From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Hunter Subject: Re: DT GPMC SRAM and NOR flash support ? Date: Fri, 1 Feb 2013 11:12:06 -0600 Message-ID: <510BF766.5090608@ti.com> References: <510BF3D3.3000304@mimc.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bear.ext.ti.com ([192.94.94.41]:52931 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756373Ab3BARMJ (ORCPT ); Fri, 1 Feb 2013 12:12:09 -0500 In-Reply-To: <510BF3D3.3000304@mimc.co.uk> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Mark Jackson Cc: "linux-omap@vger.kernel.org" Hi Mark, On 02/01/2013 10:56 AM, Mark Jackson wrote: > There's plenty of DT support going in for NAND flash, but is there any work going on to support NOR > flash ? What board and device are you working that is using NOR? I have a OMAP2420 H4 with NOR that I have been doing a bit of maintenance for but I don't spend much time on it. Eventually it will have to be done but it is always good to know if there is a pressing need. > And how about SRAM chips or other memory mapped devices ? Not sure about SRAM (trying to think if I have a board with SRAM even), but definitely, boards using the GPMC to interface to ethernet chips need to be added. Cheers Jon