From mboxrd@z Thu Jan  1 00:00:00 1970
From: Pavel Hofman <pavel.hofman@ivitera.com>
Subject: Re: M-Audio Audiophile 192 (ice1724)'s broken spdif
 capture
Date: Mon, 28 Jan 2013 13:52:10 +0100
Message-ID: <5106747A.5070803@ivitera.com>
References: <CAF+J8LeejgAx6vs0Ee8svWpmGYyk3-7SK+mE1ev-bWXYy-7v6Q@mail.gmail.com>
 <51042EE5.5070900@perex.cz>
 <7adcf466397b198e2e079e35b47686bc.squirrel@mail.insite.cz>
 <CAF+J8LduUEPqaguteL0oyiACXa4jVXGTVVTCm4Tw=jMxRTmLWA@mail.gmail.com>
 <510644E5.1040505@perex.cz>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <alsa-devel-bounces@alsa-project.org>
Received: from cable.insite.cz (static-84-242-75-189.net.upcbroadband.cz
 [84.242.75.189])
 by alsa0.perex.cz (Postfix) with ESMTP id 9CE59265293
 for <alsa-devel@alsa-project.org>; Mon, 28 Jan 2013 13:52:11 +0100 (CET)
In-Reply-To: <510644E5.1040505@perex.cz>
List-Unsubscribe: <http://mailman.alsa-project.org/mailman/options/alsa-devel>,
 <mailto:alsa-devel-request@alsa-project.org?subject=unsubscribe>
List-Archive: <http://mailman.alsa-project.org/pipermail/alsa-devel/>
List-Post: <mailto:alsa-devel@alsa-project.org>
List-Help: <mailto:alsa-devel-request@alsa-project.org?subject=help>
List-Subscribe: <http://mailman.alsa-project.org/mailman/listinfo/alsa-devel>,
 <mailto:alsa-devel-request@alsa-project.org?subject=subscribe>
Errors-To: alsa-devel-bounces@alsa-project.org
Sender: alsa-devel-bounces@alsa-project.org
To: Jaroslav Kysela <perex@perex.cz>
Cc: alsa-devel <alsa-devel@alsa-project.org>, Jonas Petersen <jnsptrsn1@gmail.com>
List-Id: alsa-devel@alsa-project.org

On 28.1.2013 10:29, Jaroslav Kysela wrote:
> Date 27.1.2013 16:49, Jonas Petersen wrote:
>> in ap192_ak4114_init() of revo.c I see this:
>> 
>> ---- static const unsigned char ak4114_init_vals[] = { AK4114_RST |
>> AK4114_PWN | AK4114_OCKS0 | AK4114_OCKS1, AK4114_DIF_I24I2S, 
>> AK4114_TX1E, AK4114_EFH_1024 | AK4114_DIT | AK4114_IPS(1), 0, 0 }; 
>> static const unsigned char ak4114_init_txcsb[] = { 0x41, 0x02,
>> 0x2c, 0x00, 0x00 }; ----
>> 
>> Something wrong here maybe?
>> 
>> I noticed that the ak4114_init_vals array has 6 values but in 
>> ap192_ak4114_init() 7 values get written to ak4114.regmap.
> 
> Looking to the AK4114 datasheet. I would try the clock mode 2 
> (CM1=1,CM0=0) and also, check if there is a 11.2896Mhz crystal used
> for the reference clock (XTL1, XTL0). Also, the note in revo.c that
> the input rate reported by AK4114 is unstable, clearly shows that the
> clock logic is screwed (misconfigured).


The crystal is not used
http://www.nix.ru/autocatalog/m_audio_midiman_sound/34397_2245_draft.jpg
. IME ak411x cards without the auxiliary Xiling fpga do not provide the
independent clock from ak411X and thus cannot report the input rate
correctly. That is why I do not make use of the value in the driver
(ak->check_flags = AK4114_CHECK_NO_RATE)

Jonas, please could you check if ak4114 pins XTL0/1 (10, 11) are
connected to logical high? They should be :)

Regards,

Pavel.