From: Richard Henderson <rth@twiddle.net>
To: qemu-devel <qemu-devel@nongnu.org>
Cc: agraf@suse.de
Subject: [Qemu-devel] [PULL] target-s390x rewrite
Date: Sun, 06 Jan 2013 11:19:05 -0800 [thread overview]
Message-ID: <50E9CE29.8000205@twiddle.net> (raw)
Now that all the prerequisites are in, I've rebased vs master.
Which has included a few minor include path tweaks due to the
source base reorg.
r~
The following changes since commit 549db5c32bb025501e2eeb23d2e5cc669061eb71:
hw/i386: Fix broken build for non POSIX hosts (2013-01-05 10:14:05 +0000)
are available in the git repository at:
git://repo.or.cz/qemu/rth.git s390-reorg
for you to fetch changes up to 2b35e93fbfc52c2be6cf85e5a54a3707cdabd914:
target-s390: Claim maintainership (2013-01-05 12:18:46 -0800)
----------------------------------------------------------------
Richard Henderson (149):
target-s390: Disassemble more z10 and z196 opcodes
target-s390: Fix disassembly of cpsdr
target-s390: Fix gdbstub
target-s390: Add missing temp_free in gen_op_calc_cc
target-s390: Use TCG registers for FPR
target-s390: Register helpers
target-s390: Fix SACF exit
target-s390: Fix BCR
target-s390: Tidy unconditional BRCL
target-s390: Fix PSW_MASK handling
target-s390: Add format based disassassmbly infrastructure
target-s390: Split out disas_jcc
target-s390: Reorg exception handling
target-s390: Convert ADD HALFWORD
target-s390: Implement SUBTRACT HALFWORD
target-s390: Implement ADD LOGICAL WITH SIGNED IMMEDIATE
target-s390: Convert MULTIPLY HALFWORD, SINGLE
target-s390: Convert 32-bit MULTIPLY, MULTIPLY LOGICAL
target-s390: Convert 64-bit MULTIPLY LOGICAL
target-s390: Convert AND, OR, XOR
target-s390: Convert COMPARE, COMPARE LOGICAL
target-s390: Convert LOAD, LOAD LOGICAL
target-s390: Convert LOAD ADDRESS
target-s390: Convert LOAD (LOGICAL) BYTE, CHARACTER, HALFWORD
target-s390: Convert LOAD AND TEST
target-s390: Convert LOAD LOGICAL IMMEDIATE
target-s390: Convert LOAD COMPLIMENT, POSITIVE, NEGATIVE
target-s390: Convert AND, OR, XOR, INSERT IMMEDIATE
target-s390: Convert STORE
target-s390: Convert ADD LOGICAL CARRY and SUBTRACT LOGICAL BORROW
target-s390: Convert BRANCH AND SAVE
target-s390: Convert BRANCH ON CONDITION
target-s390: Convert BRANCH ON COUNT
target-s390: Convert DIVIDE
target-s390: Send signals for divide
target-s390: Convert TEST UNDER MASK
target-s390: Convert SET ADDRESSING MODE
target-s390: Convert SUPERVISOR CALL
target-s390: Convert MOVE LONG
target-s390: Convert FP LOAD
target-s390: Convert INSERT CHARACTER
target-s390: Cleanup cc computation helpers
target-s390: Convert INSERT CHARACTERS UNDER MASK
target-s390: Convert EXECUTE
target-s390: Convert FP STORE
target-s390: Convert CONVERT TO DECIMAL
target-s390: Convert SET SYSTEM MASK
target-s390: Convert LOAD PSW
target-s390: Convert DIAGNOSE
target-s390: Convert SHIFT, ROTATE SINGLE
target-s390: Convert SHIFT DOUBLE
target-s390: Convert LOAD, STORE MULTIPLE
target-s390: Convert MOVE
target-s390: Convert NI, XI, OI
target-s390: Convert STNSM, STOSM
target-s390: Convert LAM, STAM
target-s390: Convert CLCLE, MVCLE
target-s390: Convert MVC
target-s390: Convert NC, XC, OC, TR, UNPK
target-s390: Convert CLC
target-s390: Convert MVCP, MVCS
target-s390: Convert LRA
target-s390: Convert SIGP
target-s390: Convert EFPC, STFPC
target-s390: Convert LCTL, STCTL
target-s390: Convert COMPARE AND SWAP
target-s390: Convert CLM
target-s390: Convert STCM
target-s390: Convert TPROT
target-s390: Convert LOAD CONTROL, part 2
target-s390: Convert LOAD REVERSED
target-s390: Convert STORE REVERSED
target-s390: Convert LLGT
target-s390: Convert FP ADD, COMPARE, LOAD TEST/ROUND/LENGTHENED
target-s390: Convert FP SUBTRACT
target-s390: Convert FP DIVIDE
target-s390: Convert FP MULTIPLY
target-s390: Convert MULTIPLY AND ADD, SUBTRACT
target-s390: Convert TEST DATA CLASS
target-s390: Convert FP LOAD COMPLIMENT, NEGATIVE, POSITIVE
target-s390: Convert FP SQUARE ROOT
target-s390: Convert LOAD ZERO
target-s390: Convert CONVERT TO FIXED
target-s390: Convert CONVERT FROM FIXED
target-s390: Convert FLOGR
target-s390: Convert LFPC, SFPC
target-s390: Convert IPM
target-s390: Convert CKSM
target-s390: Convert EAR, SAR
target-s390: Convert MVPG
target-s390: Convert CLST, MVST
target-s390: Convert SRST
target-s390: Convert STIDP
target-s390: Convert SCK
target-s390: Convert STCK
target-s390: Convert SCKC, STCKC
target-s390: Convert SPT, STPT
target-s390: Convert SPKA
target-s390: Convert PTLB
target-s390: Convert SPX, STPX
target-s390: Convert STAP
target-s390: Convert IPTE
target-s390: Convert ISKE
target-s390: Convert SSKE
target-s390: Convert RRBE
target-s390: Convert subchannel instructions
target-s390: Convert STURA
target-s390: Convert CSP
target-s390: Convert STCKE
target-s390: Convert SACF
target-s390: Convert STSI
target-s390: Convert STFL
target-s390: Convert LPSWE
target-s390: Convert SERVC
target-s390: Delete dead code from old translator
target-s390: Implement BRANCH ON INDEX
target-s390: Tidy s->op_cc handling
target-s390: Implement COMPARE AND BRANCH
target-s390: Implement RISBG
target-s390: Implement LDGR, LGDR
target-s390: Implement R[NOX]SBG
target-s390: Implement PREFETCH
target-s390: Implement COMPARE RELATIVE LONG
target-s390: Implement COMPARE AND TRAP
target-s390: Implement LOAD ON CONDITION
target-s390: Implement STORE ON CONDITION
target-s390: Implement CONVERT TO LOGICAL
target-s390: Implement CONVERT FROM LOGICAL
target-s390: Implement POPCNT
target-s390: Implement CPSDR
target-s390: Check insn operand specifications
target-s390: Implement LCDFR
target-s390: Use uint64_to_float128
target-s390: Implement SET ROUNDING MODE
target-s390: Implement LOAD/SET FP AND SIGNAL
target-s390: Fix cpu_clone_regs
target-s390: Optimize XC
target-s390: Optmize emitting discards
target-s390: Tidy comparisons
target-s390: Optimize ADDU/SUBU CC testing
target-s390: Optimize ADDC/SUBB
target-s390: Optimize get_address
target-s390: Perform COMPARE AND SWAP inline
target-s390: Use TCG_CALL_NO_WG for memory helpers
target-s390: Use TCG_CALL_NO_WG for floating-point helpers
target-s390: Use TCG_CALL_NO_WG for integer helpers
target-s390: Use TCG_CALL_NO_WG for misc helpers
target-s390: Use noreturn for exception and load_psw
target-s390: Claim maintainership
MAINTAINERS | 1 +
disas/s390.c | 173 +-
gdbstub.c | 78 +-
linux-user/main.c | 140 +-
linux-user/s390x/syscall.h | 2 +-
target-s390x/cc_helper.c | 335 +-
target-s390x/cpu.h | 167 +-
target-s390x/fpu_helper.c | 960 ++---
target-s390x/helper.c | 67 +-
target-s390x/helper.h | 220 +-
target-s390x/insn-data.def | 813 ++++
target-s390x/insn-format.def | 55 +
target-s390x/int_helper.c | 176 +-
target-s390x/mem_helper.c | 359 +-
target-s390x/misc_helper.c | 94 +-
target-s390x/translate.c | 8685 ++++++++++++++++++++----------------------
16 files changed, 6348 insertions(+), 5977 deletions(-)
create mode 100644 target-s390x/insn-data.def
create mode 100644 target-s390x/insn-format.def
next reply other threads:[~2013-01-06 19:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-06 19:19 Richard Henderson [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-01-06 19:15 [Qemu-devel] [PULL] target-s390x rewrite Richard Henderson
2013-01-12 16:12 ` Blue Swirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50E9CE29.8000205@twiddle.net \
--to=rth@twiddle.net \
--cc=agraf@suse.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.