From: Ben Greear <greearb@candelatech.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: WARNING: at net/mac80211/agg-tx.c:625 (3.7.5)
Date: Tue, 29 Jan 2013 16:55:16 -0800 [thread overview]
Message-ID: <51086F74.4060603@candelatech.com> (raw)
In-Reply-To: <1359496537.8108.23.camel@jlt4.sipsolutions.net>
On 01/29/2013 01:55 PM, Johannes Berg wrote:
> On Tue, 2013-01-29 at 13:50 -0800, Ben Greear wrote:
>> On 01/29/2013 01:46 PM, Johannes Berg wrote:
>>> On Tue, 2013-01-29 at 13:44 -0800, Ben Greear wrote:
>>>> This is in 3.7.5, plus one ath9k patch to over-ride eeprom regdomain.
>>>>
>>>> Code that causes this is here...I seem to have a good test case for
>>>> this currently, so if there is any other debugging I could put here
>>>> that would be useful, let me know.
>>>>
>>>> if (WARN_ON(!tid_tx)) {
>>>> ht_dbg(sdata, "addBA was not requested!\n");
>>>> goto unlock;
>>>> }
>>>
>>> Heh, I think Kalle just had the same. Do you have the ht_dbg()
>>> statements (i.e. HT debugging) enabled?
>>
>> No, it seems I do not.
>>
>> Want me to enable it?
>
> Please. Actually, if you can (and it applies) this patch would be
> helpful too:
> http://git.kernel.org/?p=linux/kernel/git/jberg/mac80211-next.git;a=commit;h=0a214d3f7e5041685ebff054628a4354bedd78c3
I added that, and the patch that allows two VAPs to register for
beacons so I can run both VAPs I have configured on this system...
I can grab more history if it helps...
[ 142.852997] vap0: delba from 00:0e:8e:32:12:cf (initiator) tid 0 reason code 37
[ 142.853110] vap0: switched off addBA timer for 00:0e:8e:32:12:cf tid 0
[ 142.853122] vap0: got addBA resp for 00:0e:8e:32:12:cf tid 0 but we already gave up
[ 142.853168] vap0: switched off addBA timer for 00:11:22:99:88:00 tid 0
[ 142.853192] vap0: got addBA resp for 00:11:22:99:88:00 tid 0 but we already gave up
[ 142.853219] vap0: Stopping Tx BA session for 00:0e:8e:32:12:cf tid 0
[ 142.853513] vap0: Stopping Tx BA session for 00:11:22:99:88:00 tid 0
[ 142.853769] vap0: Open BA session requested for 00:0e:8e:32:12:cf tid 0
[ 142.853961] vap0: Open BA session requested for 00:0e:8e:32:12:cf tid 0
[ 142.853976] vap0: BA request denied - session is not idle on 00:0e:8e:32:12:cf tid 0
[ 142.854166] vap0: Rx A-MPDU request on 00:0e:8e:32:12:cf tid 0 result 0
[ 142.854235] vap0: Open BA session requested for 00:0e:8e:32:12:cf tid 0
[ 142.854251] vap0: BA request denied - session is not idle on 00:0e:8e:32:12:cf tid 0
[ 142.854344] vap0: delba from 00:11:22:99:88:00 (initiator) tid 0 reason code 37
[ 142.854436] vap0: Rx A-MPDU request on 00:11:22:99:88:00 tid 0 result 0
[ 142.854556] ------------[ cut here ]------------
[ 142.863992] vap0: Open BA session requested for 00:11:22:99:88:00 tid 0
[ 142.864166] vap0: Open BA session requested for 00:11:22:99:88:00 tid 0
[ 142.864181] vap0: BA request denied - session is not idle on 00:11:22:99:88:00 tid 0
[ 142.864218] vap0: Open BA session requested for 00:11:22:99:88:00 tid 0
[ 142.864232] vap0: BA request denied - session is not idle on 00:11:22:99:88:00 tid 0
[ 142.864276] vap0: Open BA session requested for 00:11:22:99:88:00 tid 0
[ 142.864297] vap0: BA request denied - session is not idle on 00:11:22:99:88:00 tid 0
[ 142.864332] vap0: Open BA session requested for 00:11:22:99:88:00 tid 0
[ 142.864346] vap0: BA request denied - session is not idle on 00:11:22:99:88:00 tid 0
[ 142.866319] WARNING: at /home/greearb/git/linux-3.7.dev.y/net/mac80211/agg-tx.c:631 ieee80211_start_tx_ba_cb+0x1d2/0x220 [mac80211]()
[ 142.891075] Hardware name: To Be Filled By O.E.M.
[ 142.901277] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge veth ip_gre gre 8021q garp stp llc
macvlan pktgen fuse nfsv3 nfs_acl nfsv4 auth_rpcgss nfs fscache lockd sunrpc binfmt_misc uinput arc4 ath9k coretemp snd_hda_codec_realtek iTCO_wdt mac80211
iTCO_vendor_support gpio_ich snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device ath9k_common ath9k_hw snd_pcm ath lpc_ich microcode pcspkr i2c_i801
serio_raw cfg80211 snd_timer snd r8169 soundcore snd_page_alloc mii rfkill i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: iptable_nat]
[ 142.938975] Pid: 6, comm: kworker/u:0 Tainted: G C 3.7.5+ #36
[ 142.938980] Call Trace:
[ 142.939062] [<c04451bd>] warn_slowpath_common+0x6d/0xa0
[ 142.939100] [<f8e933b2>] ? ieee80211_start_tx_ba_cb+0x1d2/0x220 [mac80211]
[ 142.939160] [<f8e933b2>] ? ieee80211_start_tx_ba_cb+0x1d2/0x220 [mac80211]
[ 142.939202] [<c044520d>] warn_slowpath_null+0x1d/0x20
[ 142.939232] [<f8e933b2>] ieee80211_start_tx_ba_cb+0x1d2/0x220 [mac80211]
[ 142.939273] [<c049d64b>] ? trace_hardirqs_on+0xb/0x10
[ 142.939287] [<c09746df>] ? _raw_spin_unlock_irqrestore+0x3f/0x80
[ 142.939321] [<f8e977bf>] ieee80211_iface_work+0x20f/0x310 [mac80211]
[ 142.939364] [<c045de76>] process_one_work+0x1a6/0x3d0
[ 142.939377] [<c045de09>] ? process_one_work+0x139/0x3d0
[ 142.939389] [<c0460e58>] ? worker_thread+0x198/0x380
[ 142.939417] [<f8e975b0>] ? ieee80211_netdev_select_queue+0x10/0x10 [mac80211]
[ 142.939494] [<c0460dc2>] worker_thread+0x102/0x380
[ 142.939506] [<c0973362>] ? preempt_schedule+0x32/0x50
[ 142.939520] [<c046596c>] kthread+0xac/0xb0
[ 142.939532] [<c0460cc0>] ? manage_workers+0x2b0/0x2b0
[ 142.939543] [<c0974742>] ? _raw_spin_unlock_irq+0x22/0x50
[ 142.939559] [<c097a0b7>] ret_from_kernel_thread+0x1b/0x28
[ 142.939571] [<c04658c0>] ? __init_kthread_worker+0x60/0x60
[ 142.939587] ---[ end trace 0f04f0a807663584 ]---
[ 142.939594] vap0: addBA was not requested!
[ 142.939634] vap0: Stopping Tx BA session for 00:11:22:99:88:00 tid 0
[ 142.939648] vap0: unexpected callback to A-MPDU stop for 00:11:22:99:88:00 tid 0
[ 142.939671] vap0: delba from 00:11:22:99:88:00 (initiator) tid 0 reason code 37
[ 142.939682] vap0: Rx BA session stop requested for 00:11:22:99:88:00 tid 0 inititator reason: 0
[ 142.939772] vap0: Rx A-MPDU request on 00:11:22:99:88:00 tid 0 result 0
[ 142.939850] vap0: delba from 00:11:22:99:88:00 (initiator) tid 0 reason code 37
[ 142.939860] vap0: Rx BA session stop requested for 00:11:22:99:88:00 tid 0 inititator reason: 0
[ 142.939895] vap0: unexpected AddBA Req from 00:0e:8e:32:12:cf on tid 0
[ 142.939903] vap0: Rx BA session stop requested for 00:0e:8e:32:12:cf tid 0 recipient reason: 32
[ 142.940130] vap0: Rx A-MPDU request on 00:0e:8e:32:12:cf tid 0 result 0
[ 142.940240] vap0: Rx A-MPDU request on 00:11:22:99:88:00 tid 0 result 0
[ 142.940290] vap0: delba from 00:0e:8e:32:12:cf (initiator) tid 0 reason code 37
[ 142.940300] vap0: Rx BA session stop requested for 00:0e:8e:32:12:cf tid 0 inititator reason: 0
[ 142.940444] vap0: Rx A-MPDU request on 00:0e:8e:32:12:cf tid 0 result 0
>
> johannes
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next prev parent reply other threads:[~2013-01-30 0:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 21:44 WARNING: at net/mac80211/agg-tx.c:625 (3.7.5) Ben Greear
2013-01-29 21:46 ` Johannes Berg
2013-01-29 21:50 ` Ben Greear
2013-01-29 21:55 ` Johannes Berg
2013-01-30 0:55 ` Ben Greear [this message]
2013-01-31 13:24 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51086F74.4060603@candelatech.com \
--to=greearb@candelatech.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.