From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:53766 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755453Ab3AaSx1 (ORCPT ); Thu, 31 Jan 2013 13:53:27 -0500 Message-ID: <510ABD7F.6030200@iki.fi> Date: Thu, 31 Jan 2013 20:52:47 +0200 From: Antti Palosaari MIME-Version: 1.0 To: Andre Heider CC: Jose Alberto Reguero , Gianluca Gennari , LMML Subject: Re: af9035 test needed! References: <50F05C09.3010104@iki.fi> <510A78D8.7030602@iki.fi> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Jose, Gianluca, On 01/31/2013 08:40 PM, Andre Heider wrote: > Hey, > > On Thu, Jan 31, 2013 at 2:59 PM, Antti Palosaari wrote: >>> On Fri, Jan 11, 2013 at 7:38 PM, Antti Palosaari wrote: >>>> >>>> Could you test that (tda18218 & mxl5007t): > > only now I see you mentioned mxl5007t too, and with the same tree as I > used for my 'TerraTec Cinergy T Stick Dual RC (rev. 2)', a 'AVerMedia > HD Volar (A867)' with a mxl5007t (and an unkown rev) works too: > > usb 3-3.1.4: new high-speed USB device number 7 using xhci_hcd > usb 3-3.1.4: New USB device found, idVendor=07ca, idProduct=1867 > usb 3-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 3-3.1.4: Product: A867 > usb 3-3.1.4: Manufacturer: AVerMedia TECHNOLOGIES, Inc > usb 3-3.1.4: SerialNumber: 0305770200261 > usb 3-3.1.4: af9035_identify_state: prechip_version=00 chip_version=03 > chip_type=3802 Who one as able to test with non-working AF9035 + MxL5007T combination. Does it report different chip versions? Same firmware used? > usb 3-3.1.4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold state > usb 3-3.1.4: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw' > usb 3-3.1.4: dvb_usb_af9035: firmware version=11.5.9.0 > usb 3-3.1.4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state > usb 3-3.1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream > to the software demuxer > DVB: registering new adapter (AVerMedia HD Volar (A867)) > i2c i2c-19: af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1 > usb 3-3.1.4: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))... > mxl5007t 19-0060: creating new instance > mxl5007t_get_chip_id: unknown rev (3f) > mxl5007t_get_chip_id: MxL5007T detected @ 19-0060 > Registered IR keymap rc-empty > input: AVerMedia HD Volar (A867) as > /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/rc/rc5/input29 > rc5: AVerMedia HD Volar (A867) as > /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/rc/rc5 > usb 3-3.1.4: dvb_usb_v2: schedule remote query interval to 500 msecs > usb 3-3.1.4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully > initialized and connected regards Antti -- http://palosaari.fi/