From: Alex Elder <elder@inktank.com>
To: "ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>
Subject: [PATCH REPOST] rbd: combine rbd sync watch/unwatch functions
Date: Fri, 04 Jan 2013 08:55:08 -0600 [thread overview]
Message-ID: <50E6ED4C.7080009@inktank.com> (raw)
The rbd_req_sync_watch() and rbd_req_sync_unwatch() functions are
nearly identical. Combine them into a single function with a flag
indicating whether a watch is to be initiated or torn down.
Signed-off-by: Alex Elder <elder@inktank.com>
---
drivers/block/rbd.c | 81
+++++++++++++++++----------------------------------
1 file changed, 27 insertions(+), 54 deletions(-)
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 7c35608..c1e5f24 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -1429,74 +1429,48 @@ static void rbd_watch_cb(u64 ver, u64 notify_id,
u8 opcode, void *data)
}
/*
- * Request sync osd watch
+ * Request sync osd watch/unwatch. The value of "start" determines
+ * whether a watch request is being initiated or torn down.
*/
-static int rbd_req_sync_watch(struct rbd_device *rbd_dev)
+static int rbd_req_sync_watch(struct rbd_device *rbd_dev, int start)
{
struct ceph_osd_req_op *op;
- struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc;
+ struct ceph_osd_request **linger_req = NULL;
+ __le64 version = 0;
int ret;
op = rbd_create_rw_op(CEPH_OSD_OP_WATCH, 0);
if (!op)
return -ENOMEM;
- ret = ceph_osdc_create_event(osdc, rbd_watch_cb, 0,
- (void *)rbd_dev, &rbd_dev->watch_event);
- if (ret < 0)
- goto fail;
-
- op->watch.ver = cpu_to_le64(rbd_dev->header.obj_version);
- op->watch.cookie = cpu_to_le64(rbd_dev->watch_event->cookie);
- op->watch.flag = 1;
-
- ret = rbd_req_sync_op(rbd_dev,
- CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
- op,
- rbd_dev->header_name,
- 0, 0, NULL,
- &rbd_dev->watch_request, NULL);
-
- if (ret < 0)
- goto fail_event;
-
- rbd_destroy_op(op);
- return 0;
-
-fail_event:
- ceph_osdc_cancel_event(rbd_dev->watch_event);
- rbd_dev->watch_event = NULL;
-fail:
- rbd_destroy_op(op);
- return ret;
-}
-
-/*
- * Request sync osd unwatch
- */
-static int rbd_req_sync_unwatch(struct rbd_device *rbd_dev)
-{
- struct ceph_osd_req_op *op;
- int ret;
+ if (start) {
+ struct ceph_osd_client *osdc;
- op = rbd_create_rw_op(CEPH_OSD_OP_WATCH, 0);
- if (!op)
- return -ENOMEM;
+ osdc = &rbd_dev->rbd_client->client->osdc;
+ ret = ceph_osdc_create_event(osdc, rbd_watch_cb, 0, rbd_dev,
+ &rbd_dev->watch_event);
+ if (ret < 0)
+ goto done;
+ version = cpu_to_le64(rbd_dev->header.obj_version);
+ linger_req = &rbd_dev->watch_request;
+ }
- op->watch.ver = 0;
+ op->watch.ver = version;
op->watch.cookie = cpu_to_le64(rbd_dev->watch_event->cookie);
- op->watch.flag = 0;
+ op->watch.flag = (u8) start ? 1 : 0;
ret = rbd_req_sync_op(rbd_dev,
CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
- op,
- rbd_dev->header_name,
- 0, 0, NULL, NULL, NULL);
-
+ op, rbd_dev->header_name,
+ 0, 0, NULL, linger_req, NULL);
+ if (!start || ret < 0) {
+ ceph_osdc_cancel_event(rbd_dev->watch_event);
+ rbd_dev->watch_event = NULL;
+ }
+done:
rbd_destroy_op(op);
- ceph_osdc_cancel_event(rbd_dev->watch_event);
- rbd_dev->watch_event = NULL;
+
return ret;
}
@@ -3031,7 +3005,7 @@ static int rbd_init_watch_dev(struct rbd_device
*rbd_dev)
int ret, rc;
do {
- ret = rbd_req_sync_watch(rbd_dev);
+ ret = rbd_req_sync_watch(rbd_dev, 1);
if (ret == -ERANGE) {
rc = rbd_dev_refresh(rbd_dev, NULL);
if (rc < 0)
@@ -3750,8 +3724,7 @@ static void rbd_dev_release(struct device *dev)
rbd_dev->watch_request);
}
if (rbd_dev->watch_event)
- rbd_req_sync_unwatch(rbd_dev);
-
+ rbd_req_sync_watch(rbd_dev, 0);
/* clean up and free blkdev */
rbd_free_disk(rbd_dev);
--
1.7.9.5
next reply other threads:[~2013-01-04 14:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 14:55 Alex Elder [this message]
2013-01-17 3:10 ` [PATCH REPOST] rbd: combine rbd sync watch/unwatch functions Josh Durgin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50E6ED4C.7080009@inktank.com \
--to=elder@inktank.com \
--cc=ceph-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.