From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <51061E69.9020104@zultron.com> Date: Mon, 28 Jan 2013 00:44:57 -0600 From: John Morris MIME-Version: 1.0 References: <50B88506.6000002@xenomai.org> <50B8F21B.5090503@xenomai.org> <50FE4116.8060508@zultron.com> <50FEF361.4000705@xenomai.org> In-Reply-To: <50FEF361.4000705@xenomai.org> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Frustrating experience with Xenomai List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: xenomai@xenomai.org On 01/22/2013 02:15 PM, Gilles Chanteperdrix wrote: > On 01/22/2013 08:34 AM, John Morris wrote: > >> Hi Willy, >> >> On 01/21/2013 06:43 PM, Willy Lambert wrote: >>> Here is a first try. >>> http://www.xenomai.org/index.php/Building_kernel >>> Don't hesitate to comment/correct this. I will add some links later to : >>> _ a good complete kernel building guide (if you have some please share) >>> _ x86 configure hints wiki page. >>> >>> The end is a bit specific to Debian/Ubuntu distros. Is it a problem ? >>> Should I rework this ? >> >> Nice write-up. I've done the same thing on the LinuxCNC website. Feel >> free to comment, fix, borrow, ignore.... >> >> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?XenomaiKernel > > > Just a note about running the dohell script: > dohell -m /tmp 100 is a light load > If you can not run ltp (though it probably exists as a package for all > distributions), you should at least use the -b argument to generate load > with hackbench. > Thanks, documentation updated for Deb-like distros. ltp seems not to be available for EL6, unfortunately. Does it make sense to package hackbench together with Xenomai in the RPM packages? John