[U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not

[Stefano Babic <sbabic@denx.de>]

On 09/01/2013 12:57, Otavio Salvador wrote:
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---

Hi Otavio,

> Changes in v5:
> - Change subject
> - Reword the warning
> 
> Changes in v4:
> - Use a warning, instead of error when failing to fetch fdt
> - Drop exit use
> - Fix netboot
> - Use fdt instead of ftd
> 
> Changes in v3:
> - Add loadfdt
> - Use loadfdt
> - Call exit to abort script
> 
> Changes in v2:
> - Allow use of dynamic/static ip
> - Allow force use, or not, of fdt
> - Change 'auto' to 'try'
> 

I get some problems:
- loadbootscript is not correctly set. In fact:

 env default -f -a
## Resetting to default environment
MX53LOCO U-Boot > pri mmcargs
mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}
loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};

There is still a '0' missing for mmcargs, and loadbootscript is not set.

Then there is a problem with netboot. It is set correctly, but "pri
netboot" crashes:

pri netboot
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes;
then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd}
${uimage}; if test ${boot_fdt} = yes; then if ${get_cmd} ${fdt_addr}
${fdt_file}; then bootm ${loadaddr} - ${fdt_addr}; else if test
${boot_fdt} = try; then bootm; else echo ERROR: Cannot load the DT;
exit; fi; fi; else bootm; fi;
prefetch abort
pc : [<203b6d78>]	   lr : [<203b6d74>]
sp : af565e00  ip : 00000000	 fp : 00000000
r10: 00000002  r9 : 00000000	 r8 : af565f58
r7 : af568c7c  r6 : 00000001	 r5 : 00000000  r4 : 6f6f6220
r3 : 00000083  r2 : 00000060	 r1 : af565cc0  r0 : 00000173
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

Then I do not understand the boot_fdt when set to try. I have imagined
that it tries to start a DT kernel, and if no fdt find is found, it
tries with a legacy kernel without fdt. But it does not try to load the
FDT file, because this is done only when boot_fdt = yes. When boot_fdt =
try, it starts always a legacy kernel.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================