From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <50FEF361.4000705@xenomai.org> Date: Tue, 22 Jan 2013 21:15:29 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <50B88506.6000002@xenomai.org> <50B8F21B.5090503@xenomai.org> <50FE4116.8060508@zultron.com> In-Reply-To: <50FE4116.8060508@zultron.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Frustrating experience with Xenomai List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: John Morris Cc: xenomai@xenomai.org On 01/22/2013 08:34 AM, John Morris wrote: > Hi Willy, > > On 01/21/2013 06:43 PM, Willy Lambert wrote: >> Here is a first try. >> http://www.xenomai.org/index.php/Building_kernel >> Don't hesitate to comment/correct this. I will add some links later to : >> _ a good complete kernel building guide (if you have some please share) >> _ x86 configure hints wiki page. >> >> The end is a bit specific to Debian/Ubuntu distros. Is it a problem ? >> Should I rework this ? > > Nice write-up. I've done the same thing on the LinuxCNC website. Feel > free to comment, fix, borrow, ignore.... > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?XenomaiKernel Just a note about running the dohell script: dohell -m /tmp 100 is a light load If you can not run ltp (though it probably exists as a package for all distributions), you should at least use the -b argument to generate load with hackbench. -- Gilles.