All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, jbrenner@taosinc.com
Subject: Re: [PATCH 3/3] staging:iio:light:tsl2583 switch to kstrto and strtobool
Date: Sat, 12 Jan 2013 10:31:09 +0000	[thread overview]
Message-ID: <50F13B6D.5010708@kernel.org> (raw)
In-Reply-To: <1357489383-30811-4-git-send-email-jic23@kernel.org>

On 01/06/2013 04:23 PM, Jonathan Cameron wrote:
> Doing this results in cleaner code and better error handling.
> 
Ooops. kstotoul is a typo.  Not sure how I missed the build failure.
Will repost with that fixed in a few mins.

Sorry about that.

> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
> ---
>  drivers/staging/iio/light/tsl2583.c | 36 ++++++++++++++++++++++--------------
>  1 file changed, 22 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index 944db26..f45114f 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -493,15 +493,17 @@ static ssize_t taos_power_state_store(struct device *dev,
>  	struct device_attribute *attr, const char *buf, size_t len)
>  {
>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> -	unsigned long value;
> +	bool state;
> +	int ret;
>  
> -	if (strict_strtoul(buf, 0, &value))
> -		return -EINVAL;
> +	ret = strtobool(buf, &state);
> +	if (ret < 0)
> +		return ret;
>  
> -	if (value == 0)
> -		taos_chip_off(indio_dev);
> -	else
> +	if (state)
>  		taos_chip_on(indio_dev);
> +	else
> +		taos_chip_off(indio_dev);		
>  
>  	return len;
>  }
> @@ -527,9 +529,11 @@ static ssize_t taos_als_time_store(struct device *dev,
>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>  	struct tsl2583_chip *chip = iio_priv(indio_dev);
>  	unsigned long value;
> +	int ret;
>  
> -	if (strict_strtoul(buf, 0, &value))
> -		return -EINVAL;
> +	ret = kstrtoul(buf, 0, &value);
> +	if (ret < 0)
> +		return ret;
>  
>  	if ((value < 50) || (value > 650))
>  		return -EINVAL;
> @@ -564,9 +568,11 @@ static ssize_t taos_als_cal_target_store(struct device *dev,
>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>  	struct tsl2583_chip *chip = iio_priv(indio_dev);
>  	unsigned long value;
> +	int ret;
>  
> -	if (strict_strtoul(buf, 0, &value))
> -		return -EINVAL;
> +	ret = kstrotoul(buf, 0, &value);
> +	if (ret < 0)
> +		return ret;
>  
>  	if (value)
>  		chip->taos_settings.als_cal_target = value;
> @@ -578,12 +584,14 @@ static ssize_t taos_do_calibrate(struct device *dev,
>  	struct device_attribute *attr, const char *buf, size_t len)
>  {
>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> -	unsigned long value;
> +	bool cal;
> +	int ret;
>  
> -	if (strict_strtoul(buf, 0, &value))
> -		return -EINVAL;
> +	ret = strtobool(buf, &cal);
> +	if (ret < 0)
> +		return ret;
>  
> -	if (value == 1)
> +	if (cal)
>  		taos_als_calibrate(indio_dev);
>  
>  	return len;
> 

  reply	other threads:[~2013-01-12 10:31 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-06 16:23 [PATCH 0/3] staging:iio:tsl2583 update interfaces Jonathan Cameron
2013-01-06 16:23 ` [PATCH 1/3] staging:iio:light:tsl2583 use read_raw, write_raw hooks Jonathan Cameron
2013-01-06 16:23 ` [PATCH 2/3] staging:iio:light:tsl2583 apply in_ prefix to attributes Jonathan Cameron
2013-01-06 16:23 ` [PATCH 3/3] staging:iio:light:tsl2583 switch to kstrto and strtobool Jonathan Cameron
2013-01-12 10:31   ` Jonathan Cameron [this message]
  -- strict thread matches above, loose matches on Subject: below --
2013-01-12 10:42 [PATCH 0/3 V2] staging:iio:tsl2583 update interfaces Jonathan Cameron
2013-01-12 10:42 ` [PATCH 3/3] staging:iio:light:tsl2583 switch to kstrto and strtobool Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50F13B6D.5010708@kernel.org \
    --to=jic23@kernel.org \
    --cc=jbrenner@taosinc.com \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.