Re: PcTV Nanostick 290e -- DVB-C frontend only working after reconnecting the device

[Antti Palosaari <crope@iki.fi>]

On 01/16/2013 05:15 PM, Radoslaw Moszczynski wrote:
> With Ubuntu's 3.5 kernel, the DVB-C frontend is not registered at all --
> only DVB-T/T2 is available.
>
> I'll do some more testing with newer/older kernels over the next few days.

That is because of changed functionality, multi-frontend to 
single-frontend. As now there is only one frontend which supports all 
the standards. You should set desired standard using tool:
$ dvb-fe-tool --set-delsys=DVBC/ANNEX_A

I am not a big fan of that new method of setting frontend type, 
especially because there is now both old and new ways offered. That new 
method dropped also way to tell supported frontend capabilities to the 
userspace (anyway, almost all demods support all capabilities defined by 
standard, so it is not a big loss).

regards
Antti


>
> Regards-
>    -Radek
>
> -----Original Message-----
> From: Antti Palosaari [mailto:crope@iki.fi]
> Sent: Wednesday, January 16, 2013 3:37 PM
> To: Radoslaw Moszczynski
> Cc: linux-media@vger.kernel.org
> Subject: Re: PcTV Nanostick 290e -- DVB-C frontend only working after
> reconnecting the device
>
> On 01/16/2013 03:58 PM, Radoslaw Moszczynski wrote:
>> Hi,
>>
>> I'm not sure if this has been already reported, but I was playing
>> around with Nanostick 290e today and I encountered some weird behavior
>> with the DVB-C frontend.
>>
>> The DVB-C frontend only seems to work once after plugging in the device.
>> During subsequent uses, it fails to lock on to signal. However, you
>> can unplug the Nanostick, plug it back in, and it is able to lock on
>> again. But only once -- then you have to replug it again.
>>
>> The exact actions that I took:
>>
>> 1. Plug in the Nanostick.
>> 2. Run dvbstream to record a DVB-C stream -- works OK.
>> 3. Run dvbstream to record a DVB-C stream again -- fail to lock on signal.
>> 4. Unplug the Nanostick. Plug it back in.
>> 5. Run dvbstream to record a DVB-C stream -- works OK.
>> 6. Run dvbstream to record a DVB-C stream again -- fail to lock on signal.
>>
>> I'm using kernel 3.2.0 on Ubuntu x86. The DVB-T/T2 frontend doesn't
>> display this behavior.
>>
>> If anyone's interested in debugging this, I'll be happy to provide
>> more information.
>
> Could you test first quite latest Kernel, 3.7 or even 3.8. If 3.7 behaves
> similarly, then test older Kernel 3.0.
>
> Working only on first tuning attempt sounds like it should not be common
> problem - otherwise there should be million bug reports like that.
>
> regards
> Antti
>
> --
> http://palosaari.fi/
>
>


-- 
http://palosaari.fi/