[U-Boot] [PATCH v4] SMDK5250: Enable VBus for USB 2.0 controller

[Minkyu Kang <mk7.kang@samsung.com>]

On 08/01/13 18:37, Vivek Gautam wrote:
> This patch enables Vbus required for USB 2.0 controller.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> 
> Changes from v3:
> 	- Rebased on top of u-boot-samsung/master.
> 
> Changes from v2:
> 	- Rebased on top of u-boot-usb/next
> 	- Enclosed the function definition for board_usb_vbus_init()
> 	  inside "CONFIG_USB_EHCI_EXYNOS"
> 
> Changes from v1:
> 	- Using the old school method of setting up gpio instead
> 	  of using the pinmux method, since the required gpio line
> 	  here is board specific.
> 
>  board/samsung/smdk5250/smdk5250.c |   19 +++++++++++++++++++
>  1 files changed, 19 insertions(+), 0 deletions(-)
> 

applied to u-boot-samsung.

Thanks,
Minkyu Kang.