3/0x150
> [<ffffffff8151a3eb>] mutex_lock+0x2b/0x50
> [<ffffffff812821dc>] dev_rescan_store+0x5c/0x80
> [<ffffffff81341800>] dev_attr_store+0x20/0x30
> [<ffffffff811e3eef>] sysfs_write_file+0xef/0x170
> [<ffffffff81173d08>] vfs_write+0xc8/0x190
> [<ffffffff81173ed1>] sys_write+0x51/0x90
> [<ffffffff81524b29>] system_call_fastpath+0x16/0x1b
> INFO: task bash:64141 blocked for more than 120 seconds.
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> bash D ffffffff81610460 0 64141 64136 0x00000080
> ffff8803540e9db8 0000000000000086 ffff8803540e9fd8 0000000000013940
> ffff8803540e8010 0000000000013940 0000000000013940 0000000000013940
> ffff8803540e9fd8 0000000000013940 ffff8807db338a10 ffff8806f09abc60
> Call Trace:
> [<ffffffff8151ba79>] schedule+0x29/0x70
> [<ffffffff8151bd6e>] schedule_preempt_disabled+0xe/0x10
> [<ffffffff8151a4e3>] __mutex_lock_slowpath+0xd3/0x150
> [<ffffffff8151a3eb>] mutex_lock+0x2b/0x50
> [<ffffffff812821dc>] dev_rescan_store+0x5c/0x80
> [<ffffffff81341800>] dev_attr_store+0x20/0x30
> [<ffffffff811e3eef>] sysfs_write_file+0xef/0x170
> [<ffffffff81173d08>] vfs_write+0xc8/0x190
> [<ffffffff81173ed1>] sys_write+0x51/0x90
> [<ffffffff81524b29>] system_call_fastpath+0x16/0x1b
> INFO: task kworker/u:3:64451 blocked for more than 120 seconds.
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> kworker/u:3 D ffffffff81610460 0 64451 2 0x00000080
> ffff8807d51b7a30 0000000000000046 ffff8807d51b7fd8 0000000000013940
> ffff8807d51b6010 0000000000013940 0000000000013940 0000000000013940
> ffff8807d51b7fd8 0000000000013940 ffff8807db339420 ffff88037744b250
> Call Trace:
> [<ffffffff8151ba79>] schedule+0x29/0x70
> [<ffffffff81519ded>] schedule_timeout+0x19d/0x220
> [<ffffffff81165f92>] ? __slab_free+0x1f2/0x2f0
> [<ffffffff8151b8fe>] wait_for_common+0x11e/0x190
> [<ffffffff8108a6e0>] ? try_to_wake_up+0x2c0/0x2c0
> [<ffffffff8151ba4d>] wait_for_completion+0x1d/0x20
> [<ffffffff811e53e8>] sysfs_addrm_finish+0xb8/0xd0
> [<ffffffff811e4320>] ? sysfs_schedule_callback+0x1e0/0x1e0
> [<ffffffff811e33f0>] sysfs_hash_and_remove+0x60/0xb0
> [<ffffffff811e43c9>] sysfs_remove_file+0x39/0x50
> [<ffffffff81342cb7>] device_remove_file+0x17/0x20
> [<ffffffff8134505c>] bus_remove_device+0xdc/0x180
> [<ffffffff81342eb0>] device_del+0x120/0x1d0
> [<ffffffff81342f82>] device_unregister+0x22/0x60
> [<ffffffff8127ade4>] pci_stop_bus_device+0x94/0xa0
> [<ffffffff8127ad90>] pci_stop_bus_device+0x40/0xa0
> [<ffffffff8127ad90>] pci_stop_bus_device+0x40/0xa0
> [<ffffffff8127ad90>] pci_stop_bus_device+0x40/0xa0
> [<ffffffff8127af66>] pci_stop_and_remove_bus_device+0x16/0x30
> [<ffffffff81282359>] remove_callback+0x29/0x40
> [<ffffffff811e4344>] sysfs_schedule_callback_work+0x24/0x70
> [<ffffffff81070009>] process_one_work+0x179/0x4b0
> [<ffffffff8107210e>] worker_thread+0x12e/0x330
> [<ffffffff81071fe0>] ? manage_workers+0x110/0x110
> [<ffffffff8107705e>] kthread+0x9e/0xb0
> [<ffffffff81525bc4>] kernel_thread_helper+0x4/0x10
> [<ffffffff81076fc0>] ? kthread_freezable_should_stop+0x70/0x70
> [<ffffffff81525bc0>] ? gs_change+0x13/0x13
>
> Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
> Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com>
> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
> ---
> drivers/pci/pci-sysfs.c | 42 ++++++++++++++++++++++++++----------------
> 1 files changed, 26 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 05b78b1..d2efbb0 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -295,10 +295,13 @@ static ssize_t bus_rescan_store(struct bus_type *bus, const char *buf,
> return -EINVAL;
>
> if (val) {
> - mutex_lock(&pci_remove_rescan_mutex);
> - while ((b = pci_find_next_bus(b)) != NULL)
> - pci_rescan_bus(b);
> - mutex_unlock(&pci_remove_rescan_mutex);
> + if (mutex_trylock(&pci_remove_rescan_mutex)) {
> + while ((b = pci_find_next_bus(b)) != NULL)
> + pci_rescan_bus(b);
> + mutex_unlock(&pci_remove_rescan_mutex);
> + } else {
> + return 0;
> + }
> }
> return count;
> }
> @@ -319,9 +322,12 @@ dev_rescan_store(struct device *dev, struct device_attribute *attr,
> return -EINVAL;
>
> if (val) {
> - mutex_lock(&pci_remove_rescan_mutex);
> - pci_rescan_bus(pdev->bus);
> - mutex_unlock(&pci_remove_rescan_mutex);
> + if (mutex_trylock(&pci_remove_rescan_mutex)) {
> + pci_rescan_bus(pdev->bus);
> + mutex_unlock(&pci_remove_rescan_mutex);
> + } else {
> + return 0;
> + }
> }
> return count;
> }
> @@ -330,9 +336,10 @@ static void remove_callback(struct device *dev)
> {
> struct pci_dev *pdev = to_pci_dev(dev);
>
> - mutex_lock(&pci_remove_rescan_mutex);
> - pci_stop_and_remove_bus_device(pdev);
> - mutex_unlock(&pci_remove_rescan_mutex);
> + if (mutex_trylock(&pci_remove_rescan_mutex)) {
> + pci_stop_and_remove_bus_device(pdev);
> + mutex_unlock(&pci_remove_rescan_mutex);
> + }
> }
>
> static ssize_t
> @@ -366,12 +373,15 @@ dev_bus_rescan_store(struct device *dev, struct device_attribute *attr,
> return -EINVAL;
>
> if (val) {
> - mutex_lock(&pci_remove_rescan_mutex);
> - if (!pci_is_root_bus(bus) && list_empty(&bus->devices))
> - pci_rescan_bus_bridge_resize(bus->self);
> - else
> - pci_rescan_bus(bus);
> - mutex_unlock(&pci_remove_rescan_mutex);
> + if (mutex_trylock(&pci_remove_rescan_mutex)) {
> + if (!pci_is_root_bus(bus) && list_empty(&bus->devices))
> + pci_rescan_bus_bridge_resize(bus->self);
> + else
> + pci_rescan_bus(bus);
> + mutex_unlock(&pci_remove_rescan_mutex);
> + } else {
> + return 0;
> + }
> }
> return count;
> }
>
next prev parent reply other threads:[~2013-01-03 1:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 7:42 [PATCH] pci-sysfs: replace mutex_lock with mutex_trylock to avoid potential deadlock situation Lin Feng
2013-01-03 1:47 ` Lin Feng [this message]
2013-01-24 23:12 ` Bjorn Helgaas
2013-01-25 10:02 ` Gu Zheng
2013-01-25 17:44 ` Bjorn Helgaas
2013-01-25 18:57 ` Yinghai Lu
2013-01-25 20:30 ` Bjorn Helgaas
2013-01-25 20:59 ` Yinghai Lu
2013-01-28 7:38 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50E4E325.6050203@cn.fujitsu.com \
--to=linfeng@cn.fujitsu.com \
--cc=achiang@hp.com \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=izumi.taku@jp.fujitsu.com \
--cc=linux-pci@vger.kernel.org \
--cc=liuj97@gmail.com \
--cc=rafael.j.wysocki@intel.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.