From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] arm: mvebu: limit OpenBlocks AX3-4 to 1 GB of RAM
Date: Mon, 07 Jan 2013 13:27:40 +0100 [thread overview]
Message-ID: <50EABF3C.9020907@free-electrons.com> (raw)
In-Reply-To: <20130107113411.GV3392@lunn.ch>
On 01/07/2013 12:34 PM, Andrew Lunn wrote:
>> Image is also with an initramfs + appended DTB. My boot command is:
>>
>> tftp 1000000 192.168.0.14:uImage.armada-xp-openblocks-ax3-4; bootm
>>
>> So I'm loading to a different address than you.
>
> Hi Thomas
>
> Uboot tells me:
>
> DRAM: 3 GB
> CS 0: base 0x00000000 size 1 GB
> CS 2: base 0x40000000 size 1 GB
> CS 3: base 0x80000000 size 1 GB
> Addresses 14M - 0M are saved for the U-Boot usage.
>
> 1000000 would be towards the beginning of this area reserved for uboot.
>
> Could you try moving to somewhere outside of the first 14Mbytes and
> see if that helps.
I tried to load the kernel at the same address as you (0x80000000) and
it still hanged after 3 or 4 boots.
Now we have to be sure that we use the same .config and the same compiler.
My compiler is :
arm-linux-gnueabi-gcc -v
Using built-in specs.
COLLECT_GCC=arm-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/arm-linux-gnueabi/4.6/lto-wrapper
Target: arm-linux-gnueabi
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++
--prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
--with-gxx-include-dir=/usr/arm-linux-gnueabi/include/c++/4.6.3 --libdir=/usr/lib --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes
--enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-multilib --disable-sjlj-exceptions --with-arch=armv7-a --with-float=softfp --with-fpu=vfpv3-d16 --with-mode=thumb
--disable-werror --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=arm-linux-gnueabi --program-prefix=arm-linux-gnueabi-
--includedir=/usr/arm-linux-gnueabi/include --with-headers=/usr/arm-linux-gnueabi/include --with-libs=/usr/arm-linux-gnueabi/lib
Thread model: posix
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
>
> Thanks
> Andrew
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2013-01-07 12:27 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 16:04 arm: mvebu: DT fixes for 3.8 Thomas Petazzoni
2013-01-04 16:04 ` [PATCH 1/4] arm: mvebu: limit OpenBlocks AX3-4 to 1 GB of RAM Thomas Petazzoni
2013-01-04 17:26 ` Andrew Lunn
2013-01-04 17:31 ` Thomas Petazzoni
2013-01-04 17:37 ` Andrew Lunn
2013-01-04 18:03 ` Thomas Petazzoni
2013-01-06 21:36 ` Gregory CLEMENT
2013-01-06 22:53 ` Thomas Petazzoni
2013-01-07 9:47 ` Andrew Lunn
2013-01-07 11:07 ` Andrew Lunn
2013-01-07 11:26 ` Thomas Petazzoni
2013-01-07 11:34 ` Andrew Lunn
2013-01-07 12:27 ` Gregory CLEMENT [this message]
2013-01-07 13:22 ` Andrew Lunn
2013-02-26 15:20 ` Thomas Petazzoni
2013-02-27 7:03 ` Andrew Lunn
2013-02-27 8:33 ` Thomas Petazzoni
2013-01-04 16:04 ` [PATCH 2/4] arm: mvebu: Armada XP MV78230 has two cores, not one Thomas Petazzoni
2013-01-04 16:04 ` [PATCH 3/4] arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces Thomas Petazzoni
2013-01-04 16:04 ` [PATCH 4/4] arm: mvebu: indentation fixes for Armada 370/XP .dtsi files Thomas Petazzoni
2013-01-06 9:03 ` Andrew Lunn
2013-01-07 16:53 ` Thomas Petazzoni
2013-01-07 16:55 ` Jason Cooper
2013-01-07 17:04 ` Thomas Petazzoni
2013-01-07 17:08 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50EABF3C.9020907@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.