From: Knut Petersen <Knut_Petersen@t-online.de>
To: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Mauro Carvalho Chehab <mchehab@redhat.com>
Subject: possible recursive locking: find_ref_lock() / v4l2_ctrl_add_handler()
Date: Sun, 10 Feb 2013 11:34:11 +0100 [thread overview]
Message-ID: <511777A3.6000506@t-online.de> (raw)
Maybe somebody could have at that old locking warning:
[ 9.761427] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 9.782848] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 9.794205] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 9.879194] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
[ 9.914871] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 9.932037] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 9.953646] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.981718] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 9.996493] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.003354] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.007987] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.450310] tveeprom 9-0050: Hauppauge model 69100, rev B4C3, serial# 7900937
[ 10.453751] tveeprom 9-0050: MAC address is 00:0d:fe:78:8f:09
[ 10.457134] tveeprom 9-0050: tuner model is Conexant CX24118A (idx 123, type 4)
[ 10.460547] tveeprom 9-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 10.463936] tveeprom 9-0050: audio processor is None (idx 0)
[ 10.467320] tveeprom 9-0050: decoder processor is CX880 (idx 20)
[ 10.470648] tveeprom 9-0050: has no radio, has IR receiver, has no IR transmitter
[ 10.474038] cx88[0]: hauppauge eeprom: model=69100
[ 10.508060] Registered IR keymap rc-hauppauge
[ 10.518107] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0/input12
[ 10.526485] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0
[ 10.530869] cx88[0]/2: cx2388x 8802 Driver Manager
[ 10.534533] cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 17, latency: 32, mmio: 0xd2000000
[ 10.541221] cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 17, latency: 32, mmio: 0xd0000000
[ 10.545197] IR RC5(x) protocol handler initialized
[ 10.557935]
[ 10.560012] =============================================
[ 10.560012] [ INFO: possible recursive locking detected ]
[ 10.560012] 3.8.0-rc7-main #20 Not tainted
[ 10.560012] ---------------------------------------------
[ 10.560012] modprobe/469 is trying to acquire lock:
[ 10.560012] (hdl->lock){+.+...}, at: [<f85604f6>] find_ref_lock+0x1f/0x39 [videodev]
[ 10.560012]
[ 10.560012] but task is already holding lock:
[ 10.560012] (hdl->lock){+.+...}, at: [<f85622d3>] v4l2_ctrl_add_handler+0x35/0x91 [videodev]
[ 10.560012]
[ 10.560012] other info that might help us debug this:
[ 10.560012] Possible unsafe locking scenario:
[ 10.560012]
[ 10.560012] CPU0
[ 10.560012] ----
[ 10.560012] lock(hdl->lock);
[ 10.560012] lock(hdl->lock);
[ 10.560012]
[ 10.560012] *** DEADLOCK ***
[ 10.560012]
[ 10.560012] May be due to missing lock nesting notation
[ 10.560012]
[ 10.560012] 3 locks held by modprobe/469:
[ 10.560012] #0: (&__lockdep_no_validate__){......}, at: [<c03cbcfc>] __driver_attach+0x31/0x6b
[ 10.560012] #1: (&__lockdep_no_validate__){......}, at: [<c03cbd08>] __driver_attach+0x3d/0x6b
[ 10.560012] #2: (hdl->lock){+.+...}, at: [<f85622d3>] v4l2_ctrl_add_handler+0x35/0x91 [videodev]
[ 10.560012]
[ 10.560012] stack backtrace:
[ 10.560012] Pid: 469, comm: modprobe Not tainted 3.8.0-rc7-main #20
[ 10.560012] Call Trace:
[ 10.560012] [<c01272cb>] ? console_unlock+0x34b/0x374
[ 10.560012] [<c015b25a>] __lock_acquire+0x1314/0x138a
[ 10.560012] [<c015bc94>] ? mark_held_locks+0xa1/0xc8
[ 10.560012] [<f85604f6>] ? find_ref_lock+0x1f/0x39 [videodev]
[ 10.560012] [<c015b703>] lock_acquire+0xaf/0xcd
[ 10.560012] [<f85604f6>] ? find_ref_lock+0x1f/0x39 [videodev]
[ 10.560012] [<f85604f6>] ? find_ref_lock+0x1f/0x39 [videodev]
[ 10.560012] [<c04f8ae0>] mutex_lock_nested+0x3a/0x266
[ 10.560012] [<f85604f6>] ? find_ref_lock+0x1f/0x39 [videodev]
[ 10.560012] [<c04f8cc8>] ? mutex_lock_nested+0x222/0x266
[ 10.560012] [<c04f8cf1>] ? mutex_lock_nested+0x24b/0x266
[ 10.560012] [<f85604f6>] find_ref_lock+0x1f/0x39 [videodev]
[ 10.560012] [<f8560db7>] handler_new_ref+0x38/0x143 [videodev]
[ 10.560012] [<f856230b>] v4l2_ctrl_add_handler+0x6d/0x91 [videodev]
[ 10.560012] [<f85c2961>] cx8800_initdev+0x329/0x673 [cx8800]
[ 10.560012] [<c04fd581>] ? sub_preempt_count+0x90/0x9d
[ 10.560012] [<c04faa54>] ? _raw_spin_unlock_irqrestore+0x44/0x5b
[ 10.560012] [<c03d0acd>] ? __pm_runtime_resume+0x40/0x48
[ 10.560012] [<c02e6ca4>] pci_device_probe+0x5f/0x96
[ 10.560012] [<c03cbbe7>] driver_probe_device+0x8f/0x173
[ 10.560012] [<c03cbd1a>] __driver_attach+0x4f/0x6b
[ 10.560012] [<c03ca895>] bus_for_each_dev+0x44/0x66
[ 10.560012] [<c03cb82f>] driver_attach+0x1c/0x21
[ 10.560012] [<c03cbccb>] ? driver_probe_device+0x173/0x173
[ 10.560012] [<c03cb4a8>] bus_add_driver+0x9d/0x1c3
[ 10.560012] [<c03cbf73>] driver_register+0x77/0xe2
[ 10.560012] [<c02dac08>] ? __raw_spin_lock_init+0x26/0x49
[ 10.560012] [<c02e6d84>] __pci_register_driver+0x4a/0x4d
[ 10.560012] [<f85ca000>] ? 0xf85c9fff
[ 10.560012] [<f85ca026>] cx8800_init+0x26/0x1000 [cx8800]
[ 10.560012] [<c0101093>] do_one_initcall+0x75/0x11e
[ 10.560012] [<f85ca000>] ? 0xf85c9fff
[ 10.560012] [<f85ca000>] ? 0xf85c9fff
[ 10.560012] [<c01638ed>] load_module+0x1669/0x198d
[ 10.560012] [<c0163c96>] sys_init_module+0x85/0x87
[ 10.560012] [<c04fae5d>] syscall_call+0x7/0xb
[ 10.749996] cx88[0]/0: registered device video0 [v4l2]
[ 10.754891] cx88[0]/0: registered device vbi0
[ 10.759328] lirc_dev: IR Remote Control driver registered, major 250
[ 10.763449] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 10.765473] IR LIRC bridge handler initialized
[ 10.778474] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 10.780512] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 10.785004] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
[ 10.787046] cx88[0]/2: cx2388x based DVB/ATSC card
[ 10.794436] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 10.812315] DVB: registering new adapter (cx88[0])
[ 10.814427] cx88-mpeg driver manager 0000:05:05.2: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
Affected kernels
=============
at least 3.6.*, 3.7.*, 3.8.-rc*
Hardware / Software
================
opensuse 12.1 running on an AOpen i915GMm-hfs, Pentium M Dothan, 2GB system.
DVB-S hardware
=============
Hauppauge WinTV Nova HD-S2:
05:05.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Device 6906
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Unknown large resource type 04, will not decode more.
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx8800
05:05.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 6906
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
05:05.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 6906
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88-mpeg driver manager
05:05.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 6906
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
cu,
Knut
next reply other threads:[~2013-02-10 10:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-10 10:34 Knut Petersen [this message]
2013-02-10 10:54 ` possible recursive locking: find_ref_lock() / v4l2_ctrl_add_handler() Hans Verkuil
2013-02-10 13:24 ` Andy Walls
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=511777A3.6000506@t-online.de \
--to=knut_petersen@t-online.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.