From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/5] Add support for using an UBI volume for environment
Date: Mon, 11 Feb 2013 11:39:19 +0100 [thread overview]
Message-ID: <5118CA57.4010804@denx.de> (raw)
In-Reply-To: <1360354046-32392-1-git-send-email-joe.hershberger@ni.com>
Hi Joe,
On 02/08/2013 09:07 PM, Joe Hershberger wrote:
> NAND is not good at handling absolute addresses to sectors for storing
> particular data. The current implementation of the NAND env support
> works around this in several ways such as storing a pointer to the
> sector in the OOB of the first sector (interferes with some CRC) or
> supporting a range of sectors (which unless it is huge is not
> guaranteed to be safe). None of these options address wear-leveling
> concerns or bad block handling.
>
> Accessing the u-boot env from UBI eliminates these concerns. However,
> it does require some of the basic settings for finding the UBI env to
> be in the default u-boot env.
Great. I'll review the patches in a bit and will send some comments.
Thanks,
Stefan
next prev parent reply other threads:[~2013-02-11 10:39 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 20:07 [U-Boot] [PATCH 0/5] Add support for using an UBI volume for environment Joe Hershberger
2013-02-08 20:07 ` [U-Boot] [PATCH 1/5] ubi: Expose a few simple functions from the cmd_ubi Joe Hershberger
2013-02-11 10:45 ` Stefan Roese
2013-02-08 20:07 ` [U-Boot] [PATCH 2/5] ubi: ubifs: Turn off verbose prints Joe Hershberger
2013-02-11 10:52 ` Stefan Roese
2013-03-20 10:07 ` Joe Hershberger
2013-03-20 10:14 ` Stefan Roese
2013-03-20 10:19 ` Joe Hershberger
2013-03-20 13:11 ` Tom Rini
2013-02-08 20:07 ` [U-Boot] [PATCH 3/5] mtd: Make mtdparts work with pre-reloc env Joe Hershberger
2013-02-11 10:53 ` Stefan Roese
2013-02-08 20:07 ` [U-Boot] [PATCH 4/5] env: Add support for UBI environment Joe Hershberger
2013-02-11 10:54 ` Stefan Roese
2013-02-08 20:07 ` [U-Boot] [PATCH 5/5] env: Add redundant env support to UBI env Joe Hershberger
2013-02-11 11:00 ` Stefan Roese
2013-02-11 10:39 ` Stefan Roese [this message]
2013-02-12 2:37 ` [U-Boot] [PATCH 0/5] Add support for using an UBI volume for environment Scott Wood
2013-02-12 16:04 ` Tom Rini
2013-02-12 18:10 ` Scott Wood
2013-02-18 18:27 ` Tom Rini
2013-03-26 21:53 ` [U-Boot] [PATCH v2 0/6] " Joe Hershberger
2013-03-26 21:53 ` [U-Boot] [PATCH v2 1/6] ubi: Fix broken cleanup code in attach_by_scanning Joe Hershberger
2013-03-26 21:53 ` [U-Boot] [PATCH v2 2/6] ubi: Expose a few simple functions from the cmd_ubi Joe Hershberger
2013-03-26 21:53 ` [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints Joe Hershberger
2013-04-02 10:46 ` Stefan Roese
2013-04-02 18:25 ` Tom Rini
2013-03-26 21:53 ` [U-Boot] [PATCH v2 4/6] mtd: Make mtdparts work with pre-reloc env Joe Hershberger
2013-03-26 21:53 ` [U-Boot] [PATCH v2 5/6] env: Add support for UBI environment Joe Hershberger
2013-03-26 21:53 ` [U-Boot] [PATCH v2 6/6] env: Add redundant env support to UBI env Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 1/7] ubi: Fix broken cleanup code in attach_by_scanning Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 2/7] ubi: Expose a few simple functions from the cmd_ubi Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 3/7] ubi: ubifs: Add documentation for README Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 4/7] ubi: ubifs: Turn off verbose prints Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 5/7] mtd: Make mtdparts work with pre-reloc env Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 6/7] env: Add support for UBI environment Joe Hershberger
2013-04-08 20:32 ` [U-Boot] [PATCH v3 7/7] env: Add redundant env support to UBI env Joe Hershberger
2013-04-11 22:26 ` [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment Tom Rini
2013-04-12 6:19 ` Stefan Roese
2013-04-12 11:30 ` Tom Rini
2013-04-12 12:52 ` Joe Hershberger
2013-04-12 14:14 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5118CA57.4010804@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.