From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gerald Date: Thu, 31 Jan 2013 10:07:41 +0100 Subject: [Buildroot] Pandaboard ethernet In-Reply-To: References: <510A2BC5.6000905@gmail.com> Message-ID: <510A345D.6020901@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net In buildroot, where is the .config file for the kernel. It's a pandaboard ES card... Le 31/01/2013 09:52, Belisko Marek a ?crit : > On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov > wrote: > >> On Thu, Jan 31, 2013 at 9:31 AM, Gerald wrote: >> >>> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i >>> have no ethernet : >>> >>> ifconfig eth0 up : >>> SIOCGIFFLAGS: No such device. >>> >>> What is the driver of ethernet pandaboard and how-to use it ? >>> >> Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig: >> > Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in > this veriosion: > CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem? > >> ifconfig -a >> >> Yegor >> _______________________________________________ >> buildroot mailing list >> buildroot at busybox.net >> http://lists.busybox.net/mailman/listinfo/buildroot >> > Cheers, > > mbe > >