All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stratos Karafotis <stratosk@semaphore.gr>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: cpufreq@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold
Date: Tue, 05 Feb 2013 23:04:31 +0200	[thread overview]
Message-ID: <511173DF.8060308@semaphore.gr> (raw)

In order to avoid the calculation of up_threshold - down_differential
every time that the frequency must be decreased, we replace the
down_differential tuner with the adj_up_threshold which keeps the
difference across multiple checks.

Update the adj_up_threshold only when the up_theshold is also updated.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
---
 drivers/cpufreq/cpufreq_governor.h |  2 +-
 drivers/cpufreq/cpufreq_ondemand.c | 16 ++++++++++------
 2 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index f661654..4250944 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -108,7 +108,7 @@ struct od_dbs_tuners {
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
 	unsigned int up_threshold;
-	unsigned int down_differential;
+	unsigned int adj_up_threshold;
 	unsigned int powersave_bias;
 	unsigned int io_is_busy;
 };
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 7731f7c..2cc76ad 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -47,7 +47,8 @@ static struct cpufreq_governor cpufreq_gov_ondemand;
 static struct od_dbs_tuners od_tuners = {
 	.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
 	.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
-	.down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL,
+	.adj_up_threshold = DEF_FREQUENCY_UP_THRESHOLD -
+			    DEF_FREQUENCY_DOWN_DIFFERENTIAL,
 	.ignore_nice = 0,
 	.powersave_bias = 0,
 };
@@ -192,11 +193,9 @@ static void od_check_cpu(int cpu, unsigned int load_freq)
 	 * support the current CPU usage without triggering the up policy. To be
 	 * safe, we focus 10 points under the threshold.
 	 */
-	if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) *
-			policy->cur) {
+	if (load_freq < od_tuners.adj_up_threshold * policy->cur) {
 		unsigned int freq_next;
-		freq_next = load_freq / (od_tuners.up_threshold -
-				od_tuners.down_differential);
+		freq_next = load_freq / od_tuners.adj_up_threshold;
 
 		/* No longer fully busy, reset rate_mult */
 		dbs_info->rate_mult = 1;
@@ -351,6 +350,10 @@ static ssize_t store_up_threshold(struct kobject *a, struct attribute *b,
 			input < MIN_FREQUENCY_UP_THRESHOLD) {
 		return -EINVAL;
 	}
+	/* Calculate the new adj_up_threshold */
+	od_tuners.adj_up_threshold += input;
+	od_tuners.adj_up_threshold -= od_tuners.up_threshold;
+
 	od_tuners.up_threshold = input;
 	return count;
 }
@@ -507,7 +510,8 @@ static int __init cpufreq_gov_dbs_init(void)
 	if (idle_time != -1ULL) {
 		/* Idle micro accounting is supported. Use finer thresholds */
 		od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
-		od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
+		od_tuners.adj_up_threshold = MICRO_FREQUENCY_UP_THRESHOLD -
+					     MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
 		/*
 		 * In nohz/micro accounting case we set the minimum frequency
 		 * not depending on HZ, but fixed (very low). The deferred
-- 
1.8.1

             reply	other threads:[~2013-02-05 21:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-05 21:04 Stratos Karafotis [this message]
2013-02-06  5:35 ` [PATCH] cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold Viresh Kumar
2013-02-06 12:58   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=511173DF.8060308@semaphore.gr \
    --to=stratosk@semaphore.gr \
    --cc=cpufreq@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@sisk.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.