From: John Morris <john@zultron.com>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: Xenomai <xenomai@xenomai.org>
Subject: Re: [Xenomai] 3.5.7 posix/mprotect fixed; (Was: posix/mprotect failure)
Date: Thu, 17 Jan 2013 21:56:35 -0600 [thread overview]
Message-ID: <50F8C7F3.8000406@zultron.com> (raw)
In-Reply-To: <50F505C3.3090803@xenomai.org>
On 01/15/2013 01:31 AM, Gilles Chanteperdrix wrote:
> On 01/15/2013 08:16 AM, John Morris wrote:
>> 1) "xddp_test" fails: "...IPCPROTO_XDDP): Address family not supported
>> by protocol". DRIVERS_RTIPC_XDDP is enabled in the config. Doesn't
>> look like others have experienced this before. LinuxCNC doesn't use
>> XDDP, but it should be fixed for the general audience.
>
>
> You are missing some kernel drivers. I used the following options in the
> Debian configuration: basically, all options enabled (some as module,
> because they are expected to be used less often).
>
> CONFIG_XENO_DRIVERS_RTIPC_XDDP=y
I think the problem was here. xddp was compiled in as a module in my
original config, and wasn't loaded by the test suite.
John
next prev parent reply other threads:[~2013-01-18 3:56 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-12 17:26 [Xenomai] Kernel OOPS during regression tests John Morris
2013-01-12 17:31 ` Gilles Chanteperdrix
2013-01-13 4:36 ` John Morris
2013-01-13 12:16 ` Gilles Chanteperdrix
2013-01-13 19:14 ` [Xenomai] 3.5.7 "I-pipe: could not find timer" (Was: Re: Kernel OOPS during regression tests) John Morris
2013-01-13 19:41 ` Gilles Chanteperdrix
2013-01-14 4:47 ` [Xenomai] 3.5.7 posix/mprotect failure; "I-pipe: could not find timer" fixed! John Morris
2013-01-14 11:57 ` Gilles Chanteperdrix
2013-01-14 12:00 ` Jan Kiszka
2013-01-14 13:36 ` Jan Kiszka
2013-01-14 20:52 ` John Morris
2013-01-14 22:54 ` Gilles Chanteperdrix
2013-01-15 7:16 ` [Xenomai] 3.5.7 posix/mprotect fixed; (Was: posix/mprotect failure) John Morris
2013-01-15 7:31 ` Gilles Chanteperdrix
2013-01-18 3:56 ` John Morris [this message]
2013-01-18 4:31 ` Gilles Chanteperdrix
2013-01-14 19:50 ` [Xenomai] 3.5.7 posix/mprotect failure; "I-pipe: could not find timer" fixed! Gilles Chanteperdrix
2013-01-14 20:56 ` John Morris
2013-01-14 22:57 ` Gilles Chanteperdrix
2013-01-14 12:00 ` [Xenomai] 3.5.7 "I-pipe: could not find timer" (Was: Re: Kernel OOPS during regression tests) Jan Kiszka
2013-01-14 18:50 ` Gilles Chanteperdrix
2013-01-14 19:13 ` Jan Kiszka
2013-01-14 19:15 ` Gilles Chanteperdrix
2013-01-14 19:37 ` Jan Kiszka
2013-01-14 20:39 ` Gilles Chanteperdrix
2013-01-15 11:35 ` Jan Kiszka
2013-01-15 12:06 ` Gilles Chanteperdrix
2013-01-15 12:09 ` Philippe Gerum
2013-01-15 12:21 ` Jan Kiszka
2013-01-15 13:44 ` Philippe Gerum
2013-01-15 13:48 ` Jan Kiszka
2013-01-15 13:58 ` Philippe Gerum
2013-01-15 14:10 ` Jan Kiszka
2013-01-15 19:39 ` Gilles Chanteperdrix
2013-01-16 8:02 ` Jan Kiszka
2013-01-16 8:44 ` Jan Kiszka
2013-01-16 9:41 ` Philippe Gerum
2013-01-16 9:48 ` Jan Kiszka
2013-01-16 10:37 ` Philippe Gerum
2013-01-16 12:03 ` Gilles Chanteperdrix
2013-01-16 12:18 ` Jan Kiszka
2013-01-15 13:59 ` Jan Kiszka
2013-01-12 19:02 ` [Xenomai] Kernel OOPS during regression tests Gilles Chanteperdrix
2013-01-13 6:50 ` John Morris
2013-01-13 11:23 ` Jan Kiszka
2013-01-13 12:18 ` Gilles Chanteperdrix
2013-01-13 19:34 ` [Xenomai] 3.5.3 posix/mprotect fail "sigdebug_handler triggered" (Was: Re: Kernel OOPS during regression tests) John Morris
2013-01-13 19:42 ` Gilles Chanteperdrix
2013-01-12 19:03 ` [Xenomai] Kernel OOPS during regression tests Gilles Chanteperdrix
2013-01-13 4:40 ` John Morris
2013-01-13 13:53 ` Gilles Chanteperdrix
2013-01-13 19:36 ` [Xenomai] SMI workarounds in one-size-fits-all kernel packages (Was: Re: Kernel OOPS during regression tests) John Morris
2013-01-13 19:45 ` Gilles Chanteperdrix
2013-01-14 5:33 ` John Morris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F8C7F3.8000406@zultron.com \
--to=john@zultron.com \
--cc=gilles.chanteperdrix@xenomai.org \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.